• 한국세라믹학회지
• /
• 제23권2호
• /
• pp.64-70
• /
• 1986

In this investigation x-ray diffraction method was mainly studied for quantitative analysis of clinker mineral composition. And also optical microscopic observation and Bogue calculation method were applied to compare with the x-ray diffraction method. In the procedure of x-ray diffraction analysis graphite monochromator automatic divergence slit and spinner for sample holder were used for minimizing the error due to the operation of the equipment. Especially the separation of overlapped peaks were proceeded by micro-processor automatically. The results of x-ray diffraction method for synthesized clinker were consistent with the Bogue value and the results of optical microscopic observation. However the results of quantitative analysis of mineral composition or commercial clinker containing solid solution of minor component were different from the Bogue value. On the other hand they agreed reasonably well with results of the optical mic-roscopic observation.

• 한국공작기계학회논문집
• /
• 제10권6호
• /
• pp.42-47
• /
• 2001

In this study, fatigue limit of ductile cast iron is evaluated based on phenomena of the microscopic observation, such as matrix structure, spheroidal ratio, size of graphite and distribution. Three different ferrite-pearlite matrix structure, GCD 45-), GCD 50, GCD 60 series, all of which contain more than 70% spheroidal ratio of graphite, were used to obtain the correlation between maximum size of graphite and fatigue strength. It was concluded as fellows. (1) In Ductile cast iron of ferrite-pearlite matrix, the fatigue limit of GCD 60 series with 73% pearlite structure was the highest. (2) From observation of the starting point of crack of all specimens, it is noted that the crack initiates, in graphite, goes through ferrite and propagates into pearlite. (3) A good quality of Ductile cast iron used in this experiment can be checked from uniformly distributed graphite. The negligible interaction effect between graphites was verified by microscopic observation and fracture mechanics investigation in surface and interior of the specimen.

• Composites Research
• /
• 제16권4호
• /
• pp.29-35
• /
• 2003

본 논문에서는 직물 복합재료의 제조된 드레이핑 헬맷의 등가 토우 두께, 종방향 토우의 진폭, 토우 간격 등의 여러 가지 토우 파라메터들을 관찰하고, 현미경 관찰을 통해 직물 복합재료 구조의 각 방향에 따른 미세 변형을 서로 비교하였다. 또한 이러한 관찰 결과들을 동일한 토우 구조를 가지는 견직물 시편을 이용한 일방향 편향 인장실험, 이축 인장실험 결과와 비교하였으며, 오토클레이브에서 경화된 여러 가지 선형 조건을 가진 시편들과도 비교하였다. 직물 복합재료(새틴 직물 복합재료)로 제작된 드레이핑 힐멧으로부터 현미경 관찰 시편을 얻었으며, 각 시편의 종방향과 횡방향에 대해 각각 관찰하였다 관찰 결과로 부터, 토우 방향에 따른 서로 다른 변형 패턴을 확인할 수 있었으며 드레이핑 공정 중 금형의 기하학적 조건이 직물 복합재료의 변형에 미치는 영향을 확인하였다.

• 한국표면공학회지
• /
• 제37권3호
• /
• pp.137-145
• /
• 2004

This study surveys the microscopic wear of CVD TiN coatings in repeated sliding, using the SEM Tribosystem as in-situ system. According to the research, the depth of wear groove and the specific wear amount are changed by the transition of the microscopic wear mode. This investigation leads to the fact that the change of wear characteristics produces the transition of the wear mode. In this survey, four modes are observed for CVD TiN coatings with the thickness of 1.6$\mu\textrm{m}$: ploughing, powder formation, flake formation and coating delimitation. The microscopic wear properties is quantitatively evaluated in terms with the microscopic wear mode and the specific wear amount. These relationships prove that the observation of wear modes with a SEM Tribosystem is useful to evaluate wear properties.

• Applied Microscopy
• /
• 제28권4호
• /
• pp.477-490
• /
• 1998

Most spiders have four pairs of simple eyes. A few families of the spider have their developed eyes to an extent visual cues make up a significant of information to response from the external stimuli. Most spiders respond to the external stimuli around them. Specially, they are very sensitive to vibrations from the air, the ground, their webs, or even the surface of water. The present study was undertaken to examine the evolutionary development and function of eye with the observation of visual ultrastructure of Atypus coreanus Kim, 1985 using the electron microscopy. They have weak mobility, limited territory and low developed eyes. Atypus coreanus was collected from Mt. Ungil, Namyangju-gun, Kyonggi province. The fine structure of these eyes was examined by electron microscopy, and prepard by teasing method for scanning electron microscopic observation. As a result, the eyes of Atypus coreanus was composed of cornea, lens, vitreous body, retina, and rhabdome.

• Ocean and Polar Research
• /
• 제32권3호
• /
• pp.247-254
• /
• 2010

Single cell PCR analysis and light and scanning electron microscopic techniques were utilized to identify free living bivalve larvae in the coastal waters of Tae-an, on the west coast of Korea. Through DNA sequencing, venerid clam larvae were isolated and identified as Ruditapes philippinarum (99% similarity) and Meretrix lusoria (99%). Under microscopic observation, the D-veliger stage of R. philippinarum exhibited symmetrical shoulder angles and an elliptical ventral form. In contrast, M. lusoria displayed asymmetrical shoulder angles and a round ventral form in the umbonal stage. Size of the R. philippinarum larvae was $156{\pm}22{\mu}m$ in length, $126{\pm}12{\mu}m$ in height, $92{\pm}14{\mu}m$ in width with a length: height ratio of 1.23. Meretrix lusoria was $202{\pm}44{\mu}m$ in length, $161{\pm}35{\mu}m$ in height, $96{\pm}38{\mu}m$ in width with a length: height ratio of 1.25. Experimental results indicate that morphological and molecular characteristics provide evidence for the larval identification of these two venerid clam larvae species in nature.

• 한국기계가공학회지
• /
• 제10권3호
• /
• pp.100-107
• /
• 2011

To evaluate the wear characteristics of very thin ceramic coated layer, it is very important to investigate its wear process in great detail. An effective method for investigating the wear of a thin layer is the observation of wear process in microscopic detail, using in-situ system. In this study, based on the SEM Tribosystem as in-situ system, the microscopic wear mode of TiN coatings was investigated in repeated sliding. Consequently, four modes were revealed for TiN coatings: Ploughing, powder formation, flake formation and coating delimitation. Sc(Severity of contact) can clarify transition condition of those microscopic wear modes.

• 대한본초학회지
• /
• 제22권2호
• /
• pp.121-126
• /
• 2007

Objectives : A morphological classification among Adenophora triphylla var. japonica, Codonopsis lanceolata, Adenophora remotiflora and Codonopsis pilosula was made through microscopic observation. Method : The slice of the tested material made by paraffin section technique was colored with Safranine Malachite Green contrast methods, and then observed and photographed by olymphus-BHT. Result : 1. Codonopsis pilosula is like a long cone, with amole-like projected parts at the beginning of the roots. 2. Adenophora triphylla var. japonica, Codonopsis lanceolata, Adenophora remotiflora, and Codonopsis pilosula are all similar as following: 1) Cork layers are composed of a few to over 10 subsidiary cells, with individual or a group of stone cells among them. 2) Phloem is wide and has a milk tube. Conclusion : Adenophora triphylla var. japonica, Codonopsis lanceolata, Adenophora remotiflora, and Codonopsis pilosula are all similar and difficult to be distinguished through microscopic observation, so that chemical experiments should be conducted for their identification.

• 한국환경보건학회지
• /
• 제30권2호
• /
• pp.108-114
• /
• 2004

Observation of microorganisms collected from contaminated soils has been mainly conducted by using microscopy. Microscopic measurement is occupied an important part of the microorganism experiment, and is used as an important tool to count microorganisms as well as to observe cellular form and mode of life in the field of soil microbe observation. In general, observation equipments for soil microbes consist of electron microscope, camera, frame grabber (image acquisition baud), and image analysis software. Because image analysis software should be linked with frame grabber most equipments have to be imported as the package form. Therefore, the observation system is very expensive and difficult to be operated. In this study, soil microbes＇ observation equipment with the vision system which is easy operated and cheaper than imported one was developed and tested. The efficiency of image capturing and data aquisition with developed frame grabber and software in this experiment was good enough to analyze the image of soil microorganism.

• Toxicological Research
• /
• 제6권1호
• /
• pp.1-12
• /
• 1990

Effect of red ginseng treatment on experimentally induced hyperkeratosis was investigated by light microscopic observation scanning electron microxcope (SEM) examination, epidermal enzyme activities nd lipid contents. Both light microscopic observation and SEM examination showed that hexadecane induced epidermal hyperplasia, hypertrophy and hyperkeratosis by increasing the numbers as well as the sizes of epidermal cells including desquamating horny cells. The superficial horny cells were protruded around the base of hair shaft. Among red ginseng components, only saponin treatment inhibited epidermal hyperplasia and hyperkeratosis by reducing the thickness of epidermis and arranging the cornified cells. Saponin from korean red ginseng inhibited abnormally increased epidermal LDH, ICD and G6PDH activities and reduced the contents of epidermal lipids induced by hexadecane. It seems that red ginseng saponin has preventive effect on experimental hyperkeratosis possibly by controlling the enzyme activities involved in epidermal cellular metabolism, resulting in reduced amounts of abnormal epidermal lipids.