• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.703-706
• /
• 2004

This paper deals with the various sealing conditions in a vacuum and the discharge characteristics. The MgO thin film is prepared by e-beam evaporation method. Sealing process was performed in a vacuum at panel temperature of 430 $^{\circ}C$. We find the cracks on the MgO film surface, which results in higher discharge voltage and lower luminous efficiency. The vacuum in-line sealing technology does not require additional annealing process but induces the MgO cracks because of the high temperature sealing cycle in a vacuum. Therefore we modify the vacuum in-line sealing cycle which the MgO cracks are not found and the good characteristics of plasma displays are found in higher sealing pressure at sealing temperature of 430 $^{\circ}C$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1523-1524
• /
• 2006

There arc several important issues in AC PDP researches such as cost reduction, reliability, and good image quality. The properties of MgO layer is thought to be one of the most important (actors that affects the panel reliability through the firing voltage variation. The MgO thin film mainly has (111), (200) and (220) crystal orientation. It is reported that (111)-oriented film helps decreasing the discharge voltage, and (200)-oriented film improves the misfiring on high temperature and the image sticking. In this study, we investigated the relations between the crystal orientation and e-beam evaporation process parameters such asdeposition rate, temperature of substrate, and distance between the target(MgO tablet) and the substrate.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2005년도 동계학술연구발표회 및 2차 아시안포럼
• /
• pp.154-155
• /
• 2005

Multi-layer film of $MgO/(FePt-B)_{50nm}/ MgO$ was deposited on Si(100) substrates by RF magnetron sputtering. The boron chips were uniformly placed oil tile FePt target. The boron content of thin film was found to be about 5, 10, 15, 25 and $33 at\%$ by using a CAMECA SX-51 wavelength dispersive spectroscopy (WDX). It is observed that X-ray diffraction patterns of FePt-B film by post-annealing exhibited a transformation from disordered fcc structure to ordered $Ll_0$ phase with fct structure from around $400^{\circ}C$. By adding B, annealing temperature for ordering is about $200^{\circ}C$ lower than that of pure FePt. This remarkable decrease of the annealing temperature is closely related to the high diffusivities of Fe and Pt associated with the defects caused by movements of B atoms. The maximum coercivity(Hc) for FePt films was found to be ${\~}$13 kOe after annealing at $600^{\circ}C$ for 1hr.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.211-211
• /
• 2003

PbTiO$_3$ 씨앗층을 이용하여 완화형 강유전체 Pb(Mg$_{1}$3/Ta$_{2}$3/)O$_3$ (PMT) 박막의 페로브스카이트 상안정화와 열처리 조건에 따른 미세구조변화, 이에 따른 전기적 특성 변화에 관하여 조사하였다. PbTiO$_3$ 박막을 스핀코팅법으로 3000 rpm에서 20초간(111) 방향으로 배향된 Pt / Ti / SiO$_2$/ Si 기판에 증착하여 안정화된 페로브스카이트 박막을 얻었다. 이렇게 제조된 PbTiO$_3$를 Buffer 층으로 사용하고 그 위에 Pb(Mg$_{1}$3/Ta$_{2}$3/)O$_3$를 박막을 Spin coating방법으로 증착한 후, 급속열처리 방법(RTA)으로 550- $650^{\circ}C$ 사이에서 열처리하였다. 제조된 박막의 열처리 온도에 따른 미세구조 변화와 결정성을 XRD, SEM, TEM으로 분석하였고 박막의 저온 강유전 특성을 RT66A를 이용하여 평가하였다. Pb(Mg$_{1}$3/Ta$_{2}$3/)O$_3$ 박막의 경우 씨앗층이 없는 경우에는 pyrochlore상이 주상이었지만 씨앗층을 사용한 경우 페로브스카이트 상이 주상임을 확인하였고 열처리 온도가 증가할수록 페로브스카이트상의 상대적 양이 증가함을 확인하였다. 미세구조와 상의 변화에 따른 전기적 특성 변화에 관하여 자세하게 논의할 것이다.

• 전자공학회논문지D
• /
• 제35D권4호
• /
• pp.93-100
• /
• 1998

Pyoelectric infrared detectors based on La-modified PbTiO3 (PLT) thin films have been fabricated by RF magnetron sputtering and micromachining technology. The detectors form Pb$_{1-x}$ La$_{x}$Ti$_{1-x}$ O$_{3}$ (x=0.05) thin film ferroelectric capacitors epitaxially grown by RF magnetron sputtering on Pt/MgO (100) substrate. The sputtered PLT thin film exhibits highly c-axis oriented crystal struture that no poling trealization for sensing applications is required. This is an essential factor to increase the yield for realization of an infrared image sensor. Micromachining technology is used to lower the thermal mass of the detector by giving maximum sensor efficiency. Polyimide is coated on top of the sensing elements to support the fragile structure and the backside of the MgO substrate is selectively eteched to reduce the heat loss. The sensing element exhibited a very high detectivity D* of 8.5*10$^{8}$ cm..root.Hz/W at room temperature and it is about 100 times higher than the case of micromachining technology is not used. a sensing system that detects the position as well as the existence of a human body is realized using the array sensor.sor.

• 한국세라믹학회지
• /
• 제43권1호
• /
• pp.62-67
• /
• 2006

Time-of-flight impact-collision ion scattering spectroscopy (TOF-ICISS) using 2 keV $He^+$ ion was applied to study the geometrical structure of the $BaTiO_3$ thin film which was grown on the MgO(100) surface. Hetero-epitaxial $BaTiO_3$ layers were formed on the MgO(100) surface by thermal evaporation of titanium followed first by oxidation at $400^{\circ}C$, subsequently by barium evaporation, and finally by annealing at $800^{\circ}C$. The atomic structure of $BaTiO_3$ layers was investigated by the scattering intensity variation of $He^+$ ions on TOF-ICISS and by the patterns of reflection high energy electron diffraction. The scattered ion intensity was measured along the <001> and <011> azimuth varying the incident angle. Our investigation revealed that perovskite structured $BaTiO_3$ layers were grown with a larger lattice parameter than that of the bulk phase on the MgO(100) surface.

• 한국진공학회지
• /
• 제8권1호
• /
• pp.70-74
• /
• 1999

Plasma Display Panel(PDP)에서 보호막 물질로 사용중인 MgO 특성을 개선하기 위하여 본 연구에서는 MgO-CaO 박막을 전자빔 증착법으로 제조하였다. MgO 최대 증착속도는 1025 $\AA$/min이었으며 CaO 첨가비가 증가함에 따라 증착속도는 감소하였고, XRD 패턴은 전체적으로 낮은 2$\theta$각 방향으로 이동하였다. MgO 대한 CaO의 최대 고용도는 0.13이다. 최적전압특성을 나타낸 조성은 Mg 47.1 at%, Ca 1.3 at%, O 51.6 at%이었으며 이때 방전개시전압은 176 V, 메모리마진은 0.5였으며 증착속도는 515$\AA$/min이었다.

• Bulletin of the Korean Chemical Society
• /
• 제31권12호
• /
• pp.3723-3729
• /
• 2010

We investigated the high-excitation voltage cathodoluminescence (CL) performance of blue light-emitting (ZnS:Ag,Al,Cl) and green light-emitting (ZnS:Cu,Al) phosphors coated with metal oxides ($SiO_2$, $Al_2O_3$, and MgO). Hydrolysis of the metal oxide precursors tetraethoxysilane, aluminum isopropoxide, and magnesium nitrate, with subsequent heat annealing at $400^{\circ}C$, produced $SiO_2$ nanoparticles, an $Al_2O_3$ thin film, and MgO scale-type film, respectively, on the surface of the phosphors. Effects of the phosphor surface coatings on CL intensities and aging behavior of the phosphors were assessed using an accelerating voltage of 12 kV. The MgO thick film coverage exhibited less reduction in initial CL intensity and was most effective in improving aging degradation. Phosphors treated with a low concentration of magnesium nitrate maintained their initial CL intensities without aging degradation for 2000 s. In contrast, the $SiO_2$ and the $Al_2O_3$ coverages were ineffective in improving aging degradation.

• 한국전기전자재료학회논문지
• /
• 제16권11호
• /
• pp.1035-1040
• /
• 2003

High $T_{c}$ superconducting B $i_2$S $r_2$CaC $u_2$ $O_{8+d}$ (BSCCO2212) films were prepared by a metallorganic decomposition (MOD) method. The metal organic solution of BSCCO2212 was spin-coated on MgO (100) substrates at 3000 rpm for 1 min. To achieve a high critical current density, we controlled heat-treatment conditions and atmosphere. The films were annealed at temperature 75$0^{\circ}C$ ∼ 80$0^{\circ}C$ in $O_2$ or air. We obtained c-axis orientated BSCCO thin films on MgO substrates. The annealed sample at 77$0^{\circ}C$ with $O_2$ showed the critical temperature about 77 K and critical current denstity of 1.19 ${\times}$ 10$^{5}$ A/$\textrm{cm}^2$ about 13 K.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.73-76
• /
• 2001

We deposited epitaxial $Ba_{0.6}Sr_{0.4}TiO_{3}(BST)$ films having thickness of 400 nm on MgO(001) substrates, where a 10 nm thick $Ba_{1-x}Sr_{x}TiO_{3}$ (x = 0.1 - 0.7) interlayer was inserted between BST and MgO to manipulate the stress of the BST films. Since the main difference of those epitaxial BST films was the lattice constant of the interlayers, we were very successful in controlling the stress of the BST films. BST films under small tensile stress showed larger dielectric constant than that without stress as well as those under compressive stress. Stress relaxation was investigated using epitaxial BST films with various thicknesses grown on different interlayers. For BST films grown on $Ba_{0.7}Sr_{0.3}TiO_{3}$ interlayers, the critical thickness was about 600 nm. On the other hand, the critical thickness of single-layer BST film was less than 100 nm.