• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.193-198
• /
• 2007

The NiSi is very promising candidate for the metallization in 60nm CMOS process such as FUSI(fully silicided) gate and source/drain contact because it exhibits non-size dependent resistance, low silicon consumption and mid-gap workfunction. Ni film was first deposited by using ALD (atomic layer deposition) technique with Bis-Ni precursor and $H_2$ reactant gas at $220^{\circ}C$ with deposition rate of $1.25{\AA}/cycle$. The as-deposited Ni film exhibited a sheet resistance of $5{\Omega}/{\square}$. RTP (repaid thermal process) was then performed by varying temperature from $400^{\circ}C$ to $900^{\circ}C$ in $N_2$ ambient for the formation of NiSi. The process window temperature for the formation of low-resistance NiSi was estimated from $600^{\circ}C$ to $800^{\circ}C$ and from $700^{\circ}C$ to $800^{\circ}C$ with and without Ti capping layer. The respective sheet resistance of the films was changed to $2.5{\Omega}/{\square}$ and $3{\Omega}/{\square}$ after silicidation. This is because Ti capping layer increases reaction between Ni and Si and suppresses the oxidation and impurity incorporation into Ni film during silicidation process. The NiSi films were treated by additional thermal stress in a resistively heated furnace for test of thermal stability, showing that the film heat-treated at $800^{\circ}C$ was more stable than that at $700^{\circ}C$ due to better crystallinity.

• Journal of Korean Home Economics Education Association
• /
• v.17 no.1 s.35
• /
• pp.69-84
• /
• 2005

The purpose of this study was to develop and evaluate the effectiveness of an educational program, based on the family life education theory and the needs of the adolescents, for the improvement of the relationship between adolescents and their parents. Aimed to be applicable in the actual school environment, the program was practiced and successfully proved its effectiveness. Named 'Parents and I : Is It Good This Way? Over the Generation Gap', the program is composed of themes such as 'Understanding the importance of the parent-child relationship', 'Understanding parents', and 'Having friendly communication with parents', and was practiced five times, once every week, at H girls' high school located in Seoul. An evaluation was done on adolescents to see the effectiveness of the parent-child relationship improvement program: there was a meaningful distinction between the results of the pre-test and the post-test. The participants responded that they could have a chance to understand their mid-aged parents and to express their feelings and thoughts, and evaluated that the anger-control program was a training for them to express their emotions in a rational way.

• The Korean Journal of Applied Statistics
• /
• v.21 no.6
• /
• pp.901-910
• /
• 2008

Incidence of Plasmodium vivax malaria in South Korea have been reemerged from mid-1990 and infected around 1600 patients annually recent years. The authors calculated the distribution of malaria infection and prevalence in South Korea using incidence (2001-2006) and incubation period distributions by a back-calculation formula and the least squares estimation method. The estimated infection has a normal distribution with a mean 207 and a standard deviation 30.7 days. In addition, the authors found the estimated daily average prevalence is 628.8 patients.

• Journal of Preventive Medicine and Public Health
• /
• v.42 no.2
• /
• pp.143-150
• /
• 2009

Objectives : South Korea has experienced unprecedented ups and downs in the sex ratio at birth(SRB), which has been a unique phenomenon in the last two decades. However, little is known about socioeconomic factors that influence the SRB. Employing the diffusion theory by Rogers, this study was undertaken to examine the trends in social variations in the SRB from 1981 to 2004 in Korea. Methods : The data was taken from Vital Birth Statistics for the period from 1981-2004. We computed the annual male proportion of live births according to the parental education(university, middle/high school, primary) and occupation(non-manual, manual, others). Logistic regression analysis was employed to estimate the odds ratios of male birth according to social position for the equidistant three time periods(1981-1984, 1991-1994, and 2001-2004). Results : An increased SRB was detected among parents with higher social position before the mid 1980s. Since then, however, a greater SRB was found for the less educated and manual jobholders. The inverse social gradient for the SRB was most prominent in early 1990s, but the gap has narrowed since the late 1990s. The mother's socioeconomic position could be a sensitive indicator of the social variations in the sex ratio at birth. Conclusions : Changes in the relationship of parental social position with the SRB were detected during the 1980-2004 in Korea. This Korean experience may well be explained by diffusion theory, suggesting there have been socioeconomic differences in the adoption and spread of sex-detection technology.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.1
• /
• pp.50-58
• /
• 2018

Intermittent demand is a demand with a pattern in which zero demands occur frequently and non-zero demands occur sporadically. This type of demand mainly appears in spare parts with very low demand. Croston's method, which is an initiative intermittent demand forecasting method, estimates the average demand by separately estimating the size of non-zero demands and the interval between non-zero demands. Such smoothing type of forecasting methods can be suitable for mid-term or long-term demand forecasting because those provides the same demand forecasts during the forecasting horizon. However, the smoothing type of forecasting methods aims at short-term forecasting, so the estimated average forecast is a factor to decrease accuracy. In this paper, we propose a forecasting method to improve short-term accuracy by improving Croston's method for intermittent demand forecasting. The proposed forecasting method estimates both the non-zero demand size and the zero demands' interval separately, as in Croston's method, but the forecast at a future period adjusted by binomial weight according to occurrence probability. This serves to improve the accuracy of short-term forecasts. In this paper, we first prove the unbiasedness of the proposed method as an important attribute in forecasting. The performance of the proposed method is compared with those of five existing forecasting methods via eight evaluation criteria. The simulation results show that the proposed forecasting method is superior to other methods in terms of all evaluation criteria in short-term forecasting regardless of average size and dispersion parameter of demands. However, the larger the average demand size and dispersion are, that is, the closer to continuous demand, the less the performance gap with other forecasting methods.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1536-1539
• /
• 1994

The influence due to metallic particle contaminated on spacer surface is remarkable in the decreasing of dielectric strength in $SF_6$ GIS. In relation with this problem, We studied, AC flash-over voltage characteristics and breakdown mechanism are investigated under metallic particle initiated condition in $SF_6$ gas by varying the particle position, particle shape with a plane-plane electrode. The main results arc as follows 1. The small amount of the metallic particle in the gap do not make flash-over voltage to be influence, but the significant decrease of th flash-overed voltage is result in case of the big and long size of the metallic paraticle. 2. Influence of the flash-over voltage are lowest in the mid and are highest in the electrode of metallic particle position. 3. In case of the initiated metallie particle, The more the pressure are high, the more the recluced ratio of flash-over voltage are high. 4. The metallic particle shape which results in the reduced flash-over voltage forced the critical pressure to move in to the region of low pressure. 5. The existance of the metallic particle on the upper electrode side and high pressure make the decreasing ratio of flash-over voltage bigger than that of the ground side electrode.

• Journal of the Korea Society for Simulation
• /
• v.20 no.2
• /
• pp.67-76
• /
• 2011

Order picking in automotive service parts warehouses is considered to be the most labor-intensive operation. Such warehouses contain hundreds of thousands of items, but normally 20% of products contribute to about 80% of turnover according to Pareto's 80-20 principle. Therefore most fast moving items are located near an outbound area which is called the "Golden Zone". Order picking routing efficiency is related to productivity and labor cost. However, most companies use simple methods. In this paper, we describe a series of computational experiments over a set of test cases where, we compared various previously existing routing heuristics to an optimal algorithm. We focus on examining the influence of the golden zone on the performance and selection of routing methods. The results obtained show that the optimal routing method increases the productivity at least 17.2%, and all the routing methods have better performance as the pick up rate from the golden zone increases.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.529-534
• /
• 2020

The development of civilization is in line with evolution of cities and transportation technology caused by industrialization. Up to now, a city has been developed owing to transportation cost reduction and needs for land utilization as a limited core business district. Continuous increase of urban population density has accompanied by lots of problems socioeconomically such as rise of land value, traffic congestion, gap between the rich and poor, air pollution, etc. Those issues are difficult to be solved in existing city ecosystem. However, a clue for solving the problems could be found in there. The design of Seoul mid-night bus route was from analysis of movement of people in the rural area by using ICT so that a city ecosystem should be firstly analyzed for solving rural issues. If the cause of those is found, big data platform construction is required to raise the life quality of citizen and the problems could be solved. Big data should be located in the middle of the platform connected with every element of city based on ICT for real-time collection, analysis and application. This paper addresses construction of big data platform and its application for sustainable smart city.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.1
• /
• pp.11-18
• /
• 2015

Objective: The aim of this study was to understand the effects of phone weight on the typing performance and muscle recruitment in the neck and upper extremity while typing a text message with dominant hand. The iPhone4 and iPhone5 were compared due to their 28-gram differences in weight. Background: Too much use of a cellular phone can lead the musculoskeletal disorders in the upper extremity. Phone makers tend to make their new models bigger, lighter, faster and smarter. Method: Fourteen healthy volunteers without any history of neuromuscular disorders or ongoing pain who used their smartphone more than one year were recruited. A 112g phone (iPhone5) and a 142g phone (iPhone4) were used for typing the lyric of the Korean national anthem with their dominant hand. Typing duration, the typing error, the perceived fatigue, and preference was investigated. Muscle recruitment and the resting gap of neck (middle trapezius and levator scapula), shoulder (infraspinatus and mid deltoid), elbow (biceps brachii and brachioradialis), thumb (extensor and abductor policis brevis) were collected using surface electromyography. Typing error was counted and typing speed was calculated in characters per min. The data were analyzed using a paired t-test and chi-square (${\chi}^2$) analysis for the effects of phone weight on the typing performance parameters and muscle recruitment. Results: Typing text message with iPhone5 took longer but had less muscle recruitment in brachioradialis, and extensor policis brevis muscles. Lighter weight of iPhone5 made biceps brachii to rest less without increasing the mean %EMG. Conclusion/Application: Findings of this study can be valuable information for phone designers to develop more productive device and for smartphone users to prevent the musculoskeletal disorders in the upper extremities.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.12
• /
• pp.1559-1565
• /
• 2013

This study aims to investigate the dynamic interaction characteristics between Maglev vehicles and an elevated guideway. A more detailed model for the dynamic interaction of the vehicle/guideway is proposed. The proposed model incorporates a 3D full vehicle model based on prototyping, flexible guideway by a modal superposition method, and levitation electromagnets including the feedback controller into an integrated model. The proposed model was applied to an urban transit Maglev developed for a commercial application to analyze the dynamic response of the vehicle and guideway, and the effect of the surface roughness of the rail, mid-span guideway deflections, and air gap variations are then investigated from the numerical simulation.