• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.1207-1214
• /
• 2011

Design of 500W class UMGT(Ultra Micro Gas Turbine) for power generation is conducted. Basic design parameters are obtained by cycle analysis. Off-design performances are predicted by 1D aerodynamic design and 1D performance analysis of compressor and turbine. 3D impellers are designed and 3D performance analysis is carried out to predict the performance characteristics of UMGT. 1D and 3D performance analysis show similar results. Structure analysis is conducted to select materials. Titanium Alloy is proposed for structural stability.

• Journal of Power Electronics
• /
• v.13 no.6
• /
• pp.919-927
• /
• 2013

This paper proposes a Boundary Current Mode (BCM) control scheme to realize soft switching on a conventional single phase full bridge DC/AC inverter. This technique with the advantages of no auxiliary components, low cost, high efficiency, and simple in control, is attractive for micro-inverter applications. The operation principle and characteristic waveforms of the proposed soft switching technique are analyzed in theory. A digital controller is provided based on that theory. To balance the requirements of efficiency, switching frequency, and inductor size, the design considerations are discussed in detail to guide in BCM inverter construction. A 150W prototype is built under these guidelines to implement the BCM control scheme. Simulation and experiment results demonstrate the feasibilities of the proposed soft switching technique.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.379-380
• /
• 2007

본 연구에서는 대용량변압기의 주 소음원인 120[Hz]와 240{Hz] 및 360[Hz] 주파수에 대한 다중음을 다채널(4채널)의 FXLMS 알고리즘을 적용한 변압기 소음 감쇠시스템을 구축하고 현장실험을 통해 소음이 저감되는 것을 확인하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.2
• /
• pp.144-149
• /
• 2016

This paper presents a power control method of high-speed single-phase BLDC motor. Most electric appliances require a power factor corrector (PFC) to mitigate grid current harmonics. However, the reactive components and power semiconductors in the PFC increase system cost and dimension. In this paper, a new motor drive system for a high-speed single-phase BLDC motor is proposed, which can decrease grid current harmonics without PFC by directly manipulating motor power and eliminating bulky electrolytic dc-link capacitor. Given that the proposed motor power control method does not require motor current controller, no current sensor is necessary. Moreover, the proposed algorithms can be easily implemented using a low-cost micro-controller. The effectiveness of the proposed power control method is verified by experiments.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1015_1016
• /
• 2009

최근 대체조명으로 Power LED가 각광받고 있다. 그러나 반도체 소자인 Power LED의 특성에 의해 기존의 정전압 제어방식으로는 적절한 제어에 어려움이 있다. 이러한 문제의 해결책으로 본 연구에서는 Power LED를 MCU(Micro Controller Unit)를 이용한 디지털 정전류 제어방법에 대하여 서술하였다.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.564-568
• /
• 1998

All elements and systems of electronics have optimum temperature conditions. A using of the thermoelectric method of cooling is the most approach for the thermal management of power electronics. An analysis of using the thermoelectric cooling and the temperature control is given as an efficient method of ensuring a work of power electronic devices in conditions of micro-miniaturization.

• 한국초전도학회:학술대회논문집
• /
• v.11
• /
• pp.53-53
• /
• 2001

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.495-496
• /
• 2007

An Over Current Relayng algorithm using 80c196kc micro processor was realized in this paper. This OCR Algorithm was verified with simulated fault signal. The fault signal was made by EMTP and realized by DOBLE to compare H/W test with S/W test. This simulations showed similar result between H/W and S/W test.

• Journal of Industrial Technology
• /
• v.24 no.A
• /
• pp.83-90
• /
• 2004

Generally, electronic appliances are used on the basis of normal power source supply. The power source inevitably includes the abnormal condition, such as, sudden voltage sagging, power interrupt, and induced noises. As the electronic appliances which include micro-controller-based circuits are being increased recently, the controller circuit sometimes malfunctions by the abnormal condition of the power source. This situation causes serious problems such as hitch of electric appliance, fire and medical instrument glitch, which produces serious situations. In this paper, development of power interrupt tester which is highly suitable for an endurance test device under abnormal power source to microprocessor-based circuits is proposed 89C2051 microcontroller is performed to make power interrupt signal, and software controls peripheral hardwares and built-in functions. Experimental results of this study will offer a good application to electronic appliance maker as a test device of hardware and software debugging use.

• Proceedings of the KIEE Conference
• /
• 1986.07a
• /
• pp.173-176
• /
• 1986