• 대한의용생체공학회:의공학회지
• /
• 제16권1호
• /
• pp.101-106
• /
• 1995

In this paper, the patient monitor consisting of ECG/Respiration Amplification, Front end CPU, Main CPU, Main Controller, Video Amplifier, Display Controller, Waveform Generator, Bus & Power Supply, 8097 Processor was developed. This patient monitor measures the patient's states in the hospital such as elecctro-cardiography, respiration, blood pressurae and temperature. The control and processing methods based on micro-processor employ the flexibility, extensibility over other conventional system. The followings are incorporated in this system. First, ECG/RESP measures the respiration by impedence pneumography. Second, FECPU utilizes an Intel 8031 microcontroller. Third, Controller function originate from a LSI CRT controller.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1445-1447
• /
• 2008

Micro crystal structure of polycrystalline MgO film is controlled by adjusting the energy of particles arrived at the substrate during deposition. The change of crystal structure affects on the total area of (200) surface where the oxygen vacancies are formed easily, resulting in the change of secondary electron emission (SEE) coefficient($\gamma$).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.564-568
• /
• 2006

Smooth picture module is operated by vibration to tilt the light from the DMD (digital micro mirror device) of DLP projection TV, which makes the screen of the TV smoother and DMD chip cost lower. To satisfy the vibration characteristics of smooth picture module, it is designed by optimizing moment of inertia, spring constant and damping coefficient, using structural and fluid dynamic simulation that showed a good agreement with experimental data. To reduce the material cost and moment of inertia, engineering plastic is used and the reliability is estimated. A VCM (voice coil motor) type actuator for smooth picture has to satisfy performance requirements such as higher driving force, lower power consumption, and lower cost. The initial design and optimization for VCM was performed using FE analysis. It allowed us to optimize the design of magnetic circuit of the proposed actuator to obtain higher force while maintaining a lower cost.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.146-149
• /
• 2004

We have studied a liquid crystal (LC) mode (named locked super homeotropic (LSH)) in which the LCs aligned homeotropically are locked by surrounding walls such as cubic, hexagonal and cylinder. In the device, the vertically aligned LCs tilt down symmetrically around the center of the cell when a voltage is applied and thus it exhibits wide viewing angle. The structure of this LSH mode is suitable for large-sized display panels. since the LCs are locked in micro domains the LCs do not flow to the bottom of the panel by gravity. This mode is applicable to achieve high performance TFT-LCD TV because of high performance characteristics such as high contrast, high brightness, wide-viewing angle.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.689-691
• /
• 2012

본 논문에서는 디스플레이장치에 필요한 MDDI 프로토콜 패킷생성방법을 소프트웨어로 구현하는 것을 제안한다. 이 논문에서는 최소한의 하드웨어 구성을 가지며, 소프트웨어를 이용하여 MDDI 프로토콜 패킷을 생성한다. 이것의 구현을 위해 고속 마이크로프로세와 FPGA로 하드웨어를 설계하였다. 소프트웨어로 생성한 패킷은 FPGA를 통해 LVDS 신호로 변환되어 출력된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.674-677
• /
• 2002

Vertically aligned CNTs were grown on Fe-deposited $SiO_2$ substrates using thermal CVD of acetylene gas. The size of Fe particle is controlled by the flow rate of $NH_3$ and pretreatment time, which leads to control the diameter of CNTs. As the diameter of CNTs decreases, the growth rate is enhanced with an inverse dependence of the CNT diameter. The growth rate of CNTs increases linearly as the growth time increases until 30 min but is rapidly decreased over 40 min. We found an inverse relation between the diameter and growth rate of carbon nanotubes. As the diameter of CNTs increases, the compartment layers of bamboo-shaped CNTs appear more frequently. A base-growth model is suitable to explain the dependence of growth rate and structure of CNTs on the diameter size of catalytic particles.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.670-673
• /
• 2002

We have investigated the catalyst effect on the growth and structure of CNTs using thermal chemical vapor deposition. The respective growth rate of CNTs shows that the performance of catalysts is in the order of nickel (Ni)>cobalt (Co)>iron (Fe). The average diameter of CNTs follows the sequence of Fe, Co, and Ni catalysts. The structure of CNTs reveals almost same morphology regardless of catalyst but the crystallinity of CNTs is largely dependent on catalyst. The crystallinity of CNTs synthesized from Fe catalyst is higher than that from Ni or Co catalyst. We demonstrate that the growth rate, the diameter, and the crystallinity of CNTs can be manipulated by selecting the catalysts.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.293-294
• /
• 2006

The conventional strain measuring device is costly and complicated - it is not simple to understand its structure. Hence, strain gage and the A/D converter are assembled to come up with a load and a strain measuring device. The device was tested for measuring the strain in a loaded specimen and the experimental results were compared to those obtained by a commercial strain indicator.

• 한국산학기술학회논문지
• /
• 제9권2호
• /
• pp.327-332
• /
• 2008

본 논문에서는 반도체 소자와 디스플레이 패널의 제조공정에 사용되는 플라즈마 식각장비의 RF 정합특성을 개선하기 위한 모듈을 제안하였다. 구동부의 기구 중 베벨기어를 웜기어로 새롭게 설계 제작하고 제어부도 원칩 마이크로 프로세서를 이용하여 재구성하였다. 개발된 모듈은 기존의 정합장치보다 다양한 공정변수에 대한 능동적인 대처가 가능하고, 모터의 흐름현상 등을 개선함으로서 RF 정합특성이 개선되어, 플라즈마 식각공정의 생산성을 향상시킬 수 있음을 보였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.133-134
• /
• 2000

Effect of nitrogen doping on field emission characteristics of patterned Diamond-like Carbon (DLC) films was studied. The patterned DLC films were fabricated by the method reported previously[1]. Nitrogen doping in DLC film was carried out by introducing $N_2$ gas into the vacuum chamber during deposition. Higher emission current density of $0.3{\sim}0.4$ $mA/cm^2$ was observed for the films with 6 at % N than the undoped films but the emission current density decreased with further increase of N contents. Some changes in CN bonding characteristics with increasing N contents were observed. The CN bonding characteristics which seem to affect the electron emission properties of these films were studied by Raman spectroscopy, x-ray photoemission spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR). The electrical resistivity and the optical band gap measurements showed consistence with the above analyses.