• Journal of Conservation Science
• /
• v.9 no.1
• /
• pp.48-52
• /
• 2000

A hundred wooden foundation piles were found underground during reconstruction for Heungreamun after removing ex-Chosunchongdokbu (ex-Government General of Chosun) building, which was built in 1916, at Kyungbok Palace in Seoul. It is known that larch piles had been collected from the Yaru area near Mt. Baekdu (Changbai). in North Korea. We examined 15 piles for identification of the species and their tree-ring structure. The species is identified as Larix gmelini by microscopic observation. Average diameter of the piles was 27 cm and average age 103 years. We obtained 151 year tree-ring chronology. However, we could not date the exact cutting years because there was no reference chronology yet. When we can obtain chronologies from living trees near the Yaru area, we could make a absolute and longer chronology for studying past history and environments around Mt. Baekdu.

• Journal of Korean society of Dental Hygiene
• /
• v.16 no.4
• /
• pp.635-641
• /
• 2016

Objectives: The purpose of this study is to assess the characteristics of tooth surface after using Gracy curet and Ultrasonic scaler Methods: In this study, 12 teeth extracted were used. 12 specimens were divided into three groups with the same numbers, which were classified into Control group, Gracy curet use group, and Ultrasonic scaler use group, and after performing instrument operation, we measured the roughness and the loss degree of tooth surface by using SEM. Results: In groups using Gracy curet and Ultrasonic scaler, the roughness and the loss of tooth surface increased significantly(p<0.05). In the roughness of groups using Gracy curet and Ultrasonic scaler, Ultrasonic scaler group was higher in crown, but Gracy curet group was higher in root. As a result of observation through SEM, the roughness and the loss degree increased in order of Control group, Ultrasonic scaler use group, and Gracy curet use group. Conclusions: Taken together above results, both hand instrument and ultrasound equipment create roughness and loss in crown and in root, and hand instruments makes rougher than ultrasonic instruments in root, so it is thought to require thorough and accurate technical application not to damage tooth surface when removing plaque.

• Clinical and Experimental Reproductive Medicine
• /
• v.23 no.1
• /
• pp.61-66
• /
• 1996

Vasectomy has become a popular method for male sterilization and this, in tum, has been followed by an increase in the number of patients requiring vasectomy reversal. Recently, many authors have reported a high success rate of vasovasostomy using microsurgical techniques. However, a significant discrepancy exist between the anatomical patency rate and pregnancy rate despite improvements in surgical techniques. Number of 420 patients who underwent vasovasostomy by a modified one layer reanastomosis from January 1986 to December 1994 were reviewed. Of the total, Complete follow up were possible in 115 patients. Of the 115 patients, 74 patients were treated by macroscopic reanastomosis, and microscopic technique were applied in 41 patients. Duration of vasal obstruction, gross apperance of vasal fluid, operative method, presence or absence of sperm and sperm granuloma, and results of postoperative semen analysis were analyzed as factors influencing the pregnancy rate. Success rates for patency and for pregnancy were 81% and, 42% respectively. Rate of pregnancy were increased if there were shorter periods of obstruction(<10years), bilateral observation of watery vasal fluid, presence of sperm bilaterally, bilateral presence of sperm granuloma at the vasectomy site, and normal results on postoperative semenalysis. With these results, we can conclude that all factors mentioned may affect the success rate of pregnancy following vasovasostomy.

• Journal of Periodontal and Implant Science
• /
• v.37 no.3
• /
• pp.599-611
• /
• 2007

The present study was performed to evaluate the surface roughness and effect of Tetracycline-HCI on the change of implant surface microstructure according to application time. Ti$O_2$ surface Implant was utilized. Implant surface was rubbed with 50mg/ml Tetracycline-HCI solution for 0.5min, 1min, 1.5min, 2min, 2.5min and 3min respectively in the Tetracycline-HCI group. Then, specimens were measured surface roughness and processed for scanning electron microscopic observation. The results of this study were as follows. 1. Ti$O_2$ blast implant surface showed increased surface roughness 1.5 minute after treatment with Tetracycline-HCI. But, there were not significant differences in saline group after treatment. 2. Tetracycline-HCI group showed changed surface micro-morphology in SEM after 1.5 minute. There were not significant differences in saline group after treatment. 3. Between Tetracycline-HCI group and saline group, there were difference in surface roughness change and SEM micro-morphology. Tetracycline-HCI have influence on Ti$O_2$ blast implant surface. In conclusion, the detoxification with 50mg/ml Tetracycline-HCI must be applied respectively with different time according to various implant surfaces.

• Journal of Periodontal and Implant Science
• /
• v.37 no.3
• /
• pp.585-597
• /
• 2007

The present study was performed to evaluate the effect of Tetracycline-HCI and Saline on the change of implant surface microstructure and surface roughness according to application time. Implants with resorbable blasting media surface were utilized. Before test all 13 implants were measured surface roughness. Among them, 6 implants were rubbed with 50mg/ml Tetracycline-HCl solution and other 6 implants with saline for $\frac{1}{2}$min., 1min., $1\frac{1}{2}$min., 2min., $2\frac{1}{2}$min and 3min. Then, specimens were processed for scanning electron microscopic observation and surface roughness after test. The results of this study were as follows. 1. Control group showed a few irregular, rough, uneven surface with crater-like depression. 2. The test group with Tetracycline-HCl conditioning showed an altered surface when Tetracycline-HCl was applied for 30secs, and showed a various surface alteration as application times go on. 3. The test group with Saline conditioning showed no significant surface differences and surface roughness. 4. The significant increase of Ra value was showed when Tetracycline-HCl was applied for 30secs. In conclusion, the 50mg/ml Tetracycline-HCl must not be applied for the RBM surface implant for surface treatment.

• Journal of Periodontal and Implant Science
• /
• v.37 no.3
• /
• pp.575-584
• /
• 2007

The present study was performed to evaluate the effect of citric acid on the change of implant surface microstructure according to application time. Implants with pure titanium machined surface, and HA coated surface were utilized. Pure titanium machined surface and HA coated surface were rubbed with pH 1 citric acid for 30s., 45s., 60s., 90s., and 120s. respectively. Then, the specimens were processed for scanning electron microscopic observation. The following results were obtained. 1. The specimens showed a few shallow grooves and ridges in pure titanium machined surface implants. The roughness of surfaces conditioned with pH 1 citric acid was slightly increased. 2. In HA-coated surfaces, round particles were deposited irregularly. The specimens were not significant differences within 45s. But, began to be changed from 60s. The roughness of surfaces was lessened and the surface dissolution was increased relative to the application time. In conclusion, pure titanium machined surface implants and HA coated surface implants can be treated with pH 1 citric acid for peri-implantitis treatment if the detoxification of these surfaces could be evaluated.

• Korean Journal of Plant Resources
• /
• v.14 no.2
• /
• pp.102-107
• /
• 2001

This study was carried out to explore for the possibility of recycling the pine wood sawdusts for the substrate for enokitake (Flammulina velutipes) cultivation. The wood species of sawdusts cultivated for enokitake mushroom were identified mostly as hard pine (Pinus spp.). Distribution of enokitake hyphae was restricted to ray parenchymas and tracheids exposed to fungi. Nevertheless, degree of cell wall degradation by enokitake was slight. Light microscopic observation showed the thinning of secondary cell wall in some tracheids. Under polarized microscopy the 1()ss of birefringence was observed only in a few latewood tracheids. All the middle lamella remained intact. The present work showed clearly that pine sawdusts used as substrate for enokitake cultivation held enough cell wall materials for mushroom cultivation. The relative resistance of softwood cell walls against enokitake fungus was also discussed.

• Particle and aerosol research
• /
• v.13 no.3
• /
• pp.133-139
• /
• 2017

In this paper, we proposed an emulsification method without using an emulsifier and investigated the effects of particle size distribution in fluids on dispersion stability. Surfactant-free oil in water emulsion was prepared with 1 % (w/w) of olive oil by using high speed agitation, high pressure and ultrasonic dispersion methods. The particle size, microscopic observation, and dispersion stability of each sample were evaluated and dispersion stability according to various dispersion methods was compared. As a result, the emulsion dispersed by the ultrasonic dispersion method showed the smallest particle size and uniform distribution of $0.07{\sim} 0.3{\mu}m$ and was the most stable in a 7 days stability evaluation. In the above experiment, four olive oil emulsions having different particle sizes were prepared using ultrasonic dispersion technology that was capable of producing stable emulsions. The dispersion stability of each samples with oil droplet sizes of (A) 0.1 to $0.5{\mu}m$, (B) 0.3 to $4{\mu}m$, (C) 1 to $10.5{\mu}m$ and (D) 2 to $120{\mu}m$, was observed for 7 days, and the relationship between the stability and performance was studied. Emulsion (A) with particle size less than $0.5{\mu}m$ displayed the dispersion stability showing below 5 % change in a 7 days stability evaluation. In the case of (B), (C), and (D) that had larger particle than $0.5{\mu}m$, the changes of dispersion stability were 10 %, 13 % and 35 % respectively. From these results, it was proved that dispersion stability of emulsion with uniform particle size of $0.5{\mu}m$ or less was confirmed to be very stable.

• Culinary science and hospitality research
• /
• v.18 no.2
• /
• pp.162-171
• /
• 2012

This study was conducted to investigate the changes of macerating properties from grape suspensions for which both were treated with protopectinase(PPase) and mechanical maceration stored at $4^{\circ}C$ for 28 days. Changes of macerating properties such as pH, total acidity, color, total polyphenol and antioxidant activity of suspensions after enzymatic hydrolysis were determined before and after heating, and microscopic observation made on suspensions containing single cells. With the PPase, grapes were enzymatically macerated to separate cells to primary cell wall without damage. Also, the changes of macerating properties in grape suspension treated with PPase and after heat treatment at $80^{\circ}C$ for 30 min were more stable than those of mechanical maceration, indicating the thermal stability. Thus, the PPase treatment for grapes could be a better choice for preparing highly valuable and functional processed food as well as for prolonging preservation periods.

• Korean Journal of Environmental Biology
• /
• v.27 no.4
• /
• pp.384-390
• /
• 2009

An antifungal antibiotic-producing bacterium was isolated from soil and identified as Bacillus sp. CJ-1. The culture supernatant was found to have a strong and stable antifungal activity against Colletotrichum gloeosporioides. Culture conditions for the maximum antifungal activity were examined. Glucose and yeast extract were selected as the best carbon and nitrogen sources. The optimum C/N ratio was 3. The optimum temperature and initial pH were determined as $35^{\circ}C$ and 6.0, respectively. Under these conditions, the production for the antibiotic was maximized at 72 hr at $35^{\circ}C$ after cultivation. Microscopic observation showed that the culture supernatant of Bacillus sp. CJ-1 had a strong inhibitory activity on the mycelial growth of the test strain at above $12.5\;{\mu}L\;mL^{-1}$ of concentration.