• 한국연소학회:학술대회논문집
• /
• 2002.11a
• /
• pp.237-240
• /
• 2002

Micro catalytic reactors are alternative propulsion device that can be used on a nano satellite. When used with a monopropellant, $H_2O_2$, a micro catalytic reactor needs only one supply system as the monopropellant reacts spontaneously on contact with catalyst and releases heat without external ignition, while separate supply lines for fuel and oxidizer are needed for a bipropellant rocket engine. Additionally, $H_2O_2$ is in liquid phase at room temperature, eliminating the burden of storage for gaseous fuel and carburetion of liquid fuel. In order to design a micro catalytic reactor, an appropriate catalyst material must be selected. Considering the safety concern in handling the monopropellants and reaction performance of catalyst, we selected hydrogen peroxide at volume concentration of 70% and perovskite redox catalyst of lantanium cobaltate doped with strondium. Perovskite catalysts are known to have superior reactivity in reduction-oxidation chemical processes. In particular, lantanium cobaltate has better performance in chemical reactions involving oxygen atom exchange than other perovskite materials. In the present study, a process to prepare perovskite type catalyst, $La_{0.8}Sr_{0.2}CoO_3$, and measurement of its propellant decomposition performance in a test reactor are described.

• Corrosion Science and Technology
• /
• v.22 no.4
• /
• pp.265-272
• /
• 2023

The aim of this study was to develop a new in-situ observation method and instrument in micro-scale to investigate the mechanism of stress corrosion cracking (SCC) initiation of Ni-base alloys in a high temperature water environment of pressurized water reactors (PWRs). A laser confocal microscope (LCM), an autoclave with diamond window view port, and a slow strain-rate tester with primary water circulation loop system were components of the instrument. Diamond window, one of the core components of the instrument, was selected based on its optical, chemical, and mechanical properties. LCM was used to observe the specimen in micro-scale, considering the experimental condition of a high-temperature primary water environment. Using in-situ method and instrument, it is possible to observe oxidation and deformation of specimen surface in micro-scale through the diamond window in a high-temperature primary water in real-time. The in-situ method and instrument developed in this work can be utilized to investigate effects of various factors on SCC initiation in a high-temperature water environment.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.1108-1115
• /
• 2024

Assuring physical security for Micro Modular Reactors (MMRs) will be key to their licensing. Economic constraints however require changes in how the security objectives are achieved for MMRs. A promising new approach is the so-called performance based (PB) approach wherein the regulator formally sets general security objectives and leaves it to the licensee to set their own specific acceptance criteria to meet those objectives. To implement the PB approach for MMRs, one performs a consequence-based analysis (CBA) whose objective is to study hypothetical malicious attacks on the facility, assuming that intruders take control of the facility and perform any technically possible action within a limited time before an offsite security force can respond. The scenario leading to the most severe radiological consequences is selected and studied to estimate the limiting impact on public health. The CBA estimates the total amount of radionuclides that would be released to the atmosphere in this hypothetical scenario to determine the total radiation dose to which the public would be exposed. The predicted radiation exposure dose is then compared to the regulatory dose limit for the site. This paper describes application of the CBA to four different MMRs technologies.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3919-3927
• /
• 2022

This study presents an optimal design of the coolant system of a non-refueling full-life small reactor by analyzing the space-integrated geometrical and electromagnetic variables of an extra vessel electromagnetic pump (EVEMP) for the circulation of a lead-bismuth eutectic (LBE) coolant. The EVEMP is an ideal alternative to the thermal-hydraulic system of non-refueling full-life micro reactors as it possesses no internal structures, such as impellors or sealing structures, for the transportation of LBE. Typically, the LBE passes through the annular flow channel of a reactor, is cooled by the heat exchanger, and then circulates back to the EVEMP flow channel. This thermal-hydraulic flow method is similar to natural circulation, which enhances thermal efficiency, while providing a golden time for cooling cores in the event of an emergency. When the forced circulation technology of the EVEMP was applied, the non-refueling full-life micro reactor achieve an output power of 60 MWt, which is higher than that achievable via the natural circulation method (30 MWt). Accordingly, an optimized EVEMP for Micro URANUS with a flow rate of 4196 kg/s and developed pressure of 73 kPa under a working temperature of 250 ℃ was designed.

• Parasites, Hosts and Diseases
• /
• v.21 no.2
• /
• pp.246-256
• /
• 1983

As epidemiological parameters of human paragonimiasis, the positive rates of intradermal test and the sputum/stool ekaminations have long been employed in population surveys. However, both the specificity of the intradermal test and the sensitivity of sputumjstool examination have been gradually declined as the endemicity was lowered; thus the gap between above two parameters widened. In such context, the development of a new epidemiologic parameter or tool which makes it possible to accurately discriminate the active paragonimiasis cases was necessary. In the present study, the detection rate of Paragonimus-speclac IgG antibody by micro-ELISA was evaluated as an indicator of epidemiologic status of human paragonimiasis in a population. A total of 4, 285 students and inhabitants living in Bukpyeong Myeon and Bukil Myeon, Haenam Gun, Jeonlanam Do was surveyed in October, 1983 by intradermal test first. Out of them, 244 cases (5.7%) were found positively reacted to VBS antigen of F. westermani. Out of 168 positive reactors, 7 cases (4.2%) were egg positive either by two times of sputum examination or by one stool examination. That indicated that only 0. 16% of total surveyed were confirmed as active paragonimiasis by egg detection. When sera collected from 239 positive reactors of Intradermal test were tested by micro-ELISA for their specific IgG antibody, 40 cases(16.7%) were found to be positive. All of 7 egg positive cases were again positive for specific IgG antibody. Among remaining 232 intradermal test positive cases, 33 cases were positive for IgG antibody. In contrast to those, none of 42 positive reactors to intradermal test for Cloncrchis and of 128 intradermal test negative cases showed positive for Paragcnimus-specIfic IgG antibody. The rate of specific IgG antibody as detected by micro-ELISA appeared to be increased with the wheal size of the intradermal test. When the wheal sixte was over 13mm in diameter, about 50% of them were positive for specific IgG antibody. Thirty-one specific antibody positive cases were clinically evaluated by laboratory examinations (repeated sputum examination, peripheral eosinophil count and chest roentgenogram) and by history taking. Out of them 24 cases were associated with one or more positive laboratory findings: thus considered as active paragonimiasis cases. Out of 7 lab. finding-free cases 3 revealed past history of typical paragonimiasis symptoms, suggesting that they were in chronic or in convalescent stages. The remaining 4 cases were considered as either mild or ectopic infection cases; the possibility of cross-reaction with other helminthiases could not be ruled out. From the above results, it was inferred that the detection of Paragonimus-specIfic IgG antibody by micro-ELISA was very much helpful in detecting the active cases as well as in proper evaluation of the endemicity of human paragonimiasis in a population. The convenience of mass haildling of sera in micro-ELISA was considered another superiority as an epidemiologic tool.

• Journal of Environmental Health Sciences
• /
• v.24 no.1
• /
• pp.104-111
• /
• 1998

The utilization of food garbage as composting was investigated by using the batch reactor and by varying the initial temperature of the fermentation reactors. As the straw controlled under 50 to 55% of moisture content and mixed 5% of EM(Effective Micro-organisms) microbial agent. An agitator continuously operated 1 rpm, supplying the amount of air(2l/kg.min). Reactor temperature changed three type of 40$\circ$C, 50$\circ$C, 60$\circ$C. In the case of 50$\circ$C operated 72 hr after organic contents showed lowest 48%, and weight reduction rate of showed 77%. The reaction gas was showed 30 min after 19. 9% of the lowest level at 20.9% concentration of oxygen and CO$_2$ gas was produced 0.9% due to organic disintegration on initial react time. NH$_4$, H$_2$ and CH$_4$ gas concentration showed 589 ppm lhr after, 83 ppm and 0.3%, but 8hr after gas product was complete. As using the straw of bulking agent, the Reduction by disintegration should be more effectively than composting.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.1
• /
• pp.1-10
• /
• 2011

Combustion and extinction limits in heat-recirculating excess enthalpy reactors employing both gas-phase and catalytic reaction have been examined with an emphasis Reynolds number (Re) effects and possible application to microscale combustion devices. In this paper, geometrically similar reactors of different physical sizes and different numbers of turns were tested with the aim of estimating for combustor characteristics. Combustion efficiency is estimated by measuring exhausted gases through the gas chromatograph. From these results the effect of scale and number of turns are demonstrated and optimal operating conditions for Swiss roll combustors are identified.

• Nuclear Engineering and Technology
• /
• v.49 no.8
• /
• pp.1669-1679
• /
• 2017

Background: Steam generator (SG) is one of the significant components in the nuclear steam supply system. A variety of SGs have been designed and used in nuclear reactor systems. Every SG has advantages and disadvantages. A brief account of some of the existing SG designs is presented in this study. A high surface to volume ratio of a SG is required in small modular reactors to occupy the least space. In this paper, performance improvement for SGs of integral small modular reactor is proposed. Aims/Methods: For this purpose, cross-grooved microfins have been incorporated on the inner surface of the helical tube to enhance heat transfer. The primary objective of this work is to investigate thermal-hydraulic behavior of the proposed improvements through modeling in RELAP5-3D. Results and Conclusions: The results are compared with helical-coiled SGs being used in IRIS (International Reactor Innovative and Secure). The results show that the tube length reduces up to 11.56% keeping thermal and hydraulic conditions fixed. In the case of fixed size, the steam outlet temperature increases from 590.1 K to 597.0 K and the capability of power transfer from primary to secondary also increases. However, these advantages are associated with some extra pressure drop, which has to be compensated.

• Nuclear Engineering and Technology
• /
• v.19 no.3
• /
• pp.198-204
• /
• 1987

A plant simulation code, MCSIM (Micro-Computer SIMulator), has been developed to simulate plant transient accidents for pressurized water reactors. Reactor coolant system is modeled using decoupled energy and momentum equations, drift flux two-phase flow model and integral momentum equation. A two-fluid pressurizer model is used to simulate the pressurizer dynamics. Pot Boiler model is used for steam generator, steady-state decoupled energy and momentum equations for secondary side system, and point kinetics equations for nuclear power calculation. For test of the present version of MCSIM, complete loss of flow and RCCA withdrawal accidents are calculated with MCSIM. The results are compared with those in FSAR of KNU 5 & 6.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.3983-3995
• /
• 2023

In fast reactors, restructuring of the fuel micro-structure driven by high temperature and high temperature gradient can cause the formation of columnar grains. The non-spheroidal shape and the non-uniform temperature field in such columnar grains implies that standard models for fission gas diffusion can not be applied. To tackle this issue, we present a reduced order model for the fission gas diffusion process which is applicable in different geometries and with non-uniform temperature fields, maintaining a computational requirement in line with its application in fuel performance codes. This innovative application of reduced order models as meso-scale tools within fuel performance codes represents a first-of-a-kind achievement that can be extended beyond fission gas behaviour.