• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.893-894
• /
• 2006

DSP based on a 8 bit microprocessor was studied for ECG and PPG signals. Digital filtering has an advantage of reducing hardware components in system-on-chip design. However, low resolution such as in 8 bit data has much difficulties in DSP. We demonstrated a comparable performance of DSP filtering compared with analog filters.

• Journal of Industrial Technology
• /
• v.23 no.A
• /
• pp.55-61
• /
• 2003

In this study, a signal processing and related techniques for development of a weight measuring system using a digital loadcell which is able to satisfy the important properties of WIM (weighing-in-motion) system have been investigated. A fast and high accurate signal processing of the digital load cell sensor for weighing-in-motion system is presented. A/D conversion system is constructed to realize a stable A/D conversion and signal processing algorithm using DSP and microprocessor. A new technique for vibration and measuring speed of the system is also investigated. The proposed method was applied to the actual design and the experimental results showed good performance of the weighing speed and stability.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.149-149
• /
• 1999

This paper is to present a selected method of circuit parameters in the inverter part of the electronic dimming ballast for fluorescent lamps, that is adequate to use with the prevailing dimming controller IC. Through the experiment result using the prototype of the electronic dimming ballast produced by this method, its validity is verified from the electrical and light output characteristics on fluorescent lamps. Also, it is feasible to remote automatic and passive control fur dimming electronic ballast as using a microprocessor, and we easily recognize the lamp condition owing to make a program indicate abnormal behavior for fluorescent lamp at PC screen.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.59-60
• /
• 2013

In this paper, we implemented a digital doorlock using microprocessor Atemega128 made in Atmel. We added RFID reader to identify different existing Doorlock. To operate the system, first, if RFID reader recognize card, LCD is used to operate password input message. Second, if password is correct, door is opened. But if password is incorrect, door will not be open. To extend security intensity for opening door key, we used RFID module and can operate it easily.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.3
• /
• pp.143-152
• /
• 2002

Frequency is regarded as one of most important indices for the operating power systems. Several digital techniques for measuring frequency have been presented in the last decades. This paper proposes a design and implementation an adaptive scheme using phase angle difference calculation fort frequency measuring in power system. The advantages of the proposed technique are demonstrated by fault signals from EMTP simulation and user defined arbitrary signals by Excel program. The proposed technique is compared with the conventional methods. Performance teat results indicate that the proposed technique provides accurate measures in pretence of noise and harmonics and in case faults and is suitable for measurement near-nominal, nominal. and off-nominal frequencies. We can see that It will be useful in microprocessor based relays and digital metiers that need to measure power system frequency.

• Solar Energy
• /
• v.20 no.3
• /
• pp.85-95
• /
• 2000

As the industry has been growing rapidly, the problem of environmental pollution has been on the rise seriously. In this paper, we used solar cells at the power supply unit of the equipment, which has been sold at present, for measuring the quality of water in order to complement the problem. Also, to get rid of the inconvenience that the examiners must go the job site, check and collect the polluted water we set the goal at designing the water pollution alarm system which measures the quality of water automatically using one-chip microprocessor and materializing the program.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.427-430
• /
• 2002

This paper has been studied a new geoelectric survey and instrunmentation using Low Frequency Electric Field .sensing Antenna. “Low Frequency Electric Field Sensing” is a technology in new method of survey to use array type antenna, the power of operation in antenna is using AC or DC pulse instead of DC current. The architecture of system embodied transceiver system using a microprocessor(PIC) of Microcllip Technology Inc. An array antenna design and il control transmission of antenna to use CDMA in this system. It is using array type antenna for the earth、earth's crust to survey explain from theory and experience.

• 유체기계공업학회:학술대회논문집
• /
• 1999.12a
• /
• pp.118-122
• /
• 1999

Thermal mass flow meter was developed using principle of convective heat transfer. The advantage of thermal mass flow meter is measuring mass flow directly, therefore, it is not required to use densitometer or temperature/pressure and DP gages. The final accuracy of this thermal mass flow meter is $\pm1.0{\%}$ or better, reproducibility is $\pm0.2{\%}$, and the response time is 600 ms. The thermal mass flow meter was developed from a single point to multi-points (maximum is 9 points), and the number of points is determined according to desired accuracy and size of piping/duct. Since this thermal mass flow meter adopted microprocessor based design, it is intrinsically accurate, self-error detectable, and has self-diagnosis function. The applications of this thermal mass flow meter are for measurement and control of HVAC air flow, other gas flow, and liquid flow.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.5
• /
• pp.474-482
• /
• 1992

This paper describes the speed control system of an induction type ac servomotor drive on the vector control basis of slip frequency and constant secondary flux control for a quick torque response. The system is composed of a digital controller using a SCB-V50 microprocessor and a PWM inverter with power MOSFETs for high speed switching. And, for the measurement of actual instantaneous currents, MDCS A070-051 hall sensors are employed. The rising time of step responce by this system through the test of a 600[W] ac servomotor is 30[ms]. Overall experimental result shows that the drive performance of the system is similar to that of a separately excited armature current control of a dc motior.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.6
• /
• pp.372-375
• /
• 2005

The tracking performance of optical disk drive(ODD) system can be improved using disturbance observer(DOB). But, DOB was not easily applied in the ODD system because the additional microprocessor was needed. In this paper, we propose an error-based modified disturbance observer(EM-DOB) for ODD system. Due to the simplified structure of EM-DOB, the system is easily implemented to the digital control algorithm or the analog circuit. In these algorithms, disturbances rejection performance of system can be tuned as Q filter parameters are selected. Based on analysis of sensitivity function, three guidelines of Q filter design are suggested. Experimental results of DOB and EM-DOB are evaluated under the forced disturbances.