• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.109-114
• /
• 2006

최근 들어 지구온난화 및 이상기후 등 기상이변으로 인해 빈번히 발생하고 있는 이상홍수에 대한 댐의 적극적인 대응을 위하여 댐 지역의 가능최대강수량(PMP) 및 가능최대홍수량(PMF)을 산정 수문학적 안정성을 검토하고, 이에 따른 댐의 치수능력 확보를 위해 구조적, 비구조적 계획을 수행하고 있으며, 이상호우로 인한 댐 붕괴 혹은 댐 하류하천 홍수범람 영향을 검토하여 인명과 재산 피해를 최소화하기 위한 침수예상지역의 비상대피계획(EAP)을 수립하고 있다. 본 연구에서는 이상홍수에 있어서 댐 치수능력 증대에 따른 댐 방류시 하류하천의 홍수범람 양상을 모의하기 위하여 1차원, 2차원 결합모형인 Mike Flood 모형을 이용하여 댐 하류하천의 홍수범람 분석을 실시하였다. Mike Flood 모형의 적용성을 검증하기 위해 1998년 8월 홍수시 서울시 우이천유역의 홍수범람 실측자료를 바탕으로 Mike Flood 모형을 모의를 수행한 결과 실제 조사된 홍수범람지역과 대체로 일치함을 알 수 있었다. 따라서, 댐 치수능력 증대에 따른 하류하천 영향을 검토하기 위해 Mike Flood 모형을 이용 수어댐에 적용하여 이상홍수시 하류하천 침수예상지역을 예측함으로써 이 지역의 비상대피계획 수립에 있어서 기초 자료로 활용할 수 있을 것이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1236-1240
• /
• 2006

Flooding is an inevitable problem for many cities. The study has depended on a combined approach of physically based modeling and GIS. The stream network is structured by MIKE11 for basis of a network and extended by MIKE21 to make like 2D analysis. This method is called alternative 2D analysis. In this study, one of area in Korea is used to analyze overflow of stream. Flood risk of the area looks like not so big because an elevation of this area is very high and slope is steep, but it is very dangerous area due to the typhoons. The tools to make flood risk map are MIKE11 and MIKE21 include GIS program. And map is expressed 3-D animation with MIKE Animator. As a result of this work, the flood risk map is made. And everyone who is not an expert can check dangerous area for flooding. At present, the method which is viable and easily confirmable must be promote because one of matters of common interest, which is of the general public, is the flood disaster.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.4
• /
• pp.75-83
• /
• 2007

Urbanized area has complex terrain with many flow paths. Almost stormwater is drained through pipe network because most area is impervious. And overland flow from the pipe network reform the surface flow. Therefore, it should be considered the drainage system and surface runoff both in urban inundation analysis. It is analyzed by using MIKE FLOOD integrated 1 dimension - 2 dimension model about Incheon Gyo urbanized watershed and compared with the results of 1 dimension model and 2 dimension model. At the result this approach linking of 2 dimension and 1 dimension pipe hydraulic model in MIKE FLOOD give accuracy that offers substantial improvement over earlier approach and more information about inundation such as water dapth, velocity or risk of flood, because it is possible to present storage of overland flow and topographical characteristic of area.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.4 s.38
• /
• pp.53-60
• /
• 2006

The purpose of this paper is forcasting of flooding area using LiDAR surveying data, and flood map for damage prevention is established for this purpose. Teahwa river at Ulsan city was chosen as test area and the flood simulation was produced in this area. For the flood simulation, each DEM using LiDAR data and digital map was established and then HEC model program and MIKE program was used to decide the amount of flood flowing and flood height. To improve the rainfall-overflow simulation confidence using inspection comparison of LiDAR data this paper analyzed and compared the LiDAR DEM accuracy and 1/5000 digital map DEM. The height accuracy is important factor to make flood map, however, LiDAR survey execution of all river area is not economic so, LiDAR survey execution of only important area is possible to be make high accuracy and economic flood map. The expectation effect of flood simulation is flood damage prevention and economic savings of recovery cost by forcasting of rainfall-overflow area and establishment of counter-measure.

• Water for future
• /
• v.46 no.6
• /
• pp.34-42
• /
• 2013

• Journal of Wetlands Research
• /
• v.13 no.1
• /
• pp.13-23
• /
• 2011

In this study, Mike11 will be used as the numerical model where a data assimilation method will be applied to it. This paper aims to gain an insight and understanding of data assimilation in flood forecasting models. It will start with a general discussion of data assimilation, followed by a description of the methodology and discussion of the statistical error forecast model used, which in this case is the linear regression. This error forecast model is applied to the water level forecast simulated by MIKE11 to produced improved forecast and validated against real measurements. It is found that there exists a phase error in the improved forecasts. Hence, 2 general formula are used to account for this phase error and they have shown improvement to the accuracy of the forecasts, where one improved the immediate forecast of up to 5 hours while the other improved the estimation of the peak discharge.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.862-866
• /
• 2005

For urban watershed models, the ILLUDAS and SWMM are the popular rainfall-runoff models used in Korea. However, combined sewage systems in urban areas produced problems when a flood occured because of the surcharged precipitation amount which drained to the streams directly. Also, the lack of pipe line data and the difficulties of modeling yield inappropriate modeling results in urban runoff analysis. In addition, rainfall-runoff models in urban areas which use channel routing could have inaccurate and complicated processes. In this paper, the MIKE SWMM model has been applied for the stable runoff analysis of urban areas. Watershed and pipe line data were established by using past inundated records, DEM data, and the numerical pipe line data. For runoff modelings, the runoff block was adapted to a basin and the Extran block using dynamic equations was applied to the sewage system. After comparing to models that exist, it is concluded that the MIKE SWMM model produces reliable and consistence results without distorting the Parameters of the model.

• Journal of Korea Water Resources Association
• /
• v.38 no.11
• /
• pp.907-916
• /
• 2005

For an urban watershed modeling, the ILLVDAS and SWMM model were the popular rainfall-runoff models using in Korea. However, combined sewerage systems in urban area produce some problems when a flood event happens because of the surcharged precipitation amounts which drain to streams directly. Also, rack of pipe line data and difficulties of modeling yield inappropriate modeling results in urban runoff analysis. In addition, rainfall-runoff models in an urban which using channel routing could be inaccurate and complicated processes. In this paper, the MIKE SWMM model has been applied for a stable urban area runoff analysis. Watershed and pipe line data were established by using past inundated records, DEM data and numerical pipe line data. For a runoff modeling, the Runoff block was adapted to a basin and the Extran block using dynamic equation was applied for sewerage system. After a comparisons against existing models yield that the MIKE SWMM model produce reliable and consistence results without distorting parameter of the model.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.4
• /
• pp.348-359
• /
• 2006

The city of Mokpo suffers lowland inundation damages by sea water flooding even without harsh weather like a typhoon, due to the low level urban infrastructure facilities, oceanic environmental changes by constructions of seadike/seawall and sea level rise caused by global warming. This study performs constructing the simulation system which employs the MIKE21 software. And the system is applied to several typhoon- induced surges which had resulted in inundation at Mokpo. Virtual situation of flooding is simulated in case 59 cm of surge height, which had been occurred actually by RUSA(0215), coincides with Approx. H.H.W. Then the water level of 545 cm corresponds to the extreme high water level(544 cm) for 10 year return period after the construction of Geumho seawall. The results show rapid and broad inundation at Inner-Port, requiring additional preparations for flood protections.

• Journal of Korea Water Resources Association
• /
• v.56 no.1
• /
• pp.53-62
• /
• 2023

Recently, due to the influence of climate change, the occurrence of damage to heavy rain is increasing around the world, and the frequency of heavy rain with a large amount of rain in a short period of time is also increasing. Heavy rains generate a large amount of outflow in a short time, causing flooding in the downstream part of the mountainous area before joining the small and medium-sized rivers. In order to reduce damage to downstream areas caused by flooding, it is very important to calculate the outflow of mountainous areas due to torrential rains. However, the sewage network flooding analysis, which is currently conducting the most analysis in Korea, uses the time and area method using the existing data rather than calculating the rainfall outflow in the mountainous area, which is difficult to determine that the soil characteristics of the region are accurately applied. Therefore, if the rainfall is analyzed for mountainous areas that can cause flooding in the downstream area in a short period of time due to large outflows, the accuracy of the analysis of flooding characteristics that can occur in the downstream area can be improved and used as data for evacuating residents and calculating the extent of damage. In order to calculate the rainfall outflow in the mountainous area, the rainfall outflow in the mountainous area was calculated using MIKE SHE among the MIKE series, and the flooding analysis in the downstream area was conducted through MIKE 21 FM (Flood model). Through this study, it was possible to confirm the amount of outflow and the time to reach downstream in the event of rainfall in the mountainous area, and the results of this analysis can be used to protect human and material resources through pre-evacuation in the downstream area in the future.