• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.473-476
• /
• 2012

에너지는 인간사회가 필요로 하는 가장 중요한 자원중의 하나로서 에너지개발과 이용의 역사는 인류역사의 한 줄기를 이루고 있습니다. 특히 풍력의 환경 친화적인 에너지 개발의 필요성이 대두되면서 대체에너지에 대한 관심이 지속적으로 높아지고 있습니다. 본 논문에서는 스마트폰을 활용하여 초소형 수직축 풍력발전기에서의 에너지 생산량 및 효율을 기상청 기후변화 시스템의 풍속과 블레이드의 폭과 그 재질에 따른 실시간 에너지 생산 효율을 분석하는 시스템을 제시한다.

• Tribology and Lubricants
• /
• 제33권6호
• /
• pp.251-255
• /
• 2017

In this study, we aimed to clarify the wettability and anisotropic flow characteristics of rice leaves as a basic study for engineering applications of anisotropic flow characteristics of rice leaf surface. To investigate the surface structure of rice leaf, the micro grooves and asperities of rice leaves were analyzed and quantified by scanning electron microscope, Confocal laser scanning microscopy, and stylus profilometer. The analysis of the structure of rice leaf surface confirmed that asymmetrical cone - like protrusions in leaf veins were inclined toward the leaf tip. The static contact angle test showed that the contact angle at the midline vein or leaf vein location where the micropapilla is concentrated is about $20^{\circ}$ higher than the leaf blade position. The contact angles of fresh and dried rice leave were also compared. The dried rice leaves showed a contact angle of about $5^{\circ}$ to $15^{\circ}$ higher than that of fresh leaves, suggesting that the volume of the protrusions decreased as the water was removed, thus reducing the contact area with the droplet. In the contact angle history test the hysteresis in the leaf tip direction was found to be much lower than that in the leaf petiole direction. This results can be explained that asymmetrical cone - like protrusions had a significant effect on the droplet flow characteristics through contact angle hysteresis experiment.

• 헤리티지:역사와 과학
• /
• 제35권
• /
• pp.4-27
• /
• 2002

During the last 10 more years, more than one hundred of Paleolithic sites were found in the most part of the Korena peninsula by very active third generation of Paleolithic archaeologists. It became quite sure that most parts of the peninsula was populated during the late Pleistocene. High concentratin of Paleolithic sites in the Chollanamdo Province will be one of the most important field of paleolithic archaeology along with the sites in the Hantan -Imjin river basin. The begining of Upper Paleolithic is quite likley sometime earlier than 30,000 BP and possibly upto 40,000 BP. Micorlithic technology was probably introduced into the peninsula sometime around 20,000 BP. It is quite striking that the Acheulean-typed stone industry from the Chongokni site could be older than 350,000 BP that was estimated by sedimentation rate on the basis of the interval between two different types of Japanese tephras found at the site. More Acheulean-typed bifaces were found in some sites in the Hantan-Imjin river basin. Tanged point which originally found at the Suyanggae site were found at many Upper Paleolithic sites and was made until quite late period of Upper Paleolithic along with micro-blade.

• 대한환경공학회지
• /
• 제35권5호
• /
• pp.363-370
• /
• 2013

소수력발전은 하수처리장 에너지 자립을 위한 효과적인 대안이다. 본 연구는 유량변동이 크고 유효낙차가 낮은 중소형 하수처리장(기흥레스피아) 적용을 위해 피치조절형 세미카플란(semi-kaplan) 마이크로수력발전의 적용 타당성을 평가하였다. 가변피치 semi-kaplan 수차는 유량조절을 위한 가이드베인은 생략하고 피치조절형 런너를 장착하여 기계적 결함은 줄이면서 유량변동이 큰 처리장에 특화된 기술이다. 마이크로수력발전 시스템은 설계조건(유량 0.35 $m^3/s$, 유효낙차 4.7 m)에서 90.2%의 수차효율 달성이 가능하였고 발전용량은 13.4 kW로 산정되었다. 설비가동률 74%로 가동 시 연간 약 86.8 MWh 에너지 생산을 통해 2.1%의 에너지 자립이 가능하고 이는 연간 49톤의 $CO_2$ 감축효과와 맞먹는다. 경제성 평가결과 초기 건설공사비가 200,000,000원 이하인 경우에는 내부수익률은 6.1%, 순현가는 15,539,000원, 편익-비용률은 1.08, 투자회수년은 15.5년으로 경제성이 충분한 것으로 나타났다.

• 한국수소및신에너지학회논문집
• /
• 제33권1호
• /
• pp.95-104
• /
• 2022

Micro hydropower is a readily available renewable energy source that can be harvested utilizing hydrokinetic turbines from shallow water canals, irrigation and industrial channel flows, and run-off river stream flows. These sources generally have low head (<1 m) and low velocity which makes it difficult to harvest energy using conventional turbines. A horizontal-axis screw turbine was designed and numerically tested to extract power from such low-head water sources. The 3-bladed screw-type turbine is placed horizontally perpendicular to the incoming flow, partially submerged in a narrow water channel at no-head condition. The turbine hydraulic performances were studied using Computational Fluid Dynamics models. Turbine design parameters such as the shroud diameter, the hub-to-shroud ratios, and the submerged depths were obtained through a steady-state parametric study. The resulting turbine configuration was then tested by solving the unsteady multiphase free-surface equations mimicking an actual open channel flow scenario. The turbine performance in the shallow channel were studied for various Tip Speed Ratios (TSR). The highest power coefficient was obtained at a TSR of 0.3. The turbine was then scaled-up to test its performance on a real site condition at a head of 0.3 m. The highest power coefficient obtained was 0.18. Several losses were observed in the 3-bladed turbine design and to minimize losses, the number of blades were increased to five. The power coefficient improved by 236% for a 5-bladed screw turbine. The fluid losses were minimized by increasing the blade surface area submerged in water. The turbine performance was increased by 74.4% after dipping the turbine to a bottom wall clearance of 30 cm from 60 cm. The final output of the novel horizontal-axis screw turbine showed a 2.83 kW power output at a power coefficient of 0.63. The turbine is expected to produce 18,744 kWh/year of electricity. The design feasibility test of the turbine showed promising results to harvest energy from small hydropower sources.

• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.176-183
• /
• 2002

Plasma Display Panel(PDP) is a type of flat panel display utilizing the light emission produced by gas discharge. Barrier Ribs of PDP separating each sub-pixel prevents optical and electrical crosstalks from adjacent sub-pixels. The mold for forming the barrier ribs has been newly researched to overcome the disadvantages of conventional manufacturing processes such as screen printing, sand-blasting and photosensitive glass methods. The mold for PDP barrier ribs have stripes of micro grooves transferring glass-material wall. In this paper , Stripes of grooves of which width 48$\mu$m, depth 124$\mu$m , pitch 274$\mu$m was acquired by machining of single crystal silicon with dicing saw blade. Maximum roughness of the bottom of the grooves was 59.6 nm Ra in grooving Si. Barrier ribs were farmed with silicone rubber mold, which is transferred from grooved Si forming hard mold. Silicone rubber mold has the elasticity, which enable to accommodate the waviness of lower glass plate of PDP. The methods assisted by the microwave and UV was adopted for reducing the forming time of glass paste.

• 한국항공우주학회지
• /
• 제38권9호
• /
• pp.943-954
• /
• 2010

본 연구에 적용된 터빈은 반경류형이며, 동익의 외경은 108 mm이다. 터빈은 1.4-4.1%의 낮은 부분분사율에서 작동하므로 익형은 축류형으로 설계되었으며 3단으로 구성되었다. 터빈에서 부분분사율과 팁간극 및 노즐유동각의 변화에 따른 성능의 변화를 측정하였다. 또한 터빈의 단수를 변경하면서 각 단수에서 발생되는 출력의 차이에 대한 측정이 이루어졌다. 본 연구의 터빈은 다양한 작동조건에서 운전되므로 넓은 작동범위에 따른 비교를 위하여 회전수를 변경하면서 탈설계 영역에서의 성능 평가가 이루어졌다. 뿐만 아니라 다양한 작동조건에 합당한 시스템의 평가를 위하여 총비오크가 얻어졌다. 아울러 소형터빈의 설계 및 성능예측을 위하여 유동해석을 수행하였으며 얻어진 예측의 결과는 실험으로 얻어진 결과와 잘 일치하였다.

• Journal of Korean Neurosurgical Society
• /
• 제58권6호
• /
• pp.571-577
• /
• 2015

Direct removal of beak-type ossification of posterior longitudinal ligament at thoracic spine (T-OPLL) is a challenging surgical technique due to the potential risk of neural injury. Slipping off the cutting surface of a high-speed drill may result in entrapment in neural structures, leading to serious complications. Removal of T-OPLL with an ultrasonic osteotome, utilizing back and forth micro-motion of a blade rather than rotatory-motion of drill, may reduce such complications. We have applied the ultrasonic osteotome for posterior circumferential decompression of T-OPLL for three consecutive patients with beak-type OPLL and have described the surgical techniques and patient outcomes. The preoperative chief complaint was gait disturbance in all patients. Japanese orthopedic association scores (JOA) was used for functional assessment. Scores measured 2/11, 5/11, 2/11, and 4/11 for each patient. The ventral T-OPLL mass was exposed after posterior midline approach, laminotomy and transeversectomy. The T-OPLL mass was directly removed with an ultrasonic osteotome and instrumented segmental fixation was performed. The surgeries were uneventful. Detailed surgical techniques were presented. Gait disturbance was improved in all patients. Dural tear occurred in one patient without squeal. Postoperative JOA was 6/11, 10/11, 8/11, and 8/11 (recovery rate; 44%, 83%, 67%, and 43%) respectively at 18, 18, 10, and 1 months postoperative. T-OPLL was completely removed in all patients as confirmed with computed tomography scan. We hope that surgical difficulties in direct removal of T-OPLL might be reduced by utilizing ultrasonic osteotome.

• 대한기계학회논문집A
• /
• 제34권4호
• /
• pp.475-480
• /
• 2010

가스터빈 블레이드는 터빈 가동 시 발생하는 고온화염으로부터 블레이드를 보호하고, 구조물의 표면 온도를 안전한 수준으로 낮추기 위하여 블레이드 표면에 열차폐 코팅(TBC; Thermal barrier coating)을 하여 사용하고 있다. 본 논문에서는 가스터빈 1단 블레이드에 적용되는 코팅 방식을 이용하여 코인형 시험편을 제작하였고 열화 온도 및 유지 시간의 변화에 따른 코팅 계면 산화물의 성장 거동을 분석하였다. 코팅 단면에 대하여 코팅 계면 산화물의 두께와 마이크로 비커스 경도를 측정하여 열화 특성을 평가 하였다. 또한 성분분석을 통하여 미세조직의 변화를 관찰함으로써 열차폐 코팅의 열적 열화특성을 평가하였다.

• 한국항공우주학회지
• /
• 제37권9호
• /
• pp.889-898
• /
• 2009

본 연구에 적용된 터빈은 사류형 터빈이며 동익의 외경은 108 mm 이다. 터빈은 1.7-2.0%의 낮은 부분분사율에서 작동하므로 익형은 축류형으로 설계되었으며 2단으로 구성되었다. 분사가 축방향으로 형성된 경우와 반경방향으로 형성된 경우에 따른 성능특성의 차이가 연구되었다. 또한 터빈의 단수에 따른 성능특성도 비교 되었다. 터빈의 작동범위에 따른 비교를 위하여 회전수를 변경하면서 성능평가가 이루어졌을 뿐만 아니라 시스템의 평가를 위하여 총 비토오크가 얻어졌다. 사류형 터빈이므로 축방향으로 분사되는 경우가 반경방향으로 분사되어지는 경우보다는 양호한 성능을 얻었으며, 출구단 동익의 효과는 회전수에 의하여 좌우되지만 축방향 분사터빈 경우에 최대 7.8%의 비토오크 상승의 결과를 보여주었다.