• Journal of Soil and Groundwater Environment
• /
• 제17권1호
• /
• pp.8-12
• /
• 2012

This study is maintains the condition of high temperature (above $600^{\circ}C$) within a short time using on microwave and high temperature heating elements. And removal characteristics according to changes in soil moisture, microwave power and temperature through the decomposition of the contaminated soil by oil. The difficulty resolvability material was sort of lubricating oil having long carbocyclic (C18-C50) and TPH removal rate reached 85.2% at 6 kW and $700^{\circ}C$ and thus the contaminant was removed 1,788 mg/kg within a process time of 40 minutes. In the case of light oil, gasoline contaminated soil, the removal amount showed 567 mg/kg and the treatment rate reached 98.4% at 6 kW, $500^{\circ}C$ and 20 minute. In the case of non-resolvability reached TPH concentrations on 2,000 mg/kg of worrisome level of soil contamination in the 3 zones at 6 kW, $700^{\circ}C$ and 30 minute. At the time, showed up processing costs 8,173 won per ton.

• Journal of Ginseng Research
• /
• 제40권1호
• /
• pp.62-67
• /
• 2016

Background: Ginseng, which is widely used in functional foods and as an herbal medicine, has been reported to reduce the proliferation of prostate cancer cells by mechanisms that are not yet fully understood. Methods: This study was designed to investigate the changes in ginsenoside content in ginseng after treatment with a microwave-irradiation thermal process and to verify the anticancer effects of the extracts. To confirm the anticancer effect of microwave-irradiated processed ginseng (MG), it was tested in three human prostate cancer cell lines (DU145, LNCaP, and PC-3 cells). Involvements of apoptosis and autophagy were assessed using Western blotting. Results: After microwave treatment, the content of ginsenosides Rg1, Re, Rb1, Rc, Rb2, and Rd in the extracts decreased, whereas the content of ginsenosides 20(S)-Rg3, 20(R)-Rg3, Rk1, and Rg5 increased. Antiproliferation results for the human cancer cell lines treated with ginseng extracts indicate that PC-3 cells treated with MG showed the highest activity with an half maximal inhibitory concentration of $48{\mu}g/mL$. We also showed that MG suppresses the growth of human prostate cancer cell xenografts in athymic nude mice as an in vivo model. This growth suppression by MG is associated with the inductions of cell death and autophagy. Conclusion: Therefore, heat processing by microwave irradiation is a useful method to enhance the anticancer effect of ginseng by increasing the content of ginsenosides Rg3, Rg5, and Rk1.

• Preventive Nutrition and Food Science
• /
• 제9권4호
• /
• pp.330-335
• /
• 2004

Changes in functional constituents of rice germ prepared using three different heat pretreatments: roasting, steaming and microwave heating, were determined and compared with those of non-treated rice germ. The yield of rice germ oil increased generally and then decreased with increasing time for all three heat pretreatments, although the yields of rice germ oil varied among the three heat pretreatments. There were no major differences in fatty acid compositions among the rice germ oils subjected to the three different heat pretreatments. Levels of $\alpha$-tocopherol in rice germ oil increased up to about 1.5 times at 3 min of roasting and microwave heating, compared to control, and then decreased with increasing treatment time, but $\alpha$­tocopherol concentrations in rice germ oil gradually decreased with increasing steaming time. The contents of three phytosterols ($\beta$-sitosterol, stigmasterol and ergosterol) decreased progressively with increases in roasting and steaming time, while concentrations of the three phytosterols increased up to - 15$\%$ with 3 min of microwave process as compared to control, and then decreased thereafter. Levels of $\gamma$-oryzanol in rice germ oil decreased gradually with increasing time during all three different heat pretreatments. However, levels of $\gamma$ -aminobutyric acid (GABA) in rice germ decreased gradually with increasing roasting time, while those of GABA increased greatly up to about 2 times after 10 min of steaming process, and then decreased slowly thereafter. During microwave heating, the contents of GABA increased at 3 min of treatment time and then decreased. These results suggest that microwave heating may be the most suitable processing method to preserve functional constituents in rice germ.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권12호
• /
• pp.7395-7400
• /
• 2013

Objective: The long-term efficacy of microwave hyperthermia combined with chemoradiotherapy in treating nasopharyngeal carcinoma (NPC) with metastatic foci in cervical lymph nodes was evaluated. Methods: A total of 154 cases of N2 or N3 stage NPC were randomized into two groups: hyperthermia group (76 cases) and control group (78 cases). Both received cisplatin chemotherapy and radiotherapy. In addition, the hyperthermia group further received microwave hyperthermia to the metastatic cervical nodes with different patterns (before or after radiotherapy), heating temperatures (T90< $43^{\circ}C$ and $T90{\geq}43^{\circ}C$) and hyperthermia episodes (< 4 times, 4-10 times and > 10 times). Results: The 3-month and 5-year complete response (CR) rates of cervical lymph nodes in the hyperthermia group were significantly higher than those in the control group. The 5-year disease-free survival (DFS) rate and the 3-year / 5-year overall survival rate in the hyperthermia group were also significantly higher. There was no significant difference in 5-year metastatic rates. In the hyperthermia group, the 3-month and 5-year CR rates of T90< $43^{\circ}C$ treatment were significantly lower than with $T90{\geq}43^{\circ}C$ treatment. The CR rate was highest when the hyperthermia was performed 4-10 times. There were no significant differences in 3-month and 5-year CR rates between hyperthermia before or after radiotherapy treatment. Conclusion: Microwave hyperthermia combined with chemoradiotherapy can increase local control, DFS and 3, 5-year overall survival rates of patients with N2 ~ N3 stage NPC. The heating temperature should be over $43^{\circ}C$ with hyperthermia repeated 4-10 times.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제27권2호
• /
• pp.81-84
• /
• 2014

The bipolar resistive switching characteristics of resistive random access memory (ReRAM) based on $HfO_2$ thin films have been demonstrated by using Ag/$HfO_2$/Pt structured ReRAM device. MIcrowave irradiation (MWI) treatment at low temperature was employed in device fabrication with $HfO_2$ thin films as a transition layer. Compared to the as-deposited Ag/$HfO_2$/Pt device, highly improved uniformity characteristics of resistance values and operating voltages were obtained from the MWI treatment Ag/$HfO_2$/Pt ReRAM device. In addition, a stable DC endurance (> 100 cycles) and a high data retention (> $10^4$ sec) were achieved.

• Journal of the Korean Wood Science and Technology
• /
• 제23권1호
• /
• pp.35-41
• /
• 1995

Persimmon boards of 30mm thick were dried, their temperatures were monitored during drying with 490 and 200watt microwave, and the drying efficacy and problems were investigated. The effects of pretreatments such as presteaming and prefreezing were also examined. The persimmon green lumbers of 80% moisture content were dried to 10% for only 50~60 and 110 minutes with 49watt and 200watt microwave, respectively. Severe internal checks were, however, found in all boards. The presteamed boards collapsed on their surfaces earlier than the controls. It may attribute to the high temperature inside boards during microwave drying and the decrease of their internal tensile strength caused by the presteaming treatment. To increase the internal tensile strength of the pretreated boards and to reduce their internal checks, they were air-dried at room temperature. The air-dried boards could be dried to 10% moisture content clearly and free from defects with 200watt microwave. The heating efficiency were also calculated with the maximum weight loss per minute of 490watt and 200watt.

• Journal of environmental and Sanitary engineering
• /
• 제13권3호
• /
• pp.102-112
• /
• 1998

The fate of polynuclear aromatic hydrocarbons(PAMs) in soil has drawn increasing concern due to their toxic, carcinogenic, and mutagenic effects. These compounds have been most commonly carried into the soil in solvent, as in a coal tar or cresote. This study has been focused on the applicability of microwave treatment of soils contaminated by PAHs. Studies have been conducted with soil(particle diameter $150~500{\mu}m$), which was spiked with naphthalene, acenaphthene, fluorene, anthracene and pyrene, with different moisture contents. According to the results of the research, up to 95% removal efficiency of naphthalene was observed in 10% moisturized soil for five minutes microwave inducing And the removal efficiency of acenaphthene and fluorene were observed to be 88.9%, 67.2% in 30% moisturized soil, respectively. Due to the low vapor pressure, anthracene and pyrene showed the low removal efficiency. In case the powdered activated carbon was added to the soil as a sensitizer, anthracene and pyrene were decomposed into a various by-products. Decomposition rates of anthracene and pyrene were increased with incresing addition of a PAC to the soil. It is concluded that the developement of a microwave process to remediate soils contaminated with PAHs is foreseeable. But additional studies are also needed regarding continuous microwave heating process.

• Journal of Korean Society of Environmental Engineers
• /
• 제29권3호
• /
• pp.304-310
• /
• 2007

The purpose of this research was to investigate the effects of the co-treatment of municipal wastewater with microwave-irradiated excess sludge on the treatment efficiency and excess sludge production of the activated sludge process. When 250 mL of excess sludge with a MLSS concentration of approximately 2,000 mg/L was microwave-irradiated at $20^{\circ}C$ for $40\sim300$ sec by a microwave oven (2,450 MHz, 700 W), the temperature of the sludge increased at a rate of approximately $20^{\circ}C/min$ and the SCOD, TKN and T-P concentrations of the sludge showed the highest increase in the irradiation time of $40\sim130$ sec. And, the oxygen uptake rate measurement of the sludge microorganism suggested most of the microorganisms in the sludge were destroyed at an irradiation time above 130 sec(above $65^{\circ}C$). When the municipal wastewater and microwave-irradiated excess sludge was co-treated by the activated sludge process, almost no effect was observed in the pH and alkalinity of both the influent and effluent, but the influent concentrations of SS, COD, T-N and T-P increased. Even though the effluent SS, BOD and T-P concentrations showed almost no effect, the COD and TKN concentrations increased. The microbial yield coefficient decreased at a rate of 0.91 g SS/g COD removed as the irradiation ratio increased at a rate of 1 g SS/g SS-day.

• Journal of Electrochemical Science and Technology
• /
• 제13권3호
• /
• pp.390-397
• /
• 2022

The use of microwaves as the energy source for synthesis and sintering of ceramics offers substantial advantages compared to conventional gas-fired and electric resistance furnaces. Benefits include much shorter processing times and reaching the sintering temperature more quickly, resulting in superior final product quality. Most oxide ceramics poorly interact with microwave irradiation at low temperatures; thus, a more complex setup including a susceptor is needed, which makes the whole process very complicated. This investigation pursued a new approach, which enabled us to use microwave irradiation directly in poorly coupled oxides. In many solid-state electrochemical devices, the support is either metal or can be reduced to metal. Metal powders in the support can act as an internal susceptor and heat the entire cell. Then sufficient interaction of microwave irradiation and ceramic material can occur as the sample temperature increases. This microwave heating and exothermic reaction of oxidation of the support can sinter the ceramic very efficiently without any external susceptor. In this study, yttria stabilized zirconia (YSZ) and a Ni-YSZ cermet support were used as an example. The cermet was used as the support, and a YSZ electrolyte was coated and sintered directly using microwave irradiation without the use of any susceptor. The results were compared to a similar cell prepared using a conventional electric furnace. The leakage test and full cell power measurement results revealed a fully leak-free electrolyte. Scanning electron microscopy and density measurements show that microwave sintered samples have lower open porosity in the electrode support than conventional heat treatment. This technique offers an efficient way to directly use microwave irradiation to sinter thin film ceramics without a susceptor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1113-1115
• /
• 2002

Mesoporous silica, MCM-41, was synthesized by sol-gel method. The organic structure-directing agent must be removed to make the desired proes. To achieve this, alternative calcination method using microwave oven was adapted to this removal stage. Microwave calcination was shown to provide a novel, rapid and inexpensive method of praparing nanoporous material. It was studied how the porous structure, surface area and pore size distribution were changes under microwave calcination.