• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.372-377
• /
• 2013

Machinable SiC ceramics are prepared with the addition of $Al_2TiO_5$. Ready-to-press SiC and $Al_2TiO_5$ powders are mixed and pressureless sintered at $1750^{\circ}C$ and $1850^{\circ}C$ for 1 h. The weight ratios of the SiC and $Al_2TiO_5$ powders are 100 : 0, 100 : 10, and 100 : 20. After sintering, only SiC peaks are detected in the X-ray diffraction analyses. The density, strength, and grain size of the SiC increase with increases in the $Al_2TiO_5$ content and sintering temperature. The $Al_2TiO_5$-doped specimens are easy to micro-hole machine. Based on the density and strength data, the ceramics sintered at $1850^{\circ}C$ can be used as machinable ceramics.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.13-16
• /
• 2006

This study investigates filed application in Daebul Free Trade Zone of a flowing method using drying shrinkage-reducing superplasticizer(SRS) and an insulating curing method using double bubble sheets. Test showed that fresh concrete satisfied target slump and air content. A structure adding SRS significantly decreased the total bleeding capacity and accelerated the setting time. As for the crack occurrence, the structure applying the flowing method and double bubble sheets simultaneously exhibited the most favorable crack endurance, while conventional concrete showed more than 1mm size of crack in overall, and a structure applying only the flowing method partially presented micro crack. For the area proportion of crack occurrence, the structure using the double bubble sheets indicated 9.8%, while others applying flowing method was 28%, compared with 100% of conventional one. Standard curing specimens had about $3{\sim}6%$ higher compressive strength than that of specimens cured at adjacent field construction. In addition, using SRS improved about $5{\sim}7MPa$, than that of conventional concrete at 91 days elapse.

• Korean Journal of Human Ecology
• /
• v.7 no.1
• /
• pp.43-50
• /
• 2004

The purpose of this study is to reach silk protein added in differing amounts to Jeolpyon, Korean traditional rice cake, using rice powder as its primary material, estimation of the micro organism quality, physicochemical property, sensory evaluation and the property of storage period (20${pm} 5 ^{\circ}C$). In the physicochemical property, the content of proximate composition of rice powder was measured as 38.11% of moisture, 56.62% of total sugar, 5.11% of crude protein, 0.52% of crude lipid, 0.25% of ash. And the raw material of silk protein was measured as 6.61% of moisture, 91.22% of crude protein, 6.41% of crude lipid and 0.75% of ash. The pH of raw material for rice powder and silk protein Jeolpyon showed mild acidity as 6.41 and 6.23, respectively. In rice powder and silk protein, total free sugar contents was 0.89% and 0.02%, and total amino acids contents was 4.28% and 52.21 %, respectively. For sensory evaluation. color, taste, softness and adhesiveness were significantly acceptable in control and adding 1 % silk protein. Control and samples added 1$\sim$3% silk protein had high sensory score color in overall acceptance. In conclusion. Jeolpyon can be manufactured with nutritious Jeolpyon by adding silk protein.

• Journal of the Korean Ceramic Society
• /
• v.20 no.2
• /
• pp.153-160
• /
• 1983

This study was carried out to research the change of mineral phases and the characteristics(apparent specific gra-vity water absorption firing shrinkage modulus of rupture thermal expansion and specific dielectric constant) of the sintered bodies manufactured by kaolin and limestone. Samples were composed of the same theoretical composition as it of anorthite and fired up to 145$0^{\circ}C$ Investigated the change and micro-structure of the mineral phases by XRD and SEM the characterisdtics of the sintered bodies by TMA Automatic Capacitance Bridge and etc. The results were as follow. 1. Reactions of sintering are occurred between 860-95$0^{\circ}C$ and 1200-138$0^{\circ}C$ and state of bloating is occurred at 1410-145$0^{\circ}C$ 2. For the inclusion of feldspar and its fine particles of materials the temperature of producing and collapsing is decreased. 3. Pseudo-wollastonite and gehlenite are formed about 95$0^{\circ}C$ 4. At 114$0^{\circ}C$ anorthite are begin to forming and increase continuously to 138$0^{\circ}C$. Above 141$0^{\circ}C$ content of anorthite are decreased. 5. The variations of bending strength with sintering temperature reflect similar trend of sintered contraction and in-crease continuously from 120$0^{\circ}C$. At 145$0^{\circ}C$ reached about 680kg/cm2. 6. Specific dielectric constant$($\varepsilon$_s)$ of specimen sintered at 141$0^{\circ}C$ is 7.12 and that value is most favorable.

• Journal of the Korean Ceramic Society
• /
• v.52 no.2
• /
• pp.165-170
• /
• 2015

We employed the high-pressure high temperature (HPHT) process to enhance the colors of natural sapphires to obtain a vivid blue. First, we analyze the content of the coloring agent $Fe_2O_3$ using the wavelength dispersive X-ray fluorescence (WD-XRF) method. The HPHT procedure operates under 1 GPa at various temperatures of 1700, 1750, and $1800^{\circ}C$ for 5 minutes using a cubic press. We determine the color changes using the optical microscopic images, UV-VIS near-infrared (NIR) spectra, micro-Raman spectra, and Fourier transform-infrared (FT-IR) spectra for all sapphire samples before and after the treatment. The optical microscopic results indicate that the HPHT process can enhance the sapphire color to a vivid blue at temperatures above $1750^{\circ}C$. The UV-VIS-NIR spectra identify the color changes explicitly and quantitatively through providing the Lab color scales and color differences. Both results demonstrate that the colors of natural sapphires can be enhanced to a vivid blue using the HPHT process above $1750^{\circ}C$ under 1 GPa for 5 minutes.

• Journal of Practical Engineering Education
• /
• v.8 no.1
• /
• pp.31-37
• /
• 2016

Five and above engineering courses were selected from each of exemplary international MOOC platforms, and common e-learning design strategies were drawn out through observing the courses and analyzing the course elements. By finding out both macro(platform) and micro(content) levels of designing strategies, this study suggests the direction for designing engineering courses incorporating e-learning nationally. The major trend of current e-learning design is to provide bite-sized contents rapidly created and to deploy instructional strategies for promoting student participation in learning and diverse and contextualized learning experiences.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.346-349
• /
• 2018

In North-East asian countries, laver cultivation has been an important marine industry in coastal areas as well as fishery because laver (Porphyra) is nutrient-rich food and has been used in many Asian cuisines. Laver is characterized by high concentrations of fiber and minerals, a low fat content, and, in some cases, relatively high protein levels. In this paper we inplimented design of fully automatic laver harvesting, nowdays most peoples are used to collect a laver harvesting by human, it is very defficult working, due to wind, waves, and the weather conditions which is hard to stand on the ship and holding the seaweed nets it can be injurced human, this is the reason to we are developed automatic harvesting method, in this project we proposed automatic harvesting collect method which is operated without human. Mainly we design and developed automated ship, This ship is devided in to three parts frist part is supporting roller, second part is drum screener, thried part is lifting mechanism. Thise are operated with hydro pnumatic equimpment, this divice are control with micro controller. The system prototype has implemented and satisfied by the performance to realize the further level.

• 보존과학연구
• /
• s.16
• /
• pp.59-111
• /
• 1995

Chemical composion and crystal form of Corrosion products found on archaeological iron objects were analyzed using X-ray fluorescence analysis, micro-X-ray powder diffraction analysis and ion chromatographic technique. The nature and behavior of the corrosion products were studied in order to aid in the conservation and restoration of burial iron objects. Twenty-two samples analyzed in this study were collected from iron object found in Korea and Japan. The corrosion products of iron objects from burial mounds contain $\alpha$-FeOOH, $\beta$-FeOOH, $\gamma$-FeOOH, $Fe_3O_4$and amorphous iron hydroxides. The content of $\alpha$-HeOOH is the greatest. Because, Ageing for long period should change the amorphous iron hydroxides is considerably less than that in usual atmospheric corrosion products. The concentration of chlorine and sulfine is remarkably variable ($Cl^-$ : 100- 30,000ppm, $SO_4^-2$ : 20-10,000ppm),but the reasons are unclear. The presence of generally high concentrations of chlorine and sulfine the corrosion products of iron objects seem to be influenced by the marine climatic condition. The presence of high chlorine and sulfine concentrations in the corrosion products of iron objects seem to be influenced by the marine burial environments.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.2
• /
• pp.155-160
• /
• 2005

Gravity thickening process has been widely used in WTP sludge thickening at domestic water treatment plant. The operation method of the process is very simple, however, the process requires long detention time about 24~48 hours for sludge thickening, uses polymer, and low total solids of thickened sludge to increase sludge thickening efficiency. To solve there problems, we studied about flotation process, especially, electro-flotation (EF) process in WTP sludge thickening. Electro-flotation process is simpler than dissolved-air-flotation(DAF) process because EF needs only electrode and current to generate micro-bubbles and the operation is easy. This study was performed at two batch columns to compare interface height, total solids, effluent turbidity between an electro-flotation thickening and a gravity thickening. According to the result, an electro-flotation thickening was that interface height was decreasing, total solids had high concentration, and effluent turbidity was low in comparison with a gravity thickening. Also, it will make the high efficiency of following process, such as a dehydrating process and digestive process. because of high total solids and low moisture content in the sludge.

• Korean journal of food and cookery science
• /
• v.19 no.4
• /
• pp.429-438
• /
• 2003

The optimization of Omija-pyun as a traditional dessert, with the most European taste and year round availability, was studied with regard to its texture. The response surface methodology was used to determine the optimal composition of Omija-pyun as a European style dessert. The texture, including the springiness, gumminess, cohesiveness, adhesiveness, hardness and chewiness, was measured using TPA parameters (TA-HD Texture Analyser, stable micro system, UK). The texture of Omija-pyun was influenced by pectin and sucrose to the first linear order. The properties of springiness and adhesiveness were influenced by pectin x pectin to the second quadratic order. No cross product effects between ingredients were found from the analysis. The maximum springiness was obtained with 42g of pectin, 450g of sucrose, 110g of glucose syrup and 4.8g of tartaric acid. The maximum chewiness was with 55g of pectin, 330g of sucrose, 140g of glucose syrup and 5.7g of tartaric acid. The maximum adhesiveness was achieved using 17g of pectin and 400g of sucrose. The gumminess and hardness increased with increasing pectin content, and a cross product effect was observed(Eds note: you said earlier that no cross product effects between the ingredients was found\ulcorner) between sucrose and glucose syrup.