• Membrane Journal
• /
• v.22 no.3
• /
• pp.171-177
• /
• 2012

Effect of humic acid (HA), photo-oxidation and adsorption with periodic $N_2$ back-flushing was investigated in hybrid process of ceramic ultrafiltration and photocatalyst for drinking water treatment. It was compared and investigated with the previous result at water back-flushing in viewpoints of membrane fouling resistance ($R_f$), permeate flux (J), and total permeate volume ($V_T$). As decreasing HA, $R_f$ decreased dramatically and J increased, and finally $V_T$ was the highest at HA 2 mg/L. As HA concentration increased from 2 to 10 mg/L, the membrane fouling resistance after 180 mins' operation ($R_{f,180}$) improved 0.8 times more than that of water back-flushing. Therefore, HA concentration should affect on the membrane fouling at $N_2$ back-flushing than water back-flushing. Turbidity treatment efficiencies were almost constant independent of HA concentration, but HA treatment efficiency was the maximum at HA 2 mg/L. This means that adsorption and photo-oxidation of photocatalyst beads could removed HA at HA 2 mg/L, but it was not enough at 4 mg/L. Beyond HA 6 mg/L, UF could effectively treat HA by thick cake layer on membrane surface and severe inner membrane fouling.

• Journal of Naturopathy
• /
• v.12 no.1
• /
• pp.7-15
• /
• 2023

Background: As a result of analyzing the components of wild Conyza canadensis, it contains physiologically active ingredients, so it is necessary to identify the compound. Purposes: It was to study the compound's molecular structure; a previous study showed that C. canadensis contains antioxidant substances. Methods: The ultrasonic pulverized lysate of C. canadensis stem and leaves was first extracted with 90% methanol and then five organic solvents. Next, the extracts was fractionated by HPLC, LC/MS chromatography, and NMR analyzers identified the molecular structure. Results: 100 g of dry C. canadensis was sonicated in 90% methanol and concentrated under reduced pressure to 11.96 g of a crude extract. Then, this crude was extracted with five types of solvents to obtain 123.8 mg of n-hexane, 448.2 mg of dichloromethane, 1047.7 mg of ethyl acetate (EA), 2563.8 mg of butanol, and 7.04 g of water. The EA extracts were fractionated by LC-MS and then re-fractionated to obtain F1 to F20. Next, the F15 was further fractionated to obtain nine fine fractions. Finally, the F17 fraction was re-fractionated to obtain ten fine fractions. As a result of LC-MS and NMR spectrometer analysis of the F15-7, the structure of this compound was confirmed as 3,5-dicaffeoylquinic acid. As a result of examining the structures of the F17-4 and F17-5 fractions, Quercetin-3-o-β-galactose was identified. In addition, the form of the F17-10 was confirmed to be 1,3,4-tri-caffeoylquinic acid. Conclusions: This study demonstrated that C. canadensis contained phenolic antioxidants, and its utilization may be expected.

• Development and Reproduction
• /
• v.25 no.3
• /
• pp.193-197
• /
• 2021

In previous reports, bisphenol A (BPA) exposure affects reproductive function in Drosophila melanogaster females. To test the maternal effect of BPA exposure on fly reproductive function, F0 mothers were exposed to 0, 0.1, 1, and 10 mg/L of BPA and the fecundity in F1 and F2 generations were checked. In this experiment, 1 and 10 mg/L BPA significantly decreased the fecundity of F1 females. Moreover, 0.1 and 1 mg/L BPA substantially reduced egg production in the F2 generation. These results suggested that maternal exposure to BPA at enviromentally relavant concnetrations reduces reproductive function in Drosophila melanogaster females and that this effect is transgenerational.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.12
• /
• pp.1017-1024
• /
• 2000

Effect of the microwave dielectric properties and the microstructure on a mole fraction(x=0.1~0.9) of (1-x)Mg$_2$SiO$_4$-xZnAl$_2$O$_4$ ceramics was investigated. When (1-x)Mg$_2$SiO$_4$-xZnAl$_2$O$_4$(x=0.1~0.9) ceramics were sintered at 130$0^{\circ}C$, 135$0^{\circ}C$ and 140$0^{\circ}C$ for 2hr, the microwave dielectric properties were obtained $\varepsilon$r=6.8~8.3, Q.f$_{0}$=36000~77600. On the other hand, the temperature coefficients of resonant frequency($\tau$$_{f}$) were obtained in the properties of -62ppm/$^{\circ}C$ to -49ppm/$^{\circ}C$. In order to adjust the temperature coefficient of resonant frequency($\tau$$_{f}$), CaTiO$_3$was added in (1-x)Mg$_2$SiO$_4$-xZnAl$_2$O$_4$ceramics. 0.7Mg$_2$SiO$_4$-0.2ZnAl$_2$O$_4$-0.1CaTiO$_3$ceramics sintered at 135$0^{\circ}C$ for 2hr showed the excellent microwave dielectric properties of $\varepsilon$r=7.7, Q.f$_{0}$=32000, and $\tau$$_{f}$=-7.9 ppm/$^{\circ}C$.EX>.>.EX>.

• Biomolecules & Therapeutics
• /
• v.3 no.1
• /
• pp.38-46
• /
• 1995

DA-125, a new anthracycline antitumor antibiotic, was administered at dose levels of 0, 0.04, 0.2 and 1.0 mg/kg/day intravenously to pregnant and subsequently delivered Sprague-Dawley rats from day 17 of gestation to day 21 of lactation. Effects of test agent on general toxicity of dams and growth, behaviour and mating performance of F1 offspring were examined. At 1 mg/kg, one out of the twentytwo dams showed difficult delivery, characterized by a stillbirth. Reduction in body weight, loss in food intake, and decrease in spleen weight were also observed in dams. In addition, the lower rates of successful performances in memory test (28.6%) and necrosis of tail end (9.5%) were seen in F1 offspring. At 0.04 and 0.2 mg/kg, no toxic effect on dams and F1 offspring was observed. There were no malformed Fl and F2 fetuses in all groups. The results indicate that the no effect dose levels(NOELs) of DA-125 are 0.2 mg/kg/day for dams and Fl offspring, and over 1 mg/kg/day for F2 fetuses.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.378-380
• /
• 2009

$MgF_2$ is a current material for the optical applications in the UV and deep UV range. Process variables for manufacturing the $MgF_2$ thin film were established in order to clarify optimum conditions for growth of the thin film depending upon process conditions, and then by changing a number of vapor deposition conditions and substrate temperature, Annealing conditions variously, structural and Optical characteristics were measured. Thereby, optimum process variables were derived. Nevertheless, modern applications still require improvement of the optical and structural quality of the deposited layers. In the present work, the composition and microstructure of $MgF_2$ single layers grown on slide glass substrate by Electro beam Evaporator(KV-660) processes, were analyzed and compared. The surface Substrate temperature having an effect on the quality of the thin film was changed from $200[^{\circ}C]$ to $350[^{\circ}C]$ at intervals of $50[^{\circ}C]$. and annealing temperature an effect on the thin film was changed from $200[^{\circ}C]$ to $400[^{\circ}C]$ at intervals of $50[^{\circ}C]$. Physical properties of the thin film were investigated at various fabrication conditions substrate temperature, annealing and temperature, annealing time by XRD, FE-SEM.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.1
• /
• pp.33-36
• /
• 2010

$MgF_2$ is a current material used for optical applications in the ultraviolet and deep ultraviolet range. Process variables for manufacturing $MgF_2$ thin film were established in order to clarify the optimum conditions for the growth of the thin film, dependant upon the process conditions, and then by changing a number of the vapor deposition conditions, substrate temperatures, and heat treatment conditions, the structural and optical characteristics were measured. Then, optimum process variables were thus derived. Nevertheless, modern applications still require improvement in the optical and structural quality of the deposited layers. In the present work, in order to understand the composition and microstructure of $MgF_2$, single layers grown on a slide glass substrate using an Electron beam Evaporator (KV-660), were analyzed and compared. The surface substrate temperature, having an effect on the quality of the thin film, was changed from $200^{\circ}C$ to $350^{\circ}C$ at intervals of $50^{\circ}C$. The heat treatment temperature, which also has an effect on the thin film, was changed from $200^{\circ}C$ to $400^{\circ}C$ at intervals of $50^{\circ}C$. The physical properties of the thin film were investigated at various fabrication conditions, such as the substrate temperature, the heat treatment temperature, and the heat treatment time, by X-ray diffraction, and field emission-scanning electron microscopy.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.71-74
• /
• 2022

For the process simplification in the fabrication of organic light emitting diode(OLED), top emission OLED (TEOLED) was fabricated without lithium fluoride(LiF) used as an electron injection layer (EIL). After co-deposition of Mg and Ag with a different process conditions, a cathode material adjacent to EIL was optimized when Mg and Ag have a ratio of 1:9 considering sheet resistance and transmittance. From the energy band diagram of TEOLED, band gap difference between Trisaluminium (Alq3) and Mg:Ag cathode show the difference of 0.4 eV according to the usage of LiF The fabricated TEOLED without LiF showed the improvement of 5.2 % and 2.7 % in the luminance and the current density comparing that with LiF. The results show there is no significant difference in OLED characteristics regardless of LIF layer in the TEOLED structures.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.5
• /
• pp.521-525
• /
• 2001

Screening tests of different fucoidan fractions from Sporophylls of Undazia pinnatifida, Laminaria religiosa, Hizikia fusiforme and Sagassum fulvellum revealed that the highest biosorptive Pb and Cd uptake fraction was Undaria finnatifida Fr-3.0 prepared by dissolving the precipitated complex (crude fucoidan and cetylpyridinum chloride) with 3.0 M $CaCl_2$ solution, The Pb and Cd uptake by Undaria finnatifida Fr-3.0 was quantitatively evaluated using sorption isotherms and Langmuir sorption model. The Pb and Cd uptake by Undaria finnatifida Fr-3.0 increased with increasing pH values at high equilibrium residual concentration. The highest experimentally observed Pb and Cd uptake value in the sorption isotherm for pH 5.5 were 94 mg/g (at $C_f=164\;mg/L$) and 64 mg/g (at $C_f=197\;mg/L$) respectively, and $q_{max}$ of Pb and Cd calculated by Langmuir sorption model were 178 mg/g and 122 mg/g, respectively. In the low equilibrium concentration range, up to 20 mg/L, the Pb uptake remained unchanged in the presence of Cd, but decreased at higher equilibrium concentration range.

• Journal of Radiation Protection and Research
• /
• v.22 no.3
• /
• pp.135-141
• /
• 1997

The study of anneal characteristics is important for TL dosimeter to reuse. To obtain the annealing condition of the recently developed, new TL dosimeter, LiF:Mg,Cu,Na,Si Teflon Tills in a disk type (diameter 4.5 mm, thickness about $90mg/cm^2$), we studied for pre-irradiation annealing, readout procedure and post-readout annealing, in order. The gamma irradiations were carried out with a $^{60}Co$, dose of 0.1 Gy. We have used the method that observe the variation of thermoluminescent(TL) intensity of these Teflon TLDs over repeated cycles by changing both anneal temperature and anneal time with the TLD reader and the oven. There is a 5% loss in sensitivity over the ten repeated readouts by the annealing condition:pre-irradiation annealing at $80^{\circ}C$ for one hour, readout to $280^{\circ}C$ and post-readout annealing at $270^{\circ}C$ for 20 seconds.