• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.123-132
• /
• 2000

To overcome problems of conventional glass ionomers, resin components have been added to glass ionomers. On a continuum between glass ionomers and composites are a variety of blends, employing different proportions of acid-base and free radical reactions to bring about cure. Popular groups defined between the ends are resin-modified glass-ionomers(RMGIs), polyacid-modified composite resins(Compomers) and ionomer modified resins. These groups show different clinical properties, and in selecting these materials for a restoration, one should sufficiently understand these different setting properties. In this study, some difference in the setting characteristics of different groups of hybrid ionomers were examined. Two RMGIs (Fuji2 LC,GC / Vitremer, 3M), three Compomers (Dyract AP, Dentsply / F2000, 3M / Elan, Kerr) were involved in this study. The identification of the setting characteristics of different groups was achieved by a two-stage study. First, thermal analysis was performed by a differential scanning calorimeter, and then the hardness of each group at different depth and time were measured by a micro-hardness tester. Thermal analysis was performed to identify the inorganic filler content and to record the heat change during setting process. The setting process was progressed for each material by chemical set mode and light-cured mode. In the hardness test, samples of materials were prepared with a 6mm-diameter metal ring, and the hardness was measured at the top, and 1mm, 2.5mm, 4mm below at just after a 40 second-cure, and after 10 minutes, 24 hours, and 7 days. Statistical analysis was performed by Mann-Whitney rank sum test to assess significant differences between set modes and types of materials, and by ANOVA and T-test to evaluate the statistical meanings of data at different times and depths of each materials. Followings are findings and conclusions derived from this study. Thermal analysis; 1. Compomers show no evidence of chemical setting while RMGIs exhibit heat output during the process of chemical setting. 2. Heat of cure of RMGIs exceed Compomers. 3. The net heat output of RMGIs through light-cured mode is higher than through chemically set mode. Hardness test; 1. Initial hardness of RMGIs immediately after light cure is relatively low, but the hardness increases as time goes by. On the contrary, Comomers do not show evident increase of the hardness following time. 2. Compomers show a marked decrease of setting degree as the depth of the material increases. In RMGIs, the setting degree at different depths does not significantly differ.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.645-655
• /
• 2019

In this study, colloidal microgel with viscoelasticity were prepared by using dispersion containing physical crosslinking agents and microgels with various strengths depending on the degree of cross-links.As the chemical crosslinking agent PEGDA400 content increased, hydrogels have various physical properties the swelling ratio decreased from $2.0{\times}10^4%$ to $6.0{\times}10^3%$ and increased viscosity by about 60%. The colloidal microgel was prepared with micro hydrogel grinded to $100{\mu}m$ size and the rheological behavior was confirmed with physical cross linking agent. A colloidal microgel having various viscosities was prepared by controlling starch and alginate based on micro-hydrogel containing 0.75% (w/v) of PEGDA400. In conclusion, these results would be highly useful for applying as a product that can give various physical properties to the colloidal suspensions, cosmetics, paint, and food industry.

• Composites Research
• /
• v.32 no.5
• /
• pp.199-205
• /
• 2019

The composite material has the advantage that the fibers can be arranged in a desired direction and can be manufactured in one piece. However, micro voids can be formed due to micro air, moisture or improper curing temperature or pressure, which may cause the deterioration in mechanical strength. In this paper, the composite panels with different thicknesses were made by varying the curing pressure in an autoclave vacuum bag process and their microporosities were evaluated. Microporosity was measured by image analysis method, acid digestion method, and combustion method and their correlation with ultrasonic attenuation coefficient was analyzed. From the test results, it was found that the acid digestion method had the highest accuracy and the lower the curing pressure, the higher the microporosity and the ultrasonic attenuation coefficient. In addition, the microporosity and the ultrasonic attenuation coefficient were increased as the thickness of the composite panel was increased at the same curing pressure.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.409-416
• /
• 2006

Real-time traveler information disseminated through Variable Message Signs (VMS) is known to have effects on driver route choice decisions. In the past, many studies have attempted to optimize the system performance using VMS message content as the primary control variable of driver route choice. This research proposes a VMS information provision optimization model which searches the best combination of VMS message contents and display sequence to minimize the total travel time on a highway network considered. The driver route choice models under VMS information provision are developed using a stated preference (SP) survey data in order to realistically capture driver response behavior. The genetic algorithm (GA) is used to find the optimal VMS information provision strategies which consists of the VMS message contents and the sequence of message display. In the process of the GA module, the system performance is measured using micro traffic simulation. The experiment results highlight the capability of the proposed model to search the optimal solution in an efficient way. The results show that the traveler information conveyed via VMS can reduce the total travel time on a highway network. They also suggest that as the frequency of VMS message update gets shorter, a smaller number of VMS message contents performs better to reduce the total travel time, all other things being equal.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.26 no.5
• /
• pp.1-18
• /
• 2023

The Ecosystem Conservation Levy (formerly known as the Ecosystem Conservation Cooperation Fund) system has been in place for 20 years, and it can be said that it has now entered the settlement stage. Based on an analysis of publicly available project implementation data from 2014 to 2020, we found that: 1) As the number of return projects increases, the targets of restoration technologies are also strengthening, and it is necessary to frame a series of processes from application, creation, and monitoring for some detailed projects to improve the effectiveness and efficiency of utilizing the levy. 2) Most of the implemented projects are applied as micro-ecosystem creation, but there are many cases where the contents of the project can be seen as other project categories. This shows that the purpose of the return project needs to be approached more clearly and suggests that institutional complementation is needed from the project application stage. 3) The detailed technologies applied tend to be gradually expanding, but most of them are technologies that are not differentiated from general development projects. It is urgent to secure a more technical identity, such as a range and list of utilized technologies suitable for the characteristics and purposes of return projects. 4) It is necessary to establish a relevant evaluation system or framework to utilize the monitoring results of restoration projects. 5) There have been few cases of application of single restoration technologies since the beginning, but the content and scope of the complexity tend to expand in recent years. Even if the objectives are not comprehensive and diverse, it can be seen that many parts of the projects are oriented toward convergence, so it is necessary to conduct separate research on this. 6) As for the direction of improvement of the return project, it is possible to consider expanding the restoration and conservation focus to partially accommodate the complexity of the natural environment and human ecology. It seems that the expansion of restoration technologies that consider the role and function of humans in the natural environment should be explored.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.3
• /
• pp.63-74
• /
• 2008

With the awareness that Sinyeongwol Sipgyeong(ten scenic spots in Yeongwol) were designed too hastily and only for PR purposes after the change in the tourism environment, this paper indicates that most tourism and culture sources in Yeongwol are related to King Danjong, the sixth king of the Joseon Dynasty. This study proposes a 'Storytelling Plan' for the landscape content called 'Cultural Landscapes - Yeongwol Palgyeong(eight scenic spots in Yeongwol)' after reviewing types and content of Yeongwol Palgyeong through the halo effect of the well-known sad history of King Danjong and the cultural value of Yeongwol. The significance of the unity of the historic site and neighboring landscape is focused on by investigating the anaphoric relations between cultural landscape texts('Yeongwol Palgyeong') and historic content(the sad history of King Danjong). For this, the cultural lnddscape of Yeongwol has been framed and layered to make spatial texts. To emphasize the 'Telling' as well as the 'Story,' interesting episodes have been reviewed to discover a motive. To diversify the 'Telling' methods, absorptive landscape factors have been classified as 'Place,' 'Object' and 'Visual Point.' In addition the storytelling of Yeongwol Palgyeong was examined in consideration of the story and background of 'Yeongwol Palgyeong - Sad Story of King Danjong' and the interaction of a variety of cultural content by suggesting micro-content such as infotainment and edutainment as absorptive landscape factors. In order to make the storytelling plan available in practice as an alternative plan for Yeongwol Tourism, a visual point should be properly set to make the landscape look sufficiently dynamic. In addition, real landscape routes and narration scenarios should be prepared as well. Professional landscape interpreters who are well informed of the natural features of Yeongwol and the history of King Danjong should be brought into the project, and Internet and digital technology-based strategies should be developed.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.28 no.2
• /
• pp.81-88
• /
• 2008

The study was conducted to investigate the effects of DM (dry matter) content and split application of liquid swine manure (LSM) on productivity of rye and subsequent soil quality on the pasture of Livestock Policy Division, Jeju Special Self-Governing Province. The experiment was done between November, 2005 and June 2006, using split plot design. Treatments were 2 main plots (7.0 and 1.6% DM LSM) and 2 subplots (basal fertilizer 100% and basal fertilizer 50%+top dressing 50%). Application of 7.0% DM LSM resulted in significant increase in DM yield and plant length of rye compared with 1.6% DM LSM (p<0.05). Crude protein content of rye was significantly higher in split application(basal fertilizer 50%+ top dressing 50%) than in basal fertilizer 100% (p<0.05). No significant difference in macro and micro mineral contents of rye or in subsequent soil quality was found by application of LSM. Mean P content (0.16%) of rye appeared to be lower than proper P level $(0.2{\sim}0.4%)$ of grass crop. The pH (5.5), OM (13.3%), available $P_2O_5$ (47.6 mg/kg) and Ca (2.75cmole/kg) content of the pasture soil studied were lower, compared with those of cultivated soil. Results show that the application of a 7.5% DM liquid swine manure increases the productivity of rye compared with a 1.6% DM liquid swine manure, meanwhile the property of pasture soil was not influenced by application of LSM.

• Polymer(Korea)
• /
• v.32 no.4
• /
• pp.377-384
• /
• 2008

In this study, the microsphere silicone polymer beads were synthesized by UV irradiation and alkoxy hydrolysis. The coefficient of variation (CV) of microsphere silicone polymer beads were decreased with increasing UV intensity, reaction time. The mean particle diameter, refractive index, and pH value were $4.1{\mu}m$, 1.43 and 7.5, respectively. Also, the true and bulk specific gravity, moisture content were 1.30, and 0.40, below 2%. The mean particle diameter and CV were the lowest at 0.1 wt% hexamethyldisilazane (HMDS) and their roundnesses were $0.95{\sim}0.98{\mu}m$ values. The particle dispersion index of microsphere silicone polymer beads was 4.92 at 450 W, 90 min and the yield was increased to 11.3% at 20 wt% methyltrimethoxysilane (MTMS). The mean particle diameter was decreased with increasing the stirring rate and reaction temperature.

• Korean Journal of Materials Research
• /
• v.22 no.6
• /
• pp.275-279
• /
• 2012

(3-mercaptopropyl)trimethoxysilane (MPTMS) was used as a silylation agent, and modified silica nanoparticles were prepared by solution polymerization. 2.0 g of silica nanoparticles, 150 ml of toluene, and 20 ml of MPTMS were put into a 300 ml flask, and these mixtures were dispersed with ultrasonic vibration for 60 min. 0.2 g of hydroquinone as an inhibitor and 1 to 2 drops of 2,6-dimethylpyridine as a catalyst were added into the mixture. The mixture was then stirred with a magnetic stirrer for 8 hrs. at room temperature. After the reaction, the mixture was centrifuged for 1 hr. at 6000rpm. After precipitation, 150 ml of ethanol was added, and ultrasonic vibration was applied for 30 min. After the ultrasonic vibration, centrifugation was carried out again for 1 hr. at 6000rpm. Organo-modification of silica nanoparticles with a ${\gamma}$-methacryloxypropyl functional group was successfully achieved by solution polymerization in the ethanol solution. The characteristics of the ${\gamma}$-mercaptopropyl modified silica nanoparticles (MPSN) were examined using X-ray photoelectron spectroscopy (XPS, THERMO VG SCIENTIFIC, MultiLab 2000), a laser scattering system (LSS, TOPCON Co., GLS-1000), Fourier transform infrared spectroscopy (FTIR, JASCO INTERNATIONL CO., FT/IR-4200), scanning electron microscopy (SEM, HITACHI, S-2400), an elemental analysis (EA, Elementar, Vario macro/micro) and a thermogravimetric analysis (TGA, Perkin Elmer, TGA 7, Pyris 1). From the analysis results, the content of the methacryloxypropyl group was 0.98 mmol/g and the conversion rate of acrylamide monomer was 93%. SEM analysis results showed that the organo-modification of ultra-fine particles effectively prevented their agglomeration and improved their dispensability.

• Journal of Ginseng Research
• /
• v.37 no.3
• /
• pp.355-360
• /
• 2013

Ginseng cultivated and grown naturally under mountainous forest is formally called "Lin-Xia-Shan-Shen" (LXSS) and grown in manual condition is called garden ginseng (GG) according to Chinese pharmacopoeia (2010 edition). Usually the growing condition of LXSS is similar to wild ginseng and mostly used in Chinese folks in ancient times. The antioxidant properties of LXSS with different growing years were evaluated by their inhibitions of thiobarbituric acid-reactive substance (TBA-RS) formation in liver homogenate and 2, 2-diphenyl-1-picrylhydrazyl (DPPH)-radical scavenging activity comparing with those of GG. The inhibitions of different polar extracts (n-butanol and water) of LXSS and GG on TBA-RS formation were also evaluated. The results showed that the antioxidant effects of LXSS were higher than those of GG and the TBA-RS formation inhibition of LXSS with longer growing years were stronger than those with shorter growing years, while the DPPH-radical scavenging activity of LXSS did not show significant difference with the change of the growing year. The results indicated that the inhibitory effect of TBA-RS formation and the DPPH-radical scavenging of LXSS were correlated with the contents of ginsenosides. In adddition, the starch contents of LXSS and GG were determined by micro-amount method with spectrophotometer. It showed that the starch content in GG was higher than that of LXSS whose starch decreased gradually with the growing year.