• Korean Chemical Engineering Research
• /
• 제53권5호
• /
• pp.597-602
• /
• 2015

직경이 0.03 m이고 높이가 1.5 m인 마이크로 액적/기포 유동반응기에서 ZnO 입자의 연속제조 특성을 검토하였다. 마이크로 액적을 운반하는 기체의 속도는 6.0 L/min, 전구체 중 Zn이온의 농도는 0.4 mol/L로 유지하였다. ZnO 입자의 합성을 위한 반응의 온도(973 K~1,273 K)와 마이크로 기포의 유속 (0~0.4 L/min)이 합성된 ZnO 입자의 기공 특성에 미치는 영향을 고찰하였다. 본 연구의 실험범위에서 ZnO 입자의 합성온도는 1,073 K가 합성된 ZnO 입자의 기공을 극대화하는데 최적이었다. 또한, 반응기에서 연속 제조되는 ZnO 입자의 평균크기는 반응온도가 증가함에 따라 감소하였으며 입자의 표면은 점점 매끄럽게 단순화되었다. 반응기 내부에 마이크로 기포를 유입함으로써 유입하지 않는 경우와 비교하여 합성된 ZnO 입자 내부에 기공을 효과적으로 형성시킬 수 있었으며, 평균 BET면적을 58%까지 증가시킬 수 있었다. 마이크로 액적/기포 유동반응기를 사용하여 연속 합성한 ZnO 입자의 평균입도는 반응온도에 따라 $1.25{\sim}1.75{\mu}m$이었다.

• Korean Membrane Journal
• /
• 제1권1호
• /
• pp.1-7
• /
• 1999

Pd-ceramic composite membranes and catalytic membrane reactors(CMR) have been studied for hydrogen and its isotopes (deuterium and tritium) purification and recovery in the fusion reactor fuel cycle. Particularly a closed-loop process has been studied for recovering tritium from tritiated water by means of a CMR in which the water gas shift reaction takes place. The development of the techniques for coating micro-porous ceramic tubes with Pd and Pd/Ag thin layers is described : P composite membranes have been produced by electroless deposition (Pd/Ag film of 10-20 $\mu$m) and rolling of thin metal sheets (Pd and Pd/Ag membranes of 50-70 $\mu$m). Experimental results of the electroless membranes have shown a not complete hydrogen selectivity because of the presence of some defects(micro-holes) in the metallic thin layer. Conversely the rolled thin Pd and Pd/ag membranes have separated hydrogen from the other gases with a complete selectivity giving rise to a slightly larger (about a factor 1.7) mass transfer resistance with respect to the electroless membranes. Experimental tests have confirmed the good performances of the rolled membranes in terms of chemical stability over several weeks of operation. Therefore these rolled membranes and CMR are adequate for applications in the fusion reactor fuel cycle as well as in the industrial processes where high pure hydrogen is required (i.e. hydrocarbon reforming for fuel cell)

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제11권6호
• /
• pp.83-91
• /
• 2006

회분식 반응조에서 마이크로(mZVI) 및 나노(nZVI) 크기의 영가 철을 환원물질로 이용하여 고폭화약물질 3종에 대한 환원동역학을 측정하였다. 각 화약류를 이용하여 어미물질에 대한 nZVI와 mZVI의 비표면적 환원상수 $k_{SA}$과 비중량 환원상수 $k_{M}$을 측정한 후, 중간산물의 거동을 비교하였다. 그 결과 두 상수를 사용해서는 nZVI 반응조내 어미 물질과 중간환원산물들의 거동을 완전히 설명할 수 없었다. 화약물질을 mZVI로 처리한 반응조에서는 초기 환원물질인 nitroso-RDXs, nitroso-HMXs 및 hydroxylamino-TNT가 주로 축적되었으나, nZVI로 처리한 반응조에서는 동일한 겉보기 반응속도임에도 불구하고 환원말기물질인 극성중간산물들과 TAT가 축적되었다. 그러므로 중간산물들의 환원까지 고려하는 새로운 매계변수의 개발이 필요한 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제52권3호
• /
• pp.589-596
• /
• 2020

Many components in the assembly section of Sodium-cooled Fast Reactor are made of good corrosionresistant 316 LN Stainless Steel material. To avoid self-welding of the components with the coolant sodium at elevated temperature, hardfacing is inevitable. Ni-based colmonoy-5 is used for hardfacing due to its lower dose rate by Plasma Transferred Arc process due to its low dilution. Since Ni-Cr-B-Si alloy becomes very fluidic while depositing, the major height of the weld overlay rests inside the groove. Hardfacing is also done over the plain surface where grooving is not possible. Therefore, grooved and ungrooved hardfaced specimens were prepared at different travel speeds. Fe content at every 100 ㎛ of the weld overlay was studied by Energy Dispersive Spectroscopy and also the micro hardness was determined at those locations. A correlation between iron dilution from the base metal and the micro hardness was established. Therefore, if the Fe content of the weld overlay is known, the hardness at that location can be obtained using the correlation and vice-versa. A new correlation between micro hardness and dilution coefficient is obtained at different locations. A comparative study between those specimens is carried out to recommend the optimum travel speed for lower dilution.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XIII)
• /
• pp.717-720
• /
• 2003

A chromogenic biosensor employing microfluidics on a chip has been developed for the determination of high-density lipoprotein (HDL) cholesterol (HDL-C) in human serum. We have investigated a plain and effective method to immobilize enzymes within the microchip without chemically modifying micro-channel or technically micro-fabricating column reactor and fluid channel network. In assessing risk factors of coronary heart disease, a micro-chip system would minimize requirements of instrument and reagent handling.

• 대한기계학회논문집B
• /
• 제35권8호
• /
• pp.789-798
• /
• 2011

본 연구에서는 디젤엔진에서 배출되는 질소산화물의 저감을 위한 후처리장치인 LNT(Lean NOx Trap, 흡장형 De-NOx 촉매)의 특성을 파악하였다. 먼저 희박한 배출가스 상태에서의 질소산화물 중 산화질소에 대한 촉매의 기본적인 흡장성능을 알아본 후, 다양한 환원제를 분사하여 인위적으로 배출가스를 농후한 상태를 만들었다. 농후한 상태에서는 희박한 상태에서 촉매 내에 흡장되어 있던 산화질소가 촉매의 환원반응에 의해서 질소로 전환된 후 촉매후단부에서 산화질소 배출농도를 측정하였다. 본 연구에서 사용된 LNT(Lean NOx Trap)시편은 실제 디젤 차량에서 사용되는 LNT 촉매로부터 Reactor에 장착될 수 있도록 작은 사이즈로 절단 및 가공된 후, SUS304의 stainless 재질로 재가공 처리한 후에 Micro bench-flow reactor에 장착하였다. 분사된 피드가스성분들은 실제 배출가스의 분위기를 만들기 위해서 각각 3가지의 가열성분, 비가열 성분으로 나누어 분사된다. 이러한 조건들에서 다양한 반응온도와 공간속도를 반응변수로 하여 LNT(Lean NOx Trap)의 흡장성능과 환원제종류에 따른 산화질소의 배출특성을 파악하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.225-229
• /
• 2005

We have designed micro-fuel processor system, which consists of a steam reforming area and a PROX(preferential oxidation) area. Micro-fuel processor system generates $H_2$ rich gas from a methanol. In our experiment, we have integrated micro-fuel processor system using low temperature cofired ceramics (LTCC) process because LTCC is superior to other materials principally due to their high thermal and chemical stability, simpler fabrication processes, and lower materials cost. Therefore, we have studied and integrated micro-fuel processor system containing embedded heaters, cavities, and 3D structures of micro-channel with LTCC. Also we have optimized the LTCC process.

• Journal of Welding and Joining
• /
• 제9권4호
• /
• pp.60-68
• /
• 1991

The weld quality of end cap welds in Pressurized Heavy Water Reactor (PHWR) Fuel is extremely important for the fuel performance in the nuclear reactor. The quality of resistance upset welds is currently evaluated mainly by the metallographic examination although it reveals only two weld cross-sections in a circumference welds. This investigation was, firstly, carried out to determine whether the ultrasonic examination would be applied to detect weld defects in the end cap welds and, secondly, to measure the mechanical strength of upset butt welds as a function of phase shift percentage. The major results obtained in this study are as follows: 1. The weld current and amount of upset shrinkage linearly increased with increasing the phase shift percentage. 2. Above the phase shift 55%, the defects in the welds were completely eliminated with increasing the phase of sound weld was over the thickness of cladding tube. 3. The ultrasonic testing well detected such defects in the end cap welds as upset external crack, upset split, corner crack and irregular weld flash comparing with the results of metallography. 4. The micro-fissure in the corner of the end cap welds was reliably detected by ultrasonic testing. 5. The mechanical strength in the welds increased with increasing phase shift percentage but the fracture did't occur in the welds above 55%.

• Korean Chemical Engineering Research
• /
• 제57권2호
• /
• pp.259-266
• /
• 2019

Tuning of electro-optical properties of nano-structured $SnO_2:Ga$ powders in a micro drop fluidized reactor (MDFR) was highly effective to enhance the activities of powders to be used as sensor materials. The tuning was conducted continuously in a facile one-step process during the formation of powders. The microscopic hydrodynamic forces affected the band gap structure and charge transfer of $SnO_2:Ga$ powders through the oxygen and interfacial tin vacancies by providing plausible pyro-hydraulic conditions, which resulted in the decrease in the electrical resistance of the materials. The analyses of room-temperature photoluminescence (PL) spectra and FT-IR exhibited that the tuning could improve the surface activities of $SnO_2:Ga$ powders by adjusting the excitation as well as separation of electrons and holes, thus maximizing the oxygen vacancies at the surface of the powders. The scheme of photocatalytic mechanism of $SnO_2:Ga$ powders was also discussed.

• Environmental Engineering Research
• /
• 제24권2호
• /
• pp.202-210
• /
• 2019

In order to maximize the utilization of sewage sludge, a waste from wastewater treatment facility, the residual sewage sludge generated after lipid and carbohydrate extraction for biodiesel and bioethanol production was used to produce bio-oil by pyrolysis. Thermogravimetric analysis showed that sludge pyrolysis mainly occurred between 200 and $550^{\circ}C$ (with peaks formed around 337.0 and $379.3^{\circ}C$) with the decomposition of the main components (carbohydrate, lipid, and protein). Bio-oil was produced using a micro-tubing reactor, and its yield (wt%, g-bio-oil/g-residual sewage sludge) increased with an increase in the reaction temperature and time. The maximum bio-oil yield of 33.3% was obtained after pyrolysis at $390^{\circ}C$ for 5 min, where the largest amount of energy was introduced into the reactor to break the bonds of organic compounds in the sludge. The main components of bio-oil were found to be trans-2-pentenoic acid and 2-methyl-2-pentenoic acid with the highest selectivity of 28.4% and 12.3%, respectively. The kinetic rate constants indicated that the predominant reaction pathway was sewage sludge to bio-oil ($0.1054min^{-1}$), and subsequently to gas ($0.0541min^{-1}$), rather than the direct conversion of sewage sludge to gas ($0.0318min^{-1}$).