• Journal of Powder Materials
• /
• v.13 no.4 s.57
• /
• pp.263-268
• /
• 2006

In this study, the colloidal stability and sedimentation behavior of crystalline $TiO_2$ particles (300nm) in various organic solvents have been investigated by means of a backscattered light flux profile (Turbiscan). The backscattered light flux profiles revealed that the $TiO_2$ nanoparticles were readily sedimented in water, methyl alcohol, and ethyl alcohol due to a flocculation-induced particle growth, while a particle coalescence and a sedimentation of the $TiO_2$ nanoparticles were hardly observed in isopropyl alcohol. The migration velocities of the $TiO_2$ particle were measured as around 6.15/min, 12.53 m/min, 6.51m/min, and 0.18m/min for water, methyl alcohol, ethyl alcohol, and isopropyl alcohol, respectively, showing a remarkably slow migration of the $TiO_2$ particles in isopropyl alcohol.

• Journal of Powder Materials
• /
• v.24 no.1
• /
• pp.6-10
• /
• 2017

This study investigates the main growth mechanism of InP during InP/ZnS reaction of quantum dots (QDs). The size of the InP core, considering a synthesis time of 1-30 min, increased from the initial 2.56 nm to 3.97 nm. As a result of applying the proposed particle growth model, the migration mechanism, with time index 7, was found to be the main reaction. In addition, after the removal of unreacted In and P precursors from bath, further InP growth (of up to 4.19 nm (5%)), was observed when ZnS was added. The full width at half maximum (FWHM) of the synthesized InP/ZnS quantum dots was found to be relatively uniform, measuring about 59 nm. However, kinetic growth mechanism provides limited information for InP / ZnS core shell QDs, because the surface state of InP changes with reaction time. Further study is necessary, in order to clearly determine the kinetic growth mechanism of InP / ZnS core shell QDs.

• Korean Journal of Materials Research
• /
• v.19 no.11
• /
• pp.588-595
• /
• 2009

The knowledge of grain growth of carbide particles is very important for manufacturing micrograined cemented carbides. In the present study, continuous and discontinuous grain growth in WC-Co and WC-VC-Co cemented carbides is investigated using the Monte Carlo computer simulation technique. The Ostwald ripening process (solution/re-precipitation) and the grain boundary migration process are assumed in the simulation as the grain growth mechanism. The effects of liquid phase fraction, grain boundary energy and implanted coarse grain are examined. At higher liquid phase content, mass transfer via solid/liquid interfaces plays a major role in grain growth. Growth rate of the implanted grain was higher than that of the matrix grains through solution/re-precipitation and coalescence with neighboring grains. The results of these simulations qualitatively agree with experimental ones and suggest that distribution of liquid phase and carbide particle/carbide grain boundary energy as well as contamination by coarse grain are important factors controlling discontinuous grain growth in WC-Co and WC-VC-Co cemented carbides. The contamination by coarse grains must by avoided in the manufacturing process of fine grain cemented carbides, especially with low Co.

• Journal of Powder Materials
• /
• v.7 no.4
• /
• pp.237-243
• /
• 2000

The property and performance of the $Al_2O_3/Ni$ nanocomposites have been known to strongly depend on the structural feature of Ni nanodispersoids which affects considerably the structure of matrix. Such nanodispersoids undergo structural evolution in the process of consolidation. Thus, it is very important to understand the microstructural development of Ni nanodispersoids depending on the structure change of the matrix by consolidation. The present investigation has focused on the growth mechanism of Ni nanodispersoids in the initial stage of sintering. $Al_2O_3/Ni$ powder mixtures were prepared by wet ball milling and hydrogen reduction of $Al_2O_3$ and Ni oxide powders. Microstructural development and the growth mechanism of Ni dispersion during isothermal sintering were investigated depending on the porosity and structure of powder compacts. The growth mechanism of Ni was discussed based upon the reported kinetic mechanisms. It is found that the growth mechanism is closely related to the structural change of the compacts that affect material transport for coarsening. The result revealed that with decreasing porosity by consolidation the growth mechanism of Ni nanoparticles is changed from the migration-coalescence process to the interparticle transport mechanism.

• Korean Journal of Materials Research
• /
• v.10 no.11
• /
• pp.725-731
• /
• 2000

Recrystallization behaviors of cold-worked and $\beta$-quenched Zr-Zn alloys were investigated by the microhardness tests and microscopic examinations. The recrystallization of the $\beta$-quenched alloys was retarded in comparison with that of the cold-worked alloys, suggesting that the stored energy of the cold-worked alloys is larger than that of the $\beta$-quenched alloys. Although initial hardness for the cold-worked and the $\beta$-quenched specimens had an equal value, the recrystallization behaviors were observed to be quite different. Based on the transmission electron microscope(TEM) studies, it was suggested that the recrystallization of the cold-worked specimen would have occurred by subgrain coalescence while that of $\beta$-quenched specimen by strain-induced grain boundary migration.

• Archives of Craniofacial Surgery
• /
• v.12 no.2
• /
• pp.75-80
• /
• 2011

Deformities related with cleft lip are not only limited to the cleft site but also extended to all around the nasolabial region. Facial development is composed of several complex processes as the formation, migration, coalescence and interaction of separate fields. When there is a cleft event, it means there are general problems of those processes. As a result facial elements should have displacement, deformation and functional hypotrophy. These also affect the mucocutaneous structures, which result in the typical deformities of cleft lip. Traditional surgical methods are not sufficient of the correction of functional impairments in the cleft lip. Accordingly, there are relatively high possibilities of occurring secondary deformities. The Delaire's method focuses on repair of functional impairment of the cleft. Consequently, it can maintain the initial good surgical result and avoid the unnecessary incision scar. And this method can minimize secondary nasal deformities which can reduce the risk of additional nasal correction. Therefore authors introduce this advantageous the Delaire technique cheliolplasty which it can be widely used for the cleft lip correction in Korea.