• Journal of Korean Society of Forest Science
• /
• v.108 no.2
• /
• pp.189-199
• /
• 2019

The forest management paradigm has recently shifted from focusing on commercial production to focusing on ecosystem management. Accordingly, a natural seedling regeneration method that has a naturally high affinity has attracted much attention in recent years. The aim of this study was to determine the relationship among various environmental factors, lower stratum vegetation, and seedling regeneration in Pinus densiflora forests. The survey site comprised 50 sectors divided using the line transect method, and the survey data were divided into those from wet habitat (19 sites) and dry habitat (31 sites), depending on the soil humidity, and were analyzed separately to show the close relationship between soil humidity and natural seedling regeneration. As a result, the dry habitat exhibited high seedling density (157,419 trees/ha), with the main species being Quercus serrata, Zanthoxylum piperitum, Smilax china, and Pueraria lobata, while wet habitat exhibited low seedling density (57,895 trees/ha), with the main species being Stephanandra incisa, Castanea crenata, Lespedeza maximowiczii, Lysimachia barystachys, Aralia elata, and Styrax japonicus. The height and root-collar diameter under wet conditions exhibited faster growth than those under dry conditions. Height growth by the root-collar diameter in dry habitat increased faster than that in wet habitat. It was also confirmed that seedling regeneration in wet habitat exhibited a rapid growth pattern 5 years after germination. These results suggest that the seedlings begin to grow more rapidly after a period of suppression by competition with surrounding plants. Considering an ecosystem or ecological management approach, specific practices, such as bush control and vine clearing in wet habitats, should be more intensively conducted, especially at the beginning of the management operations.

• Korean Journal of Metals and Materials
• /
• v.49 no.8
• /
• pp.628-634
• /
• 2011

SA508 Gr.4N Ni-Cr-Mo low alloy steel, in which Ni and Cr contents are higher than in commercial SA508 Gr.3 Mn-Mo-Ni low alloy steels, may be a candidate reactor pressure vessel (RPV) material with higher strength and toughness from its tempered martensitic microstructure. The inner surface of the RPV is weld-cladded with stainless steels to prevent corrosion. The goal of this study is to evaluate the microstructural properties of the clad interface between Ni-Cr-Mo low alloy steel and stainless weldment, and the effects of post weld heat treatment (PWHT) on the properties. The properties of the clad interface were compared with those of commercial Mn-Mo-Ni low alloy steel. Multi-layer welding of model alloys with ER308L and ER309L stainless steel by the SAW method was performed, and then PWHT was conducted at $610^{\circ}C$ for 30 h. The microstructural changes of the clad interface were analyzed using OM, SEM and TEM, and micro-Vickers hardness tests were performed. Before PWHT, the heat affected zone (HAZ) showed higher hardness than base and weld metals due to formation of martensite after welding in both steels. In addition, the hardness of the HAZ in Ni-Cr-Mo low alloy steel was higher than that in Mn-Mo-Ni low alloy steel due to a comparatively high martensite fraction. The hardness of the HAZ decreased after PWHT in both steels, but the dark region was formed near the fusion line in which the hardness was locally high. In the case of Mn-Mo-Ni low alloy steel, formation of fine Cr-carbides in the weld region near the fusion line by diffusion of C from the base metal resulted in locally high hardness in the dark region. However, the precipitates of the region in the Ni-Cr-Mo low alloy steel were similar to that in the base metal, and the hardness in the region was not greatly different from that in the base metal.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.5
• /
• pp.732-739
• /
• 2021

Objective : Early successful reperfusion is associated with favorable outcomes in acute ischemic stroke (AIS). The purpose of this study was to achieve successful recanalization by a combined mechanical thrombectomy technique, the Aspiration-Retriever Technique for Stroke (ARTS), which is composed of a flexible large lumen distal access catheter and a retrievable stent as the first-line strategy of mechanical thrombectomy. Methods : We retrospectively reviewed 62 patients with AIS who underwent mechanical thrombectomy from 2018 to 2019 at our institute by a senior neurointerventionalist. Among them, patients who were treated using the ARTS technique with the soft torqueable catheter optimized for intracranial access (SOFIA^®; MicroVention-Terumo, Tustin, CA, USA) as the first-line treatment were included. Patients who had tandem occlusions or underlying intracranial artery stenosis were excluded. The angiographic and clinical outcomes were evaluated. The angiographic outcome was analyzed by the rate of successful recanalization, defined as a Thrombolysis in Cerebral Infarction score of 2b or 3 at the end of all procedures and the rate of successfully achieving the first pass effect (FPE), defined as complete recanalization with a single pass of the device. The clinical outcomes included the National Institutes of Health Stroke Scale (NIHSS) score, modified Rankin Scale (mRS), and mortality. Results : A total of 27 patients (mean age, 59.3 years) fulfilled the inclusion criteria. The successful recanalization rate was 96% (n=26) while the FPE rate was 41% (n=11). The mean post-procedural NIHSS change was -3.0. Thirteen patients (48%) showed good clinical outcomes after thrombectomy with the ARTS technique (mRS at 90 days ≤2). Postoperative complications occurred in seven of 25 patients : hemorrhagic transformation in six patients (22%) and distal embolization in one patient (4%). Mortality was 15% (n=4). Conclusion : Although the clinical outcomes using the ARTS technique with a flexible large lumen distal access catheter performed as the frontline thrombectomy in patients with AIS were not significantly superior than those of other studies, this study showed a high rate of successful endovascular recanalization which was comparable to that of other studies. Therefore, ARTS using the SOFIA^® catheter can be considered as the first choice of treatment for AIS due to large vessel occlusion.

• Corrosion Science and Technology
• /
• v.6 no.4
• /
• pp.147-153
• /
• 2007

This study sought to investigate the reaction of Co-binder containing tungsten with molten zinc. Four kinds of Co-W alloys (pure, 10%W, 20%W, 30%W) were prepared using the powder metallurgy method. The specimens were immersion-tested in molten pure zinc baths at $460^{\circ}C$. To evaluate the corrosion property in molten zinc, the weight loss of the specimen was measured after the immersion tests at different immersion times (10~300 min.). Co-10%W alloys, compared with pure cobalt, showed no effect of tungsten addition on the reaction rate in molten zinc. The relationship between the weight loss and the square root of immersion period represents a straight line in both pure cobalt and Co-10%W alloy. The Co-Zn reaction layer in Co- 1O%W alloy consists of $\gamma2$, $\gamma1$, $\gamma$ and ($\beta1$ phases. The rate of weight loss significantly increases and the weight loss behavior is not well accord with the linear relationship as the tungsten content in the Co-W alloy increases. The $\beta1$ layer was not formed on the Co-20%W alloy and neither was a stable Co-Zn intermetallic compound layer found on the Co-30%W alloy. The main cause of increase in reaction rate with increasing tungsten content is related with the instability of the Co-Zn reaction phases as seen on micro-structural analysis.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.4
• /
• pp.2361-2366
• /
• 2013

Diverse studies have shown that miR-155 is overexpressed in different tumor types. However, the precise molecular mechanism of the ectopic expression of miR-155 in breast cancer is still poorly understood. To further explore the role of miR-155 in breast tumorigenesis, we here assessed the influence of miR-155 antisense oligonucleotide (miR-155 ASO) on MDA-MB-157 cell viability and apoptosis in vitro. Furthermore, the effects of inhibitory effects of miR-155 on the growth of xenograft tumors in vivo were determined with performance of immunohistochemistry to detect expression of caspase-3, a pivotal apoptosis regulatory factor, in xenografts. Transfection efficiency detected by laser confocal microscope was higher than 80%. The level of miR-155 expression was significantly decreased (P<0.05) in the cells transfected with miR-155 ASO, compared with that in cells transfected with a negative control. After being transfected with miR-155 ASO, the viability of MDA-MB-157 cells was reduced greatly (P<0.05) and the number of apoptotic cells was increased significantly. Additionally, miR-155 ASO inhibited the growth of transplanted tumor in vivo and significantly increased the expression of caspase-3. Taken together, our study revealed that miR-155 ASO can induce cell apoptosis and inhibit cell proliferation in vitro. Moreover, miR-155 ASO could significantly repress tumor growth in vivo, presumably by inducing apoptosis via caspase-3 up-regulation. These findings provide experimental evidence for using miR-155 as a therapeutic target of breast carcinoma.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.1
• /
• pp.57-71
• /
• 2007

While a concept on biotop or the urgency of its classification systems have been under discussion recently, this study aims to examine outdoor biotop classification systems for environment-friendly community. To this end, the feasibility of creating a biotop in the community and application elements were generated and biotops were classified and categorized. Then, elements that can be applied in consideration of traditional Korean techniques were generated and biotop classification systems and specific components in residential areas were reviewed. As for the result of this study, based on a preliminary draft prepared through literature review, considerations for biotop classification systems were taken into account. Then, based on classification criteria for biotop formats, biotop functions and biotop types, a second-tier classification system was developed. Criteria for biotop formats included surfaces, lines and points while criteria for biotop functions were large cores, small bases, corridors, stepping stones and ecological islands. Criteria for habitat types were divided to include natural forest, developed green areas, lacustrine wetland, palustrine wetland, shrubs, grasslands, linear habitats, vacant plots and practical green areas, which were sub-categorized. As for the biotop classification system, macro-classification divided biotops into three types-space, line and point-based on biotop formats. Meso-classification had five groups and micro-classification had 21 groups based on habitat types. Future studies should focus on the ecological features of each biotop categories generated in this study and their creation and management techniques to find many practical methods to create, protect and manage outdoor biotop for environment-friendly community.

• Korean Journal of Materials Research
• /
• v.22 no.4
• /
• pp.169-173
• /
• 2012

Recently, various attempts to produce a heat sink made of Al 6xxx alloys have been carried out using die-casting. In order to apply die-casting, the Al alloys should be verified for die-soldering ability with die steel. It is generally well known that both Fe and Mn contents have effects on decreasing die soldering, especially with aluminum alloys containing substantial amounts of Si. However, die soldering has not been widely studied for the low Si aluminum (1.0~2.0wt%) alloys. Therefore, in this study, an investigation was performed to consider how the soldering phenomena were affected by Fe and Mn contents in low Si aluminum alloys. Each aluminum alloy was melted and held at $680^{\circ}C$. Then, STD61 substrate was dipped for 2 hr in the melt. The specimens, which were air cooled, were observed using a scanning electron microscope and were line analyzed by an electron probe micro analyzer. The SEM results of the dipping soldering test showed an Al-Fe inter-metallic layer in the microstructure. With increasing Fe content up to 0.35%, the Al-Fe inter-metallic layer became thicker. In Al-1.0%Si alloy, the additional content of Mn also increased the thickness of the inter-metallic layer compared to that in the alloy without Mn. In addition, EPMA analysis showed that Al-Fe inter-metallic compounds such as $Al_2Fe$, $Al_3Fe$, and $Al_5Fe_2$ formed in the die soldering layers.

• The Journal of Engineering Geology
• /
• v.4 no.1
• /
• pp.29-42
• /
• 1994

Discrimination studies between microearthquakes and underground explosions are carried out in the pure-continental path of north-south within the Korean Peninsula. The characteristic waveforms for explosions and microearthquakes are investigated in the light of observation and synthetic seismograms. The characteristic waveform generation is minnly a function of source mechanism and ray-path and former influences more strongly than the latter.A double-couple source mechanism for microeatthquakes and a single-couple(force) mechanism for explosions are presented in this study. It is found for very shallow events to have outstanding of $L_g$ waves in the transverse components that pass through the upper crust with period of 1 - 6 seconds and fundamental modes of Rayleigh waves, $R_g$ in the vertical component with period 8-12 seconds. Furthermore it is pointed out that the first arrival amplitudes of SH waves for explosions are always srnall regardless of azimuth of stations since there is non-existence of nodal lines for the explosion mechanism. Theoretical seismograms for explosions show the first motions of compression with short wavelengths as well as mostly fundamental modes of Rayleight waves, $R_g$ waves and $L_g$ waves, whereas those of micro-earthquakes give either compression or dilatation according to the ack azimuth epicenter to stations and poor or non $R_g$ waves and complicated $L_g$ waves, depending on the focal depth.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.5
• /
• pp.149-158
• /
• 2002

Recently, the minimum line width shows a tendency to decrease and the multi-level increases in semiconductor. Therefore, a planarization technique is needed and chemical mechanical polishing(CMP) is considered as one of the most suitable process. CMP accomplishes a high polishing performance and a global planarization of high quality. However there are several defects in CMF, such as micro-scratches, abrasive contaminations and non-uniformity of polished wafer edges. Wet etching process including spin-etching can eliminate the defects of CMP. It uses abrasive-free chemical solution instead of slurry. On this study, ILD(Interlayer-Dielectric) was removed by CMP and wet etching process using DHF(Diluted HF) in order to investigate the possibility of planrization by wet etching mechanism. In the thin film wafer, the results were evaluated from the viewpoint of material removal rate(MRR) and within wafer non-uniformity(WIWNU). And the pattern step heights were also compared for the purpose of planarity characterization of the patterned wafer. Moreover, Chemical polishing process which is the wet etching process with mechanical energy was introduced and evaluated for examining the characteristics of planarization.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.6
• /
• pp.757-766
• /
• 1985

Both in-process quality control and high reliability of the weld is one of the major concerns in applying friction welding to the economical and qualified mass-production. No reliable nondestructive monitoring method is available at present to determine the real-time evaluation of automatic production quality control for friction welding machine. This paper, so that, presents the experimental examinations and statistical quantitative analysis of the correlation between the initial cumulative counts of acoustic emission(AE) occurring during plastic deformation period of the welding and the tensile strength of the welded joints as well as the various welding variables, as a new approach which attempts finally to develop an on-line (or real-time) quality monitoring system and a program for the process of real-time friction welding quality evaluation by initial AE cumulative counts. As one of the important results, it was well confirmed that the initial AE cumulative counts were quantitatively and cubically correlated with reliability of 95% confidence level to the joint strength of the welds, bar-to-bar (SCM4 to SUM31, SCM4 to SUM24L) and that an AE technique using initial AE counts can be reliably applied to real-time strength evaluation of the welded joints, and that such a program of the system was well developed resulting in practical possibility of real-time quality control more than 100% joint efficiency showing good weld with no micro-structural defects.