• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.110-125
• /
• 2011

A number of the Bronze Age dwelling sites have been found and excavated in the Yoodoocheon, Onyangcheon and Baekseokdong basins. Two basins are located near Asan and Onyan in the Chungnam Province of South Korea. Baekseokdong is located in Cheonan, Chungnam. 207 dwelling sites are concentrated around the area of $1.3km^2$ in the Baekseokdong. 177 dwelling sites are sparse and distributed over the area of $1.3km^2$ in the Yongdoocheon and Onyangcheon basins. Most of the Bronze Age dwelling sites in those areas located on the hill. The hills have similar geomorphological environments except for slight differences in geological faces. This study analyzes geomorphological environments of the high-density residential zone of the Bronze Age in the Yoodoocheon and the Onyangcheon basins, and then compares them with the results in Baekseokdong. Study results show that high-density residential zone consists mainly of specific micro-landforms such as the Crest slope, the Crest flat and the Upper side slope, and southeast-facing aspect. A lot of Gentle slope lands were distributed in terms of terrain slope but it is far from specific geomorphological environments. This is not weighted in specific value. Our results show that the geomorphological characteristic derived from this study is major considerations to develop dwelling sites in the Bronze Age. This can be useful to discover the possible dwelling sites over other Chungnam hill regions.

• Journal of The Geomorphological Association of Korea
• /
• v.20 no.4
• /
• pp.1-13
• /
• 2013

Padori beach is one of the representative composite mixed beach in Korea and shows divert geomorphic landscape change. It belongs to the Taean National Park. The purpose of this study is to clarify movement mechanism of sediments from sediment distribution of Padori beach associated with morphology. In addition, it is to explain morphological landscape change under different wave and tide condition in the composite mixed beach consisting of a dissipative low tide terrace and a reflective beach face with a high tide range of 5 to 7m. The results of this study are: First, the mean grain size of sediments becomes smaller from the south of the beach, where there is a wide wave-cut platform, to the north because gravels are supplied from the wave-cut platform as well as sea-cliff in the south of the beach. A sedimentation pattern of the sandy gravel on the beach face and gravel on the berm, and gradation phenomena of grain size on cross-shore and alongshore direction in the beach can be explained with a pattern of sediment movement, overpassing, in the composite mixed beach. Second, micro-topography on beach face and berm were changed depending on effects of wave height and tide. As a result, in low-wave energy environments, a berm is developed in large size, and beach cusps are formed on the upper beach face, while in high-wave energy environments, a berm is built up in relatively small size, and mixture of sediments occur on the upper beach face.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.4
• /
• pp.398-404
• /
• 2015

In this paper, we describe the design and performance of a prototype multi-rotor unmaned aerial vehicle( UAV) platform featuring an inertial measurement unit(IMU) based autonomous-flying for use in bluetooth communication environments. Although there has been a fair amount of study of free-flying UAV with multi-rotors, the more recent trend has been to outfit hexarotor helicopter with gimbal to support various services. This paper introduces the hardware and software systems toward very compact and autonomous hexarotors, where they can perform search, rescue, and surveillance missions without external assistance systems like ground station computers, high-performance remote control devices or vision system. The proposed system comprises the construction of the test hexarotor platform, the implementation of an IMU, mathematical modeling and simulation in the helicopter. Furthermore, the hexarotor helicopter with implemented IMU is connected with a micro controller unit(MCU)(ARM-cortex) board. The micro-controller is able to command the rotational speed of the rotors and to get the measurements of the IMU as input signals. The control simulation and experiment on the real system are implemented in the test platform, evaluated and compared against each other.

• The KIPS Transactions:PartC
• /
• v.11C no.2
• /
• pp.193-202
• /
• 2004

Handoff if the most Important feature for the user's mobility in a cellular communication system, which is related to resource reservation at nearby cells. For efficient resource reservation, mobility prediction has been reported as an effective means to decrease call dropping probability and to shorten handoff latency in wireless cellular environments. Several early proposed handoff schemes making use of tile user's movement history on a cell-by-cell basis work on the assumption that the user's movements are restricted to the indoor locations such as an office or a building. However, those algorithms cannot be applied to a micro-cell structure or a metropolis with complicated structure of roads. In this paper, to overcome those drawbacks we propose a new mobility prediction algorithm, which stores and uses the history of the user's positions within the current cell to predict the next cell.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.1
• /
• pp.138-144
• /
• 2016

Titanium is resistant to general corrosion and in sea water because of the passivity layer film on the surface of material, but may be attacked by environments that cause breakdown of the protective oxide layer including hydrochloric, sulfuric and phosphoric acids. In this study, the Ti alloys were solution heat treatment 5hours at $1066^{\circ}C$ and $966^{\circ}C$, and followed by aging heat treated, 1, 4, 8 and 16 hours in $500^{\circ}C$, $600^{\circ}C$ and $650^{\circ}C$ respectively. The heat treated specimens were measured micro Vicker's hardness, and then accomplished electrochemical polarization test for comparing corrosion in 1N sulfuric acid solution. Additionally, micro structures were taken for corrosion tested specimens. The results showed that corrosion resistance was higher in solution heat treated alloy than base and age heat treated metal. Measured corrosion resistants were increased as increasing aging heat treatment time and temperature.

• Fashion & Textile Research Journal
• /
• v.2 no.5
• /
• pp.416-422
• /
• 2000

In this study, to find out the physiological reaction of the human body and the sensation of comfort when people are wearing sportswear which is made of waterproof breathable fabrics under general environmental conditions (temperature : $20{\pm}1^{\circ}C$, humidity : $60{\pm}5%RH$, air current : 0.1 m/sec) and rainy environmental conditions (temperature : $20{\pm}1^{\circ}C$, humidity : $60{\pm}5%RH$, air current : 0.1 m/sec, rainfall : 250 1/hr), we made an experiment with sportswear in an artificial climate chamber and studied the thermal physiological response and subjective sensation. Mean skin temperature of the subjects was low and had a big range of fluctuation in rainy environmental conditions of two condition. Temperature started to increase at the beginning of the exercise, reached the maximum at the 2nd level of the exercise and then started to decline. Rectal temperature showed a slighter increase and bigger range of fluctuation in general conditions than in rainy conditions. Except clothing micro climate in rainy conditions, temperature and humidity and their range of fluctuation around back were higher than those around chest. Humidity was high and had wide range of fluctuation in general conditions. Heart rate was 4.4 beats/min higher in general conditions. In subjective test on rainy conditions, the feeling of discomfort increased due to the raindrops fallen on the skin. Unlike that in general conditions, cold sensation increased and humidity sensation reached to the peak after the exercise. In wearing sportswear made of shape memory breathable waterproof fabric, controlling function over a small amount of heat and water was distinctive while it turned out to be not so comfortable over a large amount of heat and water. Through this, the limitation of shape memory breathable waterproof fabric was recognised.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.8
• /
• pp.767-773
• /
• 2010

This paper describes development of a non-explosive separation device which can be equipped on small satellites. The spur geared micro DC motor, which has high reliability and advantage of price, is adopted as an actuator. The proposed separation device has resettability and it does not need extra jig to reload. In addition, the simple structure makes it easy to fabricate and assemble. To verify the performance of the proposed device, the response time tests, maximum preload tests and maximum shock level tests were performed. Also, through the vibration tests and thermal vacuum tests, feasibility of the proposed separation device was shown in launching and space environments. Therefore, we expect that the proposed separation device can replace the imported separation devices in near future.

• Journal of Digital Convergence
• /
• v.13 no.9
• /
• pp.201-208
• /
• 2015

With services such as SNS and facebook, Big Data popularize the use of small size such as micro blogs are increasing. However, the problem of accuracy and computational cost of the search result of big data of a small size is unresolved. In this paper, we propose a subnet selection techniques based probability to improve the browsing speed of the small size of the text information from big data environments, such as micro-blogs. The proposed method is to configure the subnets to give to the attribute information of the data increased the probability data search speed. In addition, the proposed method improves the accessibility of the data by processing a pair of the connection information between the probability of the data constituting the subnet to easily access the distributed data. Experimental results showed the proposed method is 6.8% higher detection rates than CELF algorithm, the average processing time was reduced by 8.2%.

• YAKHAK HOEJI
• /
• v.45 no.5
• /
• pp.536-544
• /
• 2001

increase the viability of oral typhoid vaccine during the passage through the castro-intes-tidal tract, numerous attempts have been made including the vaccine coating. However problems such as high death rate during the coating process and its instability in the gastric juice still remain to be solved. In this study, the oral vaccine was made as the micro-enteric beads by adding Salmomella typhi Ty21a cells to sodium alginate solution and spraying onto calcium chloride solution (ionotropic relation method). The vaccine showed more than 90% of its original viability after treating it for 1 hour in the artificial gastric juice (37$^{\circ}C$, 300 rpm). The clearance rate of the Ty21a in the liver and spleen of the mice orally administrated with coated Ty21a was similar to that of the mice intraperitoneally administrated with uncoated Ty21a. The peripheral blood lymphocytes (PBL) isolated from the mice orally administered with this vaccine produced 15.5 fold higher specific IgA antibody titer than that from the control mice administerd with saline solution. furthermore, the mice treated with the coated Ty21a had higher survival rates (50~87%) than the control mice treated with saline solution (0~10%) in the intraperitoneal challenge test with wild type S. typhi Ty21a cells. These results suggest that the alginate-based coating technique is effective to protect live Ty21a from acidic environments, and produces better intestinal immune responses thereby providing a potentially excellent oral typhoid vaccine.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1519-1523
• /
• 2007

In this paper, we propose the fast and secure binding update protocol as handoff or handover in the micro and pico environment based on mobile IPv6. The nodes or routers on participating in this protocol generate their addresses from cryptographically generated addresses (CGAs) method unlike previous address generation method. The mobile node (MN) includes in home network or home link has limited power and computational abilities. So the home agent (HA) of the MN executes key agreement protocol with the correspondent node (CN) on behalf of the MN. The CN then creates a ticket on including session key, lifetime of ticket. and so on. It then transmits it to the MN via the HA of the MN. The ticket is used to communicate directly between the MN and its CN. In performance analysis, we analyze security of proposed binding update protocol under various attack scenarios and efficiency by comparing proposed protocol with prior binding update protocols. Finally we make a conclusion of this paper and present future works.