• 자원리싸이클링
• /
• 제9권6호
• /
• pp.31-35
• /
• 2000

Mn-Zn ferrite 폐기물을 시멘트와 혼합한 복합전파흡수체를 제작하여 재료정수 및 반사감쇠량을 조사하였다. 지지재로 사용한 시멘트는 실리콘 고무의 재료정수와 비교하여 높은 복소유전율($\varepsilon$=$_{r}$': 7.6, $\varepsilon_{r}$ ": 0.6)을 나타내었고, Mn-Zn ferrite 폐기물과 시멘트의 혼합무게비(F/C)가 증가함에 따라 복소유전율은 감소하였고, 복소투자율은 증가하였다. 최대반사감쇠량을 나타내는 주파수는 F/C가 1에서 3으로 증가함에 따라 2.7 GHz에서1.3 GHz로 감소하였고, 정합두께는 8.7 mm에서 12.7 mm로 증가하는 경향이 나타났다. 모든 시편에서 최대반사감쇠량은 -40 dB 이상으로 Mn-Zn ferrite 폐기물을 전파흡수체로 활용이 가능하다.

• 한국자기학회지
• /
• 제4권3호
• /
• pp.208-213
• /
• 1994

복합 Ferrite 전파흡수체의 성능은 두께가 얇으며 대역폭이 넓을수록 우수하다. 본 연구에서는 복합 Ferrite 전파흡수체의 정합두께를 감소시키기 위하여 Ferrite-Iron-Rubber 복합체를 제조하고 그 특성을 고찰하였다. ${\alpha}-Fe$ 분말의 첨가에 의하여 복합체의 유전율 실수항과 투자율 실수항이 증가하여 정합주파수와 정합두께의 고하기 항인 $f_{m}.d_{m}$ 항이 감소하였고, 3~17 GHz의 주 파수 범위에서 Ferrite-Rubber 복합체에 비하여 정합두께가 0.5 mm~2 mm 정도 감소함을 확인할 수 있었다.

• 한국자기학회지
• /
• 제17권6호
• /
• pp.238-241
• /
• 2007

복합 전파흡수체로 사용할 Ni-Cu-Zn ferrite는 공침법을 사용하여 제조 하였고,제조 시편의 물리적 특성 및 전파흡수특성은 소결온도 변화에 따라 고찰하였다. Ni-Cu-Zn ferrite의 스피넬 구조는 XRD pattern을 통하며 확인하였다. 소결온도가 $1100^{\circ}C$에서 흡수 능력도 좋아짐을 알 수 있었으며, 소결된 페라이트의 초투자율은 평균 50 정도로 나타났다. $Ni_{0.7}Cu_{0.2}Zn_{0.1}Fe_2O_4$ 조성에서 소결 온도가 $1100^{\circ}C$ 일 때가 복합 전파흡수체로 사용할 조성임을 확인할 수 있었으며, 그 결과 복합 전파흡수체에서 사용할 수 있다고 사료된다.

• Journal of Magnetics
• /
• 제2권1호
• /
• pp.25-27
• /
• 1997

Ferrite tile absorber is of great concern for the application to anechoic chambers due to the growing demand of EMI or EMC measurements. This paper investigates the magnetic, dielectric and microwave absorbing properties of a Ni-An ferrite for the purpose. A design chart was constructed with the solutions of impedance-matching equation in the radio frequencies (30 MHz - 1 GHz). The material parameters for zero-reflection are predicted from the chart. The magnetic and dielectric properties of sintered Ni-Zn ferrite is found to be well suited for this requirements. A superior microwave absorbing properties (frequency band and absorber thickness) of the samples are demonstrated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1680-1682
• /
• 1999

In this study, three kinds of Mn-Zn ferrite/Ni-Zn ferrite/$Ni_2Y$ ferroxplana prepared by the coprecipitation method were compounded with the silicon rubber, and the ring-shaped specimens with various compositional ratio were made. The material constant of ferrite/rubber composite absorbers was obtained by the 2-port method. The material constants of the ferrite/rubber composite microwave absorber made of three kinds of ferrite with various compositional ratio were utilized in design the matching conditions (frequency and thickness) on the impedance matching map. We were able to predict the matching condition from the matching map. On all three kinds of ferrite/rubber composite microwave absorber with less than compositional ratio 60[wt.%] of ferroxplana, we have found that the reflection losses were over than 20[dB] at the S-Band $(2\sim4[GHz])$ and C-Band$(4\sim8[GHz])$.

• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1721-1727
• /
• 1989

Carbon-ferrite microwave absorbers were designed experimentally and fabricated trialy, as a result of which the relative frequency bandwith of 7.3 to 8.2% were obtained under the tolerance limits of the reflection coefficients lower than -20 dB, and the matching thickness becomes 1.4 to 1.6mm, which is significantly thinner than that of the conventional ones. Furthermore, attenuation has been founded by measuring the material constants of the microwave absorbers for microwave oven and the results are compared and discussed.

• Journal of Magnetics
• /
• 제3권2호
• /
• pp.64-67
• /
• 1998

Microwave absorbing properties of ferrite-epoxy composite (absorbing layer) attached on the carbon fiber polymer composite (reflective substrate) are analyzed on the basis of wave propagation theory. A modified equation for wave-impedance-matching at the front surface of absorbing layer including the effect of electrical properties of the quasi-conducting substrate is proposed. Based on this analysis, the frequency and layer dimension that produce zero-reflection can be estimated from the intrinsic material properties of the obsorbing layer and the substrate. It is demonstrated that the microwave reflectivity of carbon fiber composite has a strong influence on the microwave absorbance of front magnetic layer.

• 한국세라믹학회지
• /
• 제29권7호
• /
• pp.505-510
• /
• 1992

The influence of excess iron content (x) and reaction atmosphere on permittivity, permeability and microwave absorbing properties has been investigated in composite specimens embeded with (Ni0.4Zn0.6O)1-x(Fe2O3)1+x powders. A nitrogen atmosphere used for the reaction of the ferrite with excess iron composition (x>0) enhances spinel formation, and thereby increases both the magnetic and the dielectric loss of the ferrite composite. We also investigated the relation between the electromagnetic constants and the absorbing properites using impedance-matching solution maps for zero reflection. It is suggested that a superior microwave absorber can be fabricated through atmosphere and excess iron control during the powder process.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2270-2275
• /
• 2011

The sintering behavior and microwave properties of ferrite ($Ba_3Co_{2-2x}Zn_{2x}Fe_{24}O_{41}$ ceramics) were investigated for microwave applications. Also PIFA type antenna with ferrite was simulated. All samples were prepared by the solid state reaction method and sintered at $1350^{\circ}C$. All ceramics had relatively density above of 92% compare with theoretical density of $Ba_3Co_2Fe_{24}O_{41}$ ceramics. From the XRD pattens, the Z-type phase was existed as main phase in $Ba_3Co_{2-2x}Zn_{2x}Fe_{24}O_{41}$ ceramics. The permittivity and permeability of $Ba_3Co_{2-2x}Zn_{2x}Fe_{24}O_{41}$ ceramics were increased with Zn additions and decreased rapidly over frequency of 200~600 MHz. Several PIFA type antennas with ferrite and FR4 were simulated. All antenna structure had return loss of less than -10 dB at each resonant frequency. Simulated antenna using both ferrite and FR4 showed size reduction of 25% without a significant decrement of efficiency.

• 한국세라믹학회지
• /
• 제29권3호
• /
• pp.177-182
• /
• 1992

The effect of heat-treatment temperature on the microwave absorbing properties was investigated in Ni0.8Zn0.2Fe2O4 specimens. The composite specimens were prepared by modling and curing the mixture of prereacted ferrite powder and silicone rubber. The measurement of complex permeability and permittivity was made by the reflection/transmission method. The most sensitive material constants with heat-treatment temperature is the imaginary (loss) component of permeability. The higher the heat-treatment temperature, the greater the magnetic loss. The composite specimens with high magnetic loss exhibited superior microwave absorbing properties. The quantitative estimation of microwave absorbing properties were made by plotting the observed material constants on the calculated solution map of impedance-matching.