• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.881-882
• /
• 2009

• 대한기계학회논문집B
• /
• 제20권6호
• /
• pp.2005-2013
• /
• 1996

Particle paths and flow fields in a prototype differential mobility analyzer (DMA) were numerically analyzed solving Navier-Stokes equation, electric field equation and particle motion considering viscous drag force, Coulomb force and polarization force. Analytically predicted particle diameters for the prototype DMA are in good agreement with the measured particle diameters within $\pm$1%. And the analytically predicted particle diameters are also in good agreement with numerical results for the prototype DMA.

• 한국식품과학회지
• /
• 제25권5호
• /
• pp.541-545
• /
• 1993

Sieve shaker와 Elzone particle size analyzer에 의한 두 가지 방법으로 제분방법에 따른 입자크기를 조사하였다. 제분방법별로 제조한 쌀가루의 입도분포를 측정한 결과 입자크기는 제분방법에 따라 영향을 받았으며 표준망체를 이용한 Sieve shaker 방법보다 Elzone particle size analyzer를 사용한 방법이 정확도가 우수하였다. 입도분포를 측정한 결과 Pin mill의 경우 $200{\sim}270$mesh가 30.38%으로 가장 많았고 $60{\sim}500mesh$의 분포도를 가졌다. Colloid mill은 $140{\sim}200mesh$가 가장 많았으며, $40{\sim}500mesh$의 분포도를 가졌다. Micro mill은 500mesh 이상이 41.62%로 가장 많았고 $140{\sim}500mesh$의 분포도를 보여주었다. Jet mill은 500 mesh 이상의 분포도로 입자크기가 가장 미세하였다. 또한 미세한 입자일수록 L간과 a값이 증가하였다. 쌀가루의 집합체를 살펴본 결과 습식제분은 분리된 쌀가루의 집합체형태로 구성되어 있고 건식제분은 분활된 조직체로 구성되었다. 전자주사현미경은 Elzone particle size analyzer 방법과 같은 입자분포도를 나타내었고 제분방법에 따라 구조의 특성을 보여주었다.

• Journal of Electrical Engineering and Technology
• /
• 제1권3호
• /
• pp.387-395
• /
• 2006

A review on advanced flow visualization techniques is presented particularly for applications to micro scale heat and mass transport measurements. Challenges, development and applications of micro scale visualization techniques are discussed for the study of heating/evaporating thin films, a heated micro channel, and a thermopneumatic micro pump. The developed methods are (1) Molecular Tagging Fluorescence Velocimetry (MTFV) using 10-nm caged seeding molecules (2) Micro Particle Velocimetry (MPIV) and (3) Ratiometric Laser Induced Fluorescence (LIF) for micro-resolution thermometry. These three methods are totally non-intrusive techniques and would be useful to investigate the temperature and flow characteristics in MEMS. Each of these techniques is discussed in three-fold: (1) its operating principle and operation, (2) its application and measurement results, and (3) its future challenges.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.671-674
• /
• 2008

We investigate the slippage effect in a micro-channel depending on the surface characteristics; hydrophilic, hydrophobic, and super-hydrophobic wettabilities. The micro-scale grooves are fabricated on the vertical wall to make the super-hydrophobic surfaces, which enable us visualize the flow fields near walls and directly measure the slip length. Velocity profiles are measured using micro-particle image velocimetry (Micro-PIV) and compared those in the hydrophilic glass, hydrophobic PDMS, and super-hydrophobic PDMS micro-channels. To directly measure the velocity in the super-hydrophobic micro-channel, the transverse groove structures are fabricated on the vertical wall in the micro-channel. The velocity profile near the wall shows larger slip length and, if the groove structure is high and wide, the liquid meniscus forms curves into the valley so that the wavy flow is created after the grooves.

• 대한기계학회논문집B
• /
• 제28권5호
• /
• pp.587-593
• /
• 2004

In this paper, flow characteristics of plasma flow in a micro-tube were investigated experimentally using micro particle image velocimetry(micro-PIV). For comparison, the experiments were repeated for deionized(DI) wale. instead of plasma. Both velocity profiles of plasma and do-ionized water are well agreed with the theoretical velocity distribution of newtonian fluid. We also carried out generating plasma-in-oil droplet formation at a Y-junction microchannel. In order to clarify the hydrodynamic aspects involved in plasma droplet formation, Rhodamine-B were mixed with plasma only for visualization of plasma droplet. With oil as the continuous phase and plasma as the dispersed phase, plasma droplet can be generated in a continuous phase flow at a Y-junction. For given experimental parameters, regular-sized droplets are reproducibly formed at a uniform flow conditions.

• 비파괴검사학회지
• /
• 제28권2호
• /
• pp.131-136
• /
• 2008

정재초음파를 이용하면 유체에 잠겨 있거나 유체를 따라서 흐르는 미세 입자의 조작이 가능하다. 정재초음파 장이 입자에 힘을 작용하여 입자를 음압마디 또는 반음압마디로 이동시킨다. 본 연구에서는 정재초음파의 주파수를 조정함으로써 유동 중 미세 입자의 위치를 제어하는 방법을 제안하고자 한다. 이를 위해 먼저 수침형 초음파 트랜스듀서를 이용하여 폭 수 밀리미터의 미세 채널을 가지는 정재초음파 발생시스템을 구성하였다. 제안한 발생시스템을 이용하여 주파수 2 MHz부터 2.5 MHz까지 영역에서 정재초음파 장을 발생시키고, 물을 따라 흐르는 수 마이크로미터 내외의 탄화규소 입자가 음압 마디로 잘 이동함을 확인하였다. 이때, 미세 채널의 폭과 주파수가 입자의 거동에 미치는 영향을 관찰하였으며, 주파수가 미세입자의 이동 위치를 결정하는 중요한 파라미터임을 확인하였다. 결과적으로, 초음파의 주파수를 조정함으로써 입자의 이동 위치를 제어할 수 있음을 실험을 통해 확인하였으며 최대 범위는 약 261 마이크로미터이다. 본 연구로부터 유체내의 입자 조작에 있어서 정재초음파의 다양한 응용 가능성을 확인할 수 있었다.

• Journal of Pharmaceutical Investigation
• /
• 제34권1호
• /
• pp.23-27
• /
• 2004

The urushiol-ethanol corpuscle of 320 nM in average particle size was prepared and concentrated by ultra homogenization and centrifugation. The cytotoxic profiles of this particle for use as anti-tumor agent have been evaluated in vitro in cultures of human fibroblasts (MRC-9) and celvical carcinoma cells (CUMC-3). The cytotoxicty assays revealed that the inhibitor effect of $10^{-5}$ M urushiol-ethanol particle on the growth of MRC-9 was hardly detected, while CUMC-3 cells exhibited over 50% of growth inhibition under the same conditions. In addition, a clear multiple-unit ladder pater of apoptotic DNA was observed for the urushiol treated CUMC-3 cells. Thus, the results indicated that urushiol inhibited growth of celvical carcinoma cells by inducing apoptosis, which is a mechanism observed with other typical antitumor agents.

• 한국분무공학회지
• /
• 제17권3호
• /
• pp.128-133
• /
• 2012

The present study aims to examine the influence of flame spray distance on the thermal behavior of micro-metal particles and the morphological characteristics of $Ni_{20}Cr$ layers coated on the preheated SCM415 substrates by using the conventional flame spray system. Commercially available nickel-based $Ni_{20}Cr$ particles with a mean diameter of $45{\mu}m$ were used. In addition, CFD simulations using a commercial code (FLUENT ver. 6.3.26) were conducted to estimate temperature and velocity distributions of the continuous and discrete phases before impact on the substrate. From FE-SEM images of coated layers on the substrates, it was observed that as the spray distance decreased, the metal particle morphology showed splash-like patterns and such a short stretch shape, resulting from higher particle momentums and the impact of partially melted particles. Moreover, it was found that the spray distance should be considered as one of important parameters in controlling the porosity and the adhesion strength.

• 한국전기전자재료학회논문지
• /
• 제14권9호
• /
• pp.707-713
• /
• 2001

As the integrated circuit device shrinks to smaller dimensions, chemical mechanical polishing (CMP) process was requirdfo the global planarization of inter-metal dielectric (IMD) layer with free-defect. However, as the IMD layer gest thinner, micro-scratches are becoming as major defects. However, as the IMD layer gets thinner, micro-scratches are becoming as major defects. Micro-scratches are generated by agglomerated slurry, solidified and attached slurry in pipe line of slurry supply system. To prevent agglomerated slurry particle from inflow, we installed 0.5${\mu}{\textrm}{m}$ point of use (POU) filter, which is depth-type filter and has 80% filtering efficiency for the 1.0${\mu}{\textrm}{m}$ size particle. In this paper, we studied the relationship between defect generation and polished wafer counts to understand the exact efficiency fo the slurry filteration, and to find out the appropriate pad usage. Our experimental results showed that it sis impossible to prevent defect-causing particles perfectly through the depth-type filter. Thus, we suggest that it is necessary to optimize the slurry flow rate, and to install the high spray bar of de-ionized water (DIW) with high pressure, to overcome the weak-point of depth type filter.