• 한국세라믹학회지
• /
• 제25권3호
• /
• pp.201-206
• /
• 1988

Mo 입자의 첨가가 Al_2O_3$ 세라믹스의 미세구조와 기계적 성질에 미치는 영향을 알아보기 위하여 평균입경이 2-micron인 Mo와 6-micron인 Mo를 Al_2O_3$에 각 분산시켜 1$600^{\circ}C$, $H_2$ 분위기에서 5시간 소결하였다. Mo는 Al_2O_3$의 입자성장을 억제시켰으며 Mo의 입자가 작을 때 그 효과는 크게 나타났다. 2-micron Mo를 분산한 경우 꺽임강도와 파괴인성은 크게 증가하여하였으며, 6-micron Mo를 분산한 경우 강도는 증가하지 않았으나 파괴인성은 다소 증가하였다. Al_2O_3$-Mo계의 인성증진기구는 균열편향에 의한 파단면의 증가와 미세균열에 의한 균열전파에너지의 분산에 의한 것으로 보인다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.39-42
• /
• 2006

In this study, there is purpose that is on a concrete defect happen from aggregate minute's particle mixing in process that make waste concrete as recyclable cement puts to practical use constructing basic data for design of mix proportion used recyclable cement and solves strength fall problem using micron separator, and does general recyclable cement high quality. As a result of X-ray diffraction(XRD) of rater HR-C than NR-C is aware that it come out the micron-separating to decrease the $SiO_2$-peak below 50%. And a construction field which apply for strength's $24{\sim}28MPa$ HR-C in order to realize NR-C of 44% and 51%. Recycle concrete capacity through improved recycle cement of manufacturing technique by micron-separating's new distribution more better improvement. Therefore, in this study, it need to more various study a recycle cement of high quality for reasonable and utility recycling than disposal concrete.

• Korean Chemical Engineering Research
• /
• 제45권3호
• /
• pp.264-268
• /
• 2007

마이크론 금속섬유 필터 표면상에 탄소나노튜브를 직접 합성 성장함으로써 마이크론 필터의 성능을 향상할 수 있었다. 탄소나노튜브는 합성조건에 따라 마이크론 섬유 주위를 덮는 덤불 나노구조체 또는 섬유 사이를 연결하는 망 형상의 나노구조체로 성장하였다. 탄소나노튜브가 성장한 금속필터와 탄소나노튜브가 성장하지 않은 금속필터의 여과성능을 측정하여 비교한 결과, 차압의 변화는 미미하나 여과효율은 더욱 향상되었고, 이는 탄소나노튜브가 오염 나노입자를 잡는 트랩으로 작용하였기 때문이다.

• 한국세라믹학회지
• /
• 제48권6호
• /
• pp.487-492
• /
• 2011

The effect of the application of lanthanum strontrium manganite and yttria-stabilized zirconia (LSM-YSZ) nano-composite fabricated by pulsed laser deposition (PLD) as a cathode of solid oxide fuel cell (SOFC) is studied. A gradient-structure thin-film cathode composed of 1 micron-thick LSM-YSZ deposited at an ambient pressure ($P_{amb}$) of 200 mTorr; 2 micron-thick LSM-YSZ deposited at a $P_{amb}$ of 300 mTorr; and 2 micron-thick lanthanum strontium cobaltite (LSC) current collecting layer was fabricated on an anode-supported SOFC with an ~8 micron-thick YSZ electrolyte. In comparison with a 1 micron-thick nano-structure single-phase LSM cathode fabricated by PLD, it was obviously effective to increase triple phase boundaries (TPB) over the whole thickness of the cathode layer by employing the composite and increasing the physical thickness of the cathode. Both polarization and ohmic resistances of the cell were significantly reduced and the power output of the cell was improved by a factor of 1.6.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권3호
• /
• pp.45-50
• /
• 2021

In this study, the effect of the size of B powder on the critical current density (J_c) of MgB₂ prepared by an in situ reaction process was investigated. Various combinations of B powders were made using a micron B, ball-milled B and nano B powders. Micron B powder was reduced by ball milling and the milled B powder was mixed with the micron B or nano B powder. The mixing ratios of the milled B and micron or nano B were 100:0, 50:50 and 0:100. Non-milled micron B powder was also mixed with nano powder in the same ratios. Pellets of (2B+Mg) prepared with various B mixing ratios were heat-treated to form MgB₂. T_c of MgB₂ decreased slightly when the milled B was used, whereas the J_c of MgB₂ increased with increasing amount of the milled B or the nano powder. The used of the milled B and nano B power promoted the formation MgB₂ during heat treatment. In addition to the enhanced formation of MgB₂, the use of the powders reduced the grain size of MgB₂. The use of the milled and nano B powder increased the J_c of MgB₂. The highest J_c was achieved when 100% nano B powder was used. The J_c enhancement is attributed to the high volume fraction of the superconducting phase (MgB₂) and the large grain boundaries, which induces the flux pinning at the magnetic fields.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.120-125
• /
• 2004

In the rolling of steel or non-steel metal the most important quality aspect are thickness and flatness. In thickness, there are two important factors. One of them is getting close with accurate goal, nominal gauge, the other is minimize gauge bandwidth, the variation in gauge. In this thesis, we proposed the fuzzy model AGC to minimize gauge variation along the length, developed the rolling mill dynamic model using the math mode of the rolling mill process and the rolling model related with the variety character of the rolling material. We compared the gauge control efficiency of fuzzy model AGC and PI mass flow AGC. We have got a simulation result, that the exit gauge variation of PI mass flow AGC was 2 micron and fuzzy model AGC was 1.2 micron at 1200mpm of rolling speed when each controller was rolling 5 micron of material that is the entry gauge variation.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.166-168
• /
• 2007

고분자 전해질 연료전지는 다수의 단위 cell을 적층하여 stack을 형성하게 되며, 각 단위 cell 은 분리판과 MEA 사이에 gasket을 장착하게 된다. 이때 장착된 gasket은 분리판과 MEA사이의 일정한 gap을 유지하여 가스를 균일하게 분배되도록 할 뿐만 아니라, 가스 유출을 막는 sealing 재(材)로서의 역할을 한다. 따라서 고분자 전해질 연료전지의 성능확보를 위해서는 내구성 및 가스 기밀성이 우수한 gasket 개발이 무엇보다 중요하다. 본 연구에서는 이러한 gasket 물성을 만족시킬 수 있는 고분자 전해질 연료전지용 gasket을 개발하고자 하였으며, 이를 검증하기 위하여 가혹 조건에서 실험을 수행하였다. 그 결과 종래의 gasket 보다 열적, 화학적 및 가스기밀성 변에서 우수한 고분자 전해질 연료전지용 gasket을 얻을 수 있었다.

• 소성∙가공
• /
• 제15권1호
• /
• pp.71-75
• /
• 2006

In recent, various shapes of pattern in micron or nano scale are adapted in many applications due to their good mechanical or optical properties. Light guide panel (LGP) of the LCD is one of important applications for micro pattern and micro prism shape is one of the typical patterns. The size of the surface patterns in most applications is decreasing to the order of micron or even under micron. On the other hand, the area to be patterned keeps enlarging. These two trends in patterned products require tooling micro patterns on large surface, which has still many technical problems to be solved mainly due to pattern size and the tooling area. In this study, we fabricated prism shape of patterns using diamond cutting tool on some metal core and plastic core like PMMA. Some cutting conditions were investigated including cutting force, cutting depth and speed for different core materials.

• 천문학회보
• /
• 제41권2호
• /
• pp.50.1-50.1
• /
• 2016

We have found cool homopause temperatures (Kim et al. 2016) of 180 - 250 K for the 8-micron North Polar Hot Spot (8NPHS) of Jupiter, which has been observed to be stationary at 180 deg (SysIII) longitude since the early 1980s. The 3-micron spectro-images of Jupiter that we analyzed were obtained with GNIRS, Gemini Near-Infrared Spectrograph at Gemini North on January 13, 2013(UT), and at $8{\mu}m$ on Feburary 6, 2013(UT) with TEXES, the Texas Echelon Cross Echelle Spectrograph at the NASA IRTF. The cool homopause was unexpected, and a possible implication of the relatively cool 8NPHS homopause compared with those of other auroral regions will be presented.

• The Korean Journal of Ceramics
• /
• 제7권2호
• /
• pp.70-73
• /
• 2001

Phase transformation of TiSi$_2$ confined in sub-micron area of which the size is around or smaller than the grain size of C49 TiSi$_2$ phase is studied. It has been known that the C49 to C54 phase change is massive transformation that occurs abruptly starting from C54 nuclei located at triple point grain boundaries of C49 phase. When the C49 phase is confined in sub-micron area, however, the massive phase transformation is observed to be hindered due to the lack of the triple point grain boundaries of C49 phase. Heat treatment at higher temperatures starts to decompose the C49 phase, and the resulting decomposed Ti atoms diffuse to, and react with, the underneath Si material to form C54 phase that exhibits spherical interface with silicon. The newly formed C54 grains can also trigger the massive phase transformation to convert the remaining undecomposed C49 grains to C54 grains by serving as nuclei like conventional C54 nuclei located at triple point grain boundaries.