• Korean Journal of Materials Research
• /
• v.21 no.5
• /
• pp.288-294
• /
• 2011

Simultaneous Ni and C codeposition by electrolysis was investigated with the aim of obtaining better corrosion resistivity and surface conductivity of a metallic bipolar plate for application in fuel cells and redox flow batteries. The carbon content in the Ni-C composite plate fell in a range of 9.2~26.2 at.% as the amount of carbon in the Ni Watt bath and the roughness of the composite were increased. The Ni-C composite with more than 21.6 at.% C content did not show uniformly dispersed carbon. It also displayed micro-sized defects such as cracks and crevices, which result in pitting or crevice corrosion. The corrosion resistance of the Ni-C composite in sulfuric acid is similar with that of pure Ni. Electrochemical test results such as passivation were not satisfactory; however, the Ni-C composite still displayed less than $10^{-4}$ $A/cm^2$ passivation current density. Passivation by an anodizing technique could yield better corrosion resistance in the Ni-C composite, approaching that of pure Ni plating. Surface resistivity of pure Ni after passivation was increased by about 8% compared to pure Ni. On the other hand, the surface resistivity of the Ni-C composite with 13 at.% C content was increased by only 1%. It can be confirmed that the metal plate electrodeposited Ni-C composite can be applied as a bipolar plate for fuel cells and redox flow batteries.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.11
• /
• pp.848-853
• /
• 2010

We have grown GaN nanowires by the low pressure MOCVD method on Ni deposited oxidized Si surface and have established optimum conditions by observing surface microstructure and its photoluminescence. Optimum growth temperature of $880^{\circ}C$, growth time of 30 min, TMG source flow rate of 10 sccm have resulted in dense nanowires on the surface, however further increase of growth time or TMG flow rate has not increased the length of nanowire but has formed nanocrystals. On the contrary, the increase of ammonia flow has increased the length of nanowires and the coverage of nanowire over the surface. The shape of nanowire is needle-like with a Ni droplet at its tip; the length is tens of micron with more than 40 nm in diameter. Low temperature photoluminescence obtained from the sample at optimum growth condition has revealed several peaks related to exciton decay near band-edge, but does not show any characteristic originated from one dimensional quantum confinement. Strong and broad luminescence at 2.2 eV is observed from dense nanowire samples and this suggests that the broad band is related to e-h recombination at the surface state in a nanowire. The current result is implemented to the nanowire device fabrication by nanowire bridging between micro-patterned neighboring Ni catalysis islands.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.5
• /
• pp.280-288
• /
• 2016

Microelectronic product consumers may already be expecting another paradigm shift with smarter phones over smart phones, but the current status of microelectronic manufacturing engineering education (MMEE) in universities hardly makes up the pace for such a fast moving technology paradigm shift. The purpose of MMEE is to educate four-year university graduates to work in the microelectronics industry with up-to-date knowledge and self-motivation. In this paper, we present a comprehensive curriculum for a four-year university degree program in the area of microelectronics manufacturing. Three hands-on experienced-based courses are proposed, along with a methodology for undergraduate students to acquire hands-on experience, towards integrated circuits (ICs) design, fabrication and packaging, are presented in consideration of manufacturing engineering education. Semiconductor device and circuit design course for junior level is designed to cover how designed circuits progress to micro-fabrication by practicing full customization of the layout of digital circuits. Hands-on experienced-based semiconductor fabrication courses are composed to enhance students’ motivation to participate in self-motivated semiconductor fab activities by performing a series of collaborations. Finally, the Microelectronics Packaging course provides greater possibilities of mastered skillsets in the area of microelectronics manufacturing with the fabrication of printed circuit boards (PCBs) and board level assembly for microprocessor applications. The evaluation of the presented comprehensive curriculum was performed with a students’ survey. All the students responded with “Strongly Agree” or “Agree” for the manufacturing related courses. Through the development and application of the presented curriculum for the past six years, we are convinced that students’ confidence in obtaining their desired jobs or choosing higher degrees in the area of microelectronics manufacturing was increased. We confirmed that the hypothesis on the inclusion of handson experience-based courses for MMEE is beneficial to enhancing the motivation for learning.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.61-68
• /
• 2004

Recently, a fuel cell is remarkable for new generation system. The fuel cell is characterized by low voltage and high current. Therefor, for connecting to general load, it needs both a step up converter and an inverter. The proposed system consists of an isolated DC-DC converter to boost the fuel cell voltage to 380[Vdc] and a PWM inverter with LC filter to convert the dc voltage to single phase 220[Vac]. Also, bi-directional DC-DC converter for fuel cell generation system is composed to improve load response characteristic. In this paper, full bridge converter and the single phase inverter are designed and installed for fuel cell. Simulation and experiment verify that fuel cell generation system could be applied for the distributed generation.

• The Journal of the Korea Contents Association
• /
• v.11 no.4
• /
• pp.112-120
• /
• 2011

Korean Blood Services have grown with history of half a century or more, and in its developing process, technological growth have contributed largely toward it. However, Korean Red Cross and public blood centers are finding difficulty in their business because the public doesn't feel necessity of blood donation and have distrust in current blood management system. Recently, smart phone shows new possibility to the modern life as it plays a role of micro PC. With this tendency, mobile application is being highlighted as a new media. Therefore this paper aims to propose an application called 'Nanumi'(tentatively named) to improve negative awareness about blood donation. For specific development suggestion, I analyzed existing theses and applications. Also, I interviewed experts in blood management and did a public survey to firm up necessity and appropriateness of this research. In this paper, I proposed structure of functions and UI design for the application.

• Journal of computational fluids engineering
• /
• v.17 no.4
• /
• pp.16-23
• /
• 2012

Current display manufacturing processes apply thermal treatment of glass backplanes widely for hydrogen degassing, crystallization of thin-films, tempering, forming, and precompaction. Estimation of the characteristics of transient heating stages and thermal non-uniformities on a single glass substrate or in a stack of glasses are extremely helpful to understand non-homogeneity of mechanical and electronic features of nano/micro structures of end products. Based on simple heat transfer models and using an electric muffle furnace, temperature variations in a glass stack were predicted and measured for glass backplanes of $1.5{\times}1.85m^2$ in size and 0.7 mm in thickness. Except for the period of putting glass backplanes into the furnace, thermal radiation was the major heating mechanism for the treatment and theoretical predictions agreed well to the experimental temperatures on the backplanes. Using the theoretical model, thermal fields for a glass stack of glass-size, $2.2{\times}2.5m^2$, and of the number of sheets, 1 to 12, were calculated for practical design and manufacturing of the muffle furnace for large-scale displays, e.g. up to $8^{th}$ generation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.268-273
• /
• 2015

Recently many countries are researching actively underwater sensor networks for securing ocean resources and changes of ocean environment in all over the world. Current the commercial modem are not suitable because it has characteristics of long distance, higher price, larger power consumption with the special object mainly. In this paper, a low power and compact underwater communication modem which is suitable for underwater sensor networks is implemented. It is comprised by using a simple analog circuit for non-coherent BFSK modulation method, ultra low power MCU and orthogonal codes with a less operation and a simple implementation. It was experimented an underwater communication using our modem in a water tank and open sea farms. It communicates fewer than $10^{-4}$ bit error rate.

• Journal of Preventive Medicine and Public Health
• /
• v.39 no.3
• /
• pp.249-254
• /
• 2006

Objectives: This study was conducted to examine the factors related to the perceived peer smoking prevalence for adolescents. Methods: A self-administrated questionnaire was administered to 352 students in a technical high school in Kangwon Province in May, 2002. The questions included in the questionnaire were concerned with the estimated number of smokers among ten students of the same grade in their school, the sociodemographic characteristics, the smoking-related behaviors and attitudes, and the smoking-related environments. All the students had their expiratory carbon monoxide level measured with EC50 Micro-Smokerlyzer? to verify their smoking status. Multiple regression analysis was applied for data analysis using Windows SPSS 11.5. Results: The former and current smokers overestimated the peer smoking prevalence. Multiple regression analysis for estimating the peer smoking prevalence for the male showed that the perceived smoking prevalence was higher in the female students than in the male students, higher in those students whose mothers had a higher educational level, who had smoked more frequently, who had more best friends smoking, and who had a higher actual smoking rate of the class. For estimating the peer smoking prevalence for the female, the perceived smoking prevalence was higher in the female students than in the male students, higher in those who smoked more frequently, whose five best friends smoked, who had higher actual smoking rate of the class, and who had smoking siblings. Conclusions: This study showed that a higher perceived peer smoking rate is related with their own smoking history and smoking frequency, the smoking related environment, and gender. Smoking prevention and smoking cessation programs need to focus on correcting the falsely perceived smoking prevalence.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.498-498
• /
• 2013

Atmospheric Pressure Plasmas have pioneered a new field of plasma for biomedical application bridging plasma physics and biology. Biological and medical applications of plasmas have attracted considerable attention due to promising applications in medicine such as electro-surgery, dentistry, skin care and sterilization of heat-sensitive medical instruments [1]. Traditional approaches using electronic devices have limits in heating, high voltage shock, and high current shock for patients. It is a great demand for plasma medical industrial acceptance that the plasma generation device should be compact, inexpensive, and safe for patients. Microwave-excited micro-plasma has the highest feasibility compared with other types of plasma sources since it has the advantages of low power, low voltage, safety from high-voltage shock, electromagnetic compatibility, and long lifetime due to the low energy of striking ions [2]. Recent experiment [2] shows three-log reduction within 180-s treatment of S. mutans with a low-power palm-size microwave power module for biomedical application. Experiments using microwave plasma are discussed. This low-power palm-size microwave power module board includes a power amplifier (PA) chip, a phase locked loop (PLL) chip, and an impedance matching network. As it has been a success, more compact-size module is needed for the portability of microwave devices and for the various medical applications of microwave plasma source. For the plasma generator, a 1.35-GHz coaxial transmission line resonator (CTLR) [3] is used. The way of reducing the size and enhancing the performances of the module is examined.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.3
• /
• pp.167-171
• /
• 2007

Itraconazole is one of the most potent antifungal agents available in the market today. However, the low bioavailability due to its poor-water solubility calls for an alternative formulation to the current oral type. A topical itra-conazole-containing formulation may be of use for several reasons including the opportunity to reduce adverse events and generate high local tissue levels, more rapid drug delivery, and lower systemic exposure. The purpose of the present study was to investigate the vehicles for topical skin delivery of itraconazole. The effect of formulations on the hairless mouse skin permeation and deposition of itraconazole was determined using Franz diffusion cells at $37^{\circ}C$. Benzyl alcohol in micro-emulsion significantly increased the solubility of itraconazole, thereby increasing the skin permeation rate. However, lipo-some formulation showed the lowest solubility and permeation rate of itraconazole. Although the solubility of itraconazole in hydrogel formulation was lower than that in microemulsion, skin permeation rate was significantly higher probably due to its adhesive property. Therefore, microemulsion-based hydrogel formulation is expected to synergistically increase the skin permeation rate and skin deposition of itraconazole.