• 분석과학
• /
• 제5권3호
• /
• pp.263-268
• /
• 1992

원통형 microwave cavity를 이용한 플라즈마 발생장치를 기체크로마토그라프에 연결하여 원자발광 검출기로 사용하였다. 이 장치를 이용하여 몇 가지 원소에 대한 검출한계를 결정하였다. 브롬과 황에 대한 검출한계는 각각 0.46 pg/s 와 0.51 ng/s였으며, 운반기체의 유량이 10~20 mL/min에서 안정한 플라즈마를 얻을 수 있었다.

• 보존과학회지
• /
• 제26권1호
• /
• pp.77-83
• /
• 2010

국내에 서식하는 지중흰개미는 목재 내부에 공동화 현상이 발생되어 붕괴가 일어나기 직전까지도 외관상 특별한 변화가 발견되지 않는다. 이러한 흰개미의 활성을 비파괴적으로 측정하는 기술은 현재 국내에 적용된 사례가 없었다. 따라서 본 연구는 극초단파 탐지 장비(Termatrac, Australia)를 이용하여 목조 문화재의 비파괴 진단 기술을 정립하고자 한다. 연구 결과, 소나무의 경우 16cm(민감도 5, 6), 느티나무와 Douglas fir의 경우 17cm(민감도 5, 6)까지 측정이 가능하여 국내 대부분의 목조 건축물에 적용이 가능할 것으로 판단되었다. 현장조사 결과 전국 목조건축물 231동 중 33.8%가 흰개미에 의한 손상을 입었으며, 7.8%인 총 18개 건물에서 흰개미 가해가 진행 중인 것을 확인할 수 있었다. 이와 같은 결과를 통해 목조 문화재의 비파괴 분석법으로서 적용이 가능할 것이라 예상된다.

• 전기학회논문지P
• /
• 제57권3호
• /
• pp.270-274
• /
• 2008

The microwave sensor in which the sensitivity was excellent and a structure is simple was developed and it manufactured. And the sensing range that uses the developed product was confirmed. When the developed microwave sensor was set up in the ceiling of a building, we confirmed that the amplitude of the sensitive area increased as the tilting angle was enlarged. The sensitive area became a greatest in case the tilting angle was 65 degree. According to the height of a ceiling, because the sensing range is determined, in case of using in the building in which the height of a ceiling is enough secured it is determined to secure the more wide sensitive area. Moreover, the configuration of the circuit having the simple structure makes the miniaturization of a product, and the light weight possible. It is considered to have the price competitive power which it reduces the manufacturing cost, is sufficient.

• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.199-205
• /
• 2010

This paper presents a tumor detection system for breast cancer that utilizes two-dimensional (2D) image reconstruction with microwave tomographic imaging. The breast cancer detection system under development consists of 16 transmit/receive antennas, and the microwave tomography system operates at 900 MHz. To solve a 2D inverse scattering problem, the method of moments (MoM) is employed for forward problem solving, and the simplex method employed as an optimization algorithm. The results of the reconstructed image show that the method accurately shows the position of a breast tumor.

• 한국컴퓨터정보학회논문지
• /
• 제20권7호
• /
• pp.57-64
• /
• 2015

In this paper, we propose a design of microwave motion detector using X-band doppler radar sensor to minimize the power consumption. To minimize the power consumption and implement battery operated system, pulse input with 2 KHz, 4% duty cycle is exerted on the doppler radar sensor. In order to simplify the process of working with ATmega2560 microcontroller unit, Arduino compatible board is designed and implemented. Arduino is open source hardware and many library software is published as open source tools. Smartphone app is also proposed and designed as a real-time user interface of the motion detector. The SQLite database on the Android mobile operating system is used for recording raw data of motion detection for post-processing job, such as fast Fourier transform (FFT). Bluetooth interface module is implemented on the motion detection board as a wireless communication interface to the smartphone. The speed of human movement is identified by post-processing FFT.

• 전기의세계
• /
• 제22권1호
• /
• pp.35-41
• /
• 1973

An automatic point traffic control method is recommended for more idealistic traffic flow over coarse road netowrks. The automatic control apparatus recommended, consists of a transceiver, amplifier, digital-to-analog converter, signal light controller for emergency and steady state, and digital counter as monitor. The transmitter sends a signal to the target vy means of Microwave-FM-CW and a diode detector picks up the echo signal. Thus the operation of the entire system will be carried out through an open loop state. Some factors necessary for an ideal detector system are rapid response, longevity and stability. An analytical method of the Doppler effect substitutes the conventional frequency deviation into the amplitude of detector output. The changing rate of amplitude is proportional to the voltage of the detector output. Some induced formula from Maxwell's radiation field theory ensures this new method, and, new method, and proves the fact with an experimental data presentation. Stability depends upon Klystron as an oscillator and a diode as a detector. the transceiver installation affects on the response and sensitivity of the system. In accordance with the detector output, several targets are easily classified by amplitudes on the scope. The traffic flow, i.e., target movement which is analyzed by the amplitude method, is shown through the scope and indicates it on the digital counter. The best efficiency for the amplitude analysis can be attained through use of an antenna having the highest sensitivity.

• Journal of Biosystems Engineering
• /
• 제24권3호
• /
• pp.235-242
• /
• 1999

This study was conducted to develop a grain moisture meter using microwave free space transmission technique at X-band frequency. The 10.5GHz microwave oscillator using a dielectric resonator was designed and fabricated to transmit electromagnetic wave through standard horn antenna to a sample holder with the wetted Hwasung and Chuchung rough rice(12.00∼26.25%). To detect the output voltage of transmitted wave from receiving horn antenna, the detector was composed of shottkey diode and RF impedance matching circuit. The regression model for measurement of grain moisture content was developed. Its correlation coefficient and standard error of prediction (SEP) were found to be 0.9882 and 0.657 respectively between measure and predicted moisture contents.

• Bulletin of the Korean Chemical Society
• /
• 제13권4호
• /
• pp.349-351
• /
• 1992

• 대한전자공학회논문지
• /
• 제26권12호
• /
• pp.2025-2031
• /
• 1989

In this paper, using optical effect of characteristics of GaAs compound, two potential application of optical controlled GaAs MESFET are demonstrated` detector, microwave amplifier gain control. These lead to the possibility of the interaction with optical devices. The preliminary experiments show the light induced voltage, the increase in the drain currnet and the change in the microwave scattering parameters of GaAs MESFET under optical illumination(He-Ne laser). And imcrowave amplifier gain is round to be varied with changing in intensity of optical illumination.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권6호
• /
• pp.306-309
• /
• 2004

This paper presents a new active antenna consisting of a microstrip patch for the passive radiator, a mixer for frequency conversion, a voltage controlled oscillator (VCO) and a phase detector for phase control. The microwave signal frequency has been converted into intermediate frequency (IF) on the antenna elements by the mixer. The active antenna consists of two ports, the IF port has a transmitted IF signal via power combined to the baseband and the dc control port is under the control of the phase-detector. The input voltage of the VCO is controlled by the phase detector. The scan range of the array is determined by the phase detector and the VCO and is obtained between 30$^{\circ}$ and - 30$^{\circ}$