• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.31.1-31.1
• /
• 2009

Carbon nanotubes (CNTs) are attractive material because of their superior electrical, mechanical, and chemical properties. Furthermore, their geometric features such as a large aspect ratio and a small radius of curvature at tip make them ideal for low-voltage field emission devices including backlight units of liquid crystal display, lighting lamps, X-ray source, microwave amplifiers, electron microscopes, etc. In field emission devices for display applications, the phosphor anode is positioned against the CNT emitters. In most case, light generated from the phosphor by electron bombardment passes through the anode front plate to reach observers. However, light is produced in a narrow depth of the surface of the phosphor layer because phosphor particles are big as much as several micrometers, which means that it is necessary to transmit through the phosphor layer. Hence, a drop of light intensity is unavoidable during this process. In this study, we fabricated a transparent cathode back plate by depositing an ultra-thin film of single walled CNTs (SWCNTs) on an indium tin oxide (ITO)-coated glass substrate. Two types of phosphor anode plates were employed to our transparent cathode back plate: One is an ITO glass substrate with a phosphor layer and the other is a Cr-coated glass substrate with phosphor layer. For the former case, light was radiated from both the front and the back sides, where luminance on the back was ~30% higher than that on the front in our experiments. For the other case, however, light was emitted only from the cathode back side as the Cr layer on the anode glass rolled as a reflecting mirror, improving the light luminance as much as ~60% compared with that on the front of one. This study seems to be discussed about the morphologies and field emission characteristics of CNT emitters according to the experimental parameters in fabricating the lamps emitting light on the both sides or only on the cathode back side. The experimental procedures are as follows. First, a CNT aqueous solution was prepared by ultrasonically dispersing purified SWCNTs in deionized water with sodium dodecyl sulfate (SDS). A milliliter or even several tens of micro-liters of CNT solution was deposited onto a porous alumina membrane through vacuum filtration. Thereafter, the alumina membrane was solvated with the 3 M NaOH solution and the floating CNT film was easily transferred to an ITO glass substrate. It is required for CNT film to make standing CNTs up to serve as electron emitter through an adhesive roller activation.

• Journal of Ecology and Environment
• /
• v.29 no.6
• /
• pp.565-572
• /
• 2006

This study examined the decomposition of blades and culms of aquatic emergent plant species, Zizania latifolia, Phragmites communis and Typha angustata, which were the most frequent in Lake Paldang. The experiment was carried out from July to December, 2005 in fresh water of lake Paldang using litter bag method. The litter bags had 1.2 mm mesh size and were suspended at 1 m depth of water surface. Remaining mass of blades and culms of each species after 97 days was 21.2% and 22.6% of initial mass in Z. latifolia, 32.5% and 56.4% in P. communis and 44.7% and 38.1 % in T. angustata, respectively. The plant tissue having high N concentration and low C/N exhibited the faster decay rate than the others. However, the tissue of high content of lignin, cellulose, lignin:N, and cullulose:N showed a slow decomposition rate. Water temperature was the most effective environmental factor on the emergent macrophyte litter decomposition in aquatic ecosystems. According to the water temperature, DO, $NO_3^-$-N, and total phosphate concentration were changed in the linear way. The mass loss of plant tissue of emergent macrophytes showed positive relationship with P concentration in water. The experiments on the decomposition of the litter using different mesh sized litter bag did not show significant differences between them. The results suggest that the decomposition of emergent macrophytes in fresh water of lake Paldang, which showed features of lentic and lower part of a stream, was affected by microbial activities better than the micro-invertebrates such as shredders.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.14-15
• /
• 2010

Recently there has been growing interest in topological insulators or the quantum spin Hall (QSH) phase, which are insulating materials with bulk band gaps but have metallic edge states that are formed topologically and robust against any non-magnetic impurity [1]. In a three-dimensional material, the two-dimensional surface states correspond to the edge states (topological metal) and their intriguing nature in terms of electronic and spin structures have been experimentally observed in bulk Bi1-xSbx single crystals [2,3,4]. However, if we want to know the transport properties of these topological metals, high purity samples as well as very low temperature will be needed because of the contribution from bulk states or impurity effects. In a recent report, it was also shown that an intriguing coupling between the surface and bulk states will occur [5]. A simple solution to this bothersome problem is to prepare a topological metal on an ultrathin film, in which the surface-to-bulk ratio is drastically increased. Therefore in the present study, we have investigated if there is a method to make an ultrathin Bi1-xSbx film on a semiconductor substrate. From reflection high-energy electron diffraction observation, it was found that single crystal Bi1-xSbx films (0${\sim}30\;{\AA}A$ can be prepared on Si(111)-$7{\times}7$. The transport properties of such films were characterized by in situ monolithic micro four-point probes [6]. The temperature dependence of the resistivity for the x=0.1 samples was insulating when the film thickness was $240\;{\AA}A$. However, it became metallic as the thickness was reduced down to $30\;{\AA}A$, indicating surface-state dominant electrical conduction. Figure 1 shows the Fermi surface of $40\;{\AA}A$ thick Bi0.92Sb0.08 (a) and Bi0.84Sb0.16 (b) films mapped by angle-resolved photoemission spectroscopy. The basic features of the electronic structure of these surface states were shown to be the same as those found on bulk surfaces, meaning that topological metals can be prepared at the surface of an ultrathin film. The details will be given in the presentation.

• Parasites, Hosts and Diseases
• /
• v.53 no.5
• /
• pp.553-559
• /
• 2015

Research on micro-level assessment of the changes of socio-economic status following health interventions is very scarce. The use of household asset data to determine wealth indices is a common procedure for estimating socio-economic position in resource poor settings. In such settings information about income is usually lacking, and the collection of individual consumption or expenditure data would require in-depth interviews, posing a considerable risk of bias. In this study, we determined the socio-economic status of 213 households in a community population in an island in the north-western Tanzania before and 3 year after implementation of a participatory hygiene and sanitation transformation (PHAST) intervention to control schistosomiasis and intestinal worm infections. We constructed a household 'wealth index' based housing construction features (e.g., type of roof, walls, and floor) and durable assets ownership (e.g., bicycle, radio, etc.). We employed principal components analysis and classified households into wealth quintiles. The study revealed that asset variables with positive factor scores were associated with higher socio-economic status, whereas asset variables with negative factor scores were associated with lower socio-economic status. Overall, households which were rated as the poorest and very poor were on the decrease, whereas those rated as poor, less poor, and the least poor were on the increase after PHAST intervention. This decrease/increase was significant. The median shifted from -0.4376677 to 0.5001073, and the mean from -0.2605787 (SD; 2.005688) to 0.2605787 (SD; 1.831199). The difference in socio-economic status of the people between the 2 phases was highly statistically significant (P<0.001). We argue that finding of this study should be treated with caution as there were other interventions to control schistosomiasis and intestinal worm infections which were running concurrently on Kome Island apart from PHAST intervention.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.1
• /
• pp.99-108
• /
• 2012

To consider geomorphological and geological characteristics to Gatbawi(the 500th natural monument), it was investigated with the aspect of scale, form, mineralogy, chemistry and weathered state. Showing typically erosional features, micro-terrains as sea cliffs, sea notches, marine plateaus and tafoni developed well on coastal areas near the monument. Sea cliffs are vertical and form sea notches in their bases. Coastal terraces are 3.5m in width and 20m in trace. Tafoni are honey combed. The monument is mainly composed of quartz, plagioclase, microcline, biotite, sericite in mineral and corresponded to crystalline tuff dominated in quartz and plagioclase. It has 23.60~28.27 wt.% of $Al_2O_3$, 3.27~5.80 wt.% of $Na_2O$, and 0.11~0.20 wt.% of Cl in chemical contents, leveling higher than those of earth crust standards. It is considerably weathered on the basis of CAI(77.42~83.93%). The monument is very useful for natural perspective tourism and education. Therefore, it is necessary that several ideas as guide plates, observing telescope, explaining guider, education programs connected with related services, touring goods, picture for books on utilization on the monument must establish.

• Economic and Environmental Geology
• /
• v.52 no.4
• /
• pp.275-290
• /
• 2019

Geochemical study was conducted to elucidate the origin of fluorine (F) distributed in the rocks within the four areas of Yongyudo and Sammokdo, Incheon, which have been used as the source area of land reclamation for the $3^{rd}$ and $4^{th}$ stage construction sites of the Incheon International Airport. The main geology of the study area is Triassic biotite granite. Fluorine is contained at high levels in biotite granite, mylonite, and dykes (andesite and, basaltic-andesite). Furthermore, the higher concentrations of fluorine in the biotite granite can be contributed to fluorite. The results of microscopic analyses reveal that the fluorite was mostly observed as small vienlets together with quartz. This features support that fluorite was naturally formed due to the secondary process of hydrothermal fluids. In addition, fluorine was investigated to be highly enriched in a large amount of mica within the veins. In the case of mylonite, a high levels of fluorine was contributed to a large amount of sericite. The sericites contained in the mylointe, differently to those of the biotite granite, filled the micro-fractures of quartz formed as a result of mylonitization and included small cataclastic quartz grains. This indicates that fluorine was naturally enriched due to the alteration of hydrothermal fluids filling fractured zones formed by mylonitization. Consequently, the results of petrological and mineralogical study confirm that the fluorine distributed in the rocks within the Yongyudo and Sammokdo originated naturally.

• Journal of Korean Society of Forest Science
• /
• v.108 no.2
• /
• pp.189-199
• /
• 2019

The forest management paradigm has recently shifted from focusing on commercial production to focusing on ecosystem management. Accordingly, a natural seedling regeneration method that has a naturally high affinity has attracted much attention in recent years. The aim of this study was to determine the relationship among various environmental factors, lower stratum vegetation, and seedling regeneration in Pinus densiflora forests. The survey site comprised 50 sectors divided using the line transect method, and the survey data were divided into those from wet habitat (19 sites) and dry habitat (31 sites), depending on the soil humidity, and were analyzed separately to show the close relationship between soil humidity and natural seedling regeneration. As a result, the dry habitat exhibited high seedling density (157,419 trees/ha), with the main species being Quercus serrata, Zanthoxylum piperitum, Smilax china, and Pueraria lobata, while wet habitat exhibited low seedling density (57,895 trees/ha), with the main species being Stephanandra incisa, Castanea crenata, Lespedeza maximowiczii, Lysimachia barystachys, Aralia elata, and Styrax japonicus. The height and root-collar diameter under wet conditions exhibited faster growth than those under dry conditions. Height growth by the root-collar diameter in dry habitat increased faster than that in wet habitat. It was also confirmed that seedling regeneration in wet habitat exhibited a rapid growth pattern 5 years after germination. These results suggest that the seedlings begin to grow more rapidly after a period of suppression by competition with surrounding plants. Considering an ecosystem or ecological management approach, specific practices, such as bush control and vine clearing in wet habitats, should be more intensively conducted, especially at the beginning of the management operations.

• Journal of Appropriate Technology
• /
• v.7 no.1
• /
• pp.51-58
• /
• 2021

This study proposes the design and implementation of a low-cost emergency ventilator which can be helpful during the COVID-19 pandemic where the supply of automatic ventilators is not smooth compared with the urgent demand worldwide. Easy implementation and lower price were made possible by using AMBU-bag and off-the-shelf embedded micro-controller board. Moreover, while 3D printing is used by companies and experts around the world to build prototype hardware, materials which are readily available from surrounding environments so that people in countries where it is difficult to access many advanced technologies could manufacture the system. The design features AMBU-bag automation, not use 3D printing, and it can contrl speed. By allowing speed control, ventilation can be performed according to the conditions of the patient being used. A complementary point in the study is that it is difficult to fix the start point of the wiper motor used first. A method for complementing this is a method for replacing the brush DC motor with a position feedback function. Secondly, the AMBU-bag may wear out in the long-term process of compressing the AMBU-bag because the arm and the fixing frame are made of wood. To complement this, the part of fixing frame and arm parts that the AMBU-bag touches need to be wrapped in a material such as silicon to minimize friction.

• Journal of the Korean Society for Library and Information Science
• /
• v.57 no.2
• /
• pp.435-452
• /
• 2023

This study experimented with automatic classification of subject headings using BERT-based transfer learning model, and analyzed its performance. This study analyzed the classification performance according to the main class of KDC classification and the category type of subject headings. Six datasets were constructed from Korean national bibliographies based on the frequency of the assignments of subject headings, and titles were used as classification features. As a result, classification performance showed values of 0.6059 and 0.5626 on the micro F1 and macro F1 score, respectively, in the dataset (1,539,076 records) containing 3,506 subject headings. In addition, classification performance by the main class of KDC classification showed good performance in the class General works, Natural science, Technology and Language, and low performance in Religion and Arts. As for the performance by the category type of the subject headings, the categories of plant, legal name and product name showed high performance, whereas national treasure/treasure category showed low performance. In a large dataset, the ratio of subject headings that cannot be assigned increases, resulting in a decrease in final performance, and improvement is needed to increase classification performance for low-frequency subject headings.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.4
• /
• pp.275-282
• /
• 1986

A series of studies on the properties of clayey terrace soils distributed at the inland (Yeongcheon) and coastal (Yeongjil) regions in Yeongnam district was carried out. On the base of the facts found and already reported about the macro morphological features as well as on pedological characters in micro scale, physicochemical properties, mineralogical characteristics etc., the present study dealt with soil genesis and tried to classify the soils for reasonable use and managements. 1. Although the both regions belonged to "Mesic" soil temperature regime and "red and yellow earths" areas of "Thornthwaite" pedo-climatic diagram, climatic indices as a soil forming factor indicate that the coastal Yeongil had milder than the inland Yeongcheon. 2. All the terrace soils had developed soil profiles with an "Argrllic B". Upyeong soils in Yeongil region had "Argillans" even in the "II B horizons" that possibly be "Paleo-argillic". 3. The bisequum profiles of Bancheon in Yeongcheon and Upyeong in Yeongil revealed that they were developed on Late Mesozoic shale and on semiconsolidated Tertiary deposits respectively, therefore the overlying clayey terrace deposits were assumed to be originated from the Early Quaternary deposits, Diluvium. 4. To supplement the Soil Taxonomy of USDA, the terrace soils with different degrees of gleyzation were classified as follows; Deogpyeong and Hwadong soils which have less than 50cm of paddified gley horizons (redness less than 0.5) in the upper part of the profiles by artificial surface irrigation, tentatively classified into "Anthrepiaquic Hapludalfs" and the Geugrag soils that have more than 50cm of paddified gley horizons within 1.2m of the profiles, into "Anthr-aquic Ochraqualfs" while the Upyeong soils that had greyish mottles in subsoils by natural ground water remain as an "Aquic Hapludalfs" the same as present. The Bancheon soils with free mottles are into "Typic Hapludalfs" as used at present.