• Korean Journal of Biological Psychiatry
• /
• v.12 no.2
• /
• pp.151-158
• /
• 2005

Background:Clozapine is a unique atypical antipsychotic medication. It is considered to be superior, even amongst the newer agents, in treatment-resistant schizophrenia. However, de novo emergence or exacerbation of obsessive-compulsive(OC) symptoms during treatment with clozapine has been reported. We prospectively evaluated 19 cases which newly developed OC symptoms during clozapine treatment and discussed the treatment of OC symptoms induced by it. Methods:We recruited 19 patients(8 males, 11 females) with a DSM-IV diagnosis of schizophrenia and schizoaffective disorder who had developed OC symptoms during clozapine treatment. OC symptoms were assessed using the Padua-ICMA and YBOCS on a monthly basis over three months. Results:Eleven female and eight male patients were enrolled and the average age of patients was 32.8 years. At baseline, no patients showed OC symptoms. Moderate to severe OC symptoms appeared with mean daily dose of 298.68 mg of clozapine. There were no significant differences in improving OC symptoms between the clozapine dose reduction group and the OC treatment group. Conclusion:We noticed the possibility that the appearance of OC symptoms is connected with the effect of clozapine. The clozapine-induced OC symptoms were improved both by reducing clozapine daily doses, and by adding OC treatment drugs. With other atypical antipsychotics now available, to know and treat the side effects of clozapine would be of considerable value, offering clinical guidance in making a decision on treatment-resistant schizophrenia.

• Journal of the Korean Society of Radiology
• /
• v.12 no.5
• /
• pp.683-692
• /
• 2018

Mammography using mammography equipment is a method of examination that is being employed most widely to diagnose the early stages of breast cancer. Detecting or diagnosing a fibrous tissue, micro calcification, or mass in the breast is influenced by the quality management of mammography equipment considerably. Particularly in mammography, quality management refers to a behavior of figuring out and correcting all sorts of hindrance factors that can cause all the problems related to the equipment associated with the diminishment of diagnosed area due to the reduction of image quality in clinical imaging in advance and maintaining a consistent level of image quality and obtaining a proper image. Here, these researchers aim to summarize and report the general contents of quality management in mammography using mammography equipment.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.1
• /
• pp.81-86
• /
• 2005

The purpose of this study is to examine the antioxidant activity in the germ cells of the extract of Psoraleae fructus. The extract was studied for dipheny-picryl-hydrazyl (DPPH) radical scavenging activity, GC-1 cell viability by a modified MTT assay, the effects on $H_2O_2$-induced cytotoxicity by MTT assay and lipid perixidation by malondialdehyde (MDA) formation, respectively. The results showed that the extract scavenged DPPH radical with the IC50 being 0.427 mg/mL. The extract was dose-dependent in growth of GC-1 cell. $H_2O_2$-induced cytotoxicity (67.7 %) was blocked by the extract concentration- dependently. Furthermore, the extract also displayed a dose-dependent reduction of MDA formation on $H_2O_2$-induced lipid peroxidation. In conclusion, the extract of Psoraleae fructus has potent antioxidant activity.

• Plant Biotechnology Reports
• /
• v.3 no.1
• /
• pp.95-101
• /
• 2009

Tea leaves are major source of catechins—antioxidant flavonoids. Dihydroflavonol 4-reductase (DFR, EC 1.1.1.219) is one of the important enzymes that catalyzes the reduction of dihydroflavonols to leucoanthocyanins, a key ''late'' step in the biosynthesis of catechins. This manuscript reports characterization of DFR from tea (CsDFR) that comprised 1,413 bp full-length cDNA with ORF of 1,044 bp (115-1,158) and encoding a protein of 347 amino acids. Sequence comparison of CsDFR with earlier reported DFR sequences in a database indicated conservation of 69-87% among amino acid residues. In silico analysis revealed CsDFR to be a membrane-localized protein with a domain (between 16 and 218 amino acids) resembling the NAD-dependent epimerase/dehydratase family. The theoretical molecular weight and isoelectric point of the deduced amino sequence of CsDFR were 38.67 kDa and 6.22, respectively. Upon expression of CsDFR in E. coli, recombinant protein was found to be functional and showed specific activity of 42.85 nmol $min^{-1}$ mg $protein^{-1}$. Expression of CsDFR was maximum in younger rather than older leaves. Expression was down-regulated in response to drought stress and abscisic acid, unaffected by gibberellic acid treatment, but up-regulated in response to wounding, with concomitant modulation of catechins content. This is the first report of functionality of recombinant CsDFR and its expression in tea.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.7-21
• /
• 2000

This paper describes an overview of the thixoforming and thixomolding processes. Semi-solid metalworking (SSM), which is called the thixoforming process of aluminium materials, incorporates the elements of both casting and for the manufacture of near net shape parts. The SSM has some advantages such as net shape or near net shape manufacturing, the ability to form thin walls, excellent surface finish, tight tolerance, and excellent dimensional precision. The thixomolding process of Mg alloy (AZ9l) is a combination of two technologies both conventional die casting and plastic injection molding. The feed material used is a machined chip with a geometry of approximately 1 mm square and a length of 2~3 mm. The semi-solid forming (SSF) of high quality aluminium and magnesium parts will be established in the automotive and electronic industry, in the future. The hybrid method of casting/forging has been caused attention. This process uses a preformed material made by casting instead of the wrought material and finishes it by a single forging process. This process is expected to lower costs without sacrificing the mechanical and finishes it by a single forging process. The process is expected to lower costs without sacrificing the mechanical properties. The authors, intending that the casting/forging process contributes to a reduction in production cost of aluminum automotive parts in Korea, describes the feature of the casting/forging process, aluminum alloys suitable for the cast preform, microstructure and mechanical properties of the cast preform, application examples of cast/forging, and further study.

• Journal of environmental and Sanitary engineering
• /
• v.5 no.2
• /
• pp.95-102
• /
• 1990

Since the production of synthetic detergents in 1966, the demand of detergents increased rapidly during the past in Korea. Its production which was solely for donlestic consumption leaped from 402 tons in 1966 to 259387 tons in 1989. Practically all of these products were the anionic detergents primarily sodium salts of Alkyl Benzene Sulfonate(ABS). ABS persists for long periods in stream because of its resistance to triodegradation. Therefore synthetic detergents have been considered major contributors to water pollution. The detergents give a raise to be noted is foaming at sewage treatment plant and the drinking water contaminated by detergents have often been accompanying taste and odor. So the biodegradable Linear Alkyl benzene Sulfonate(LAS) has been adapted as the substituents for the Alkyl Benzene Sulfonate (ABS) since the 1980. However, the Inassive bubbles stemmed from use of synthetic detergents in the sewage treatment plant and the branch of tile Han River had been reported. Therefore, this investigation less undertaken so as to know the pollution of detergents in domestic sewage and the receiving river, and determine the biodegradation of synthetic detergents since ABS has been replaced by LAS in 1980. The study results on the pollution and biodegradation of synthetic detergents were as follows . 1. The major streams in Seoul were contaminated by synthetic detergents. The concentration of detergents were 2.48 mg/l of Anyangchon. 2. The biodegradation were determined by spontaneous settling and aeration. Since the LAS was substitute for ABS in 1980, detergents was more easy to biodegradable. The reduction ratio of Tanchon, Chungranchon, and Anyangchon were 15% , 11% and 16% by the settling and 76%, 77% and 82% by aerations for 5 days.

• Journal of Korean Society of Water and Wastewater
• /
• v.11 no.1
• /
• pp.33-41
• /
• 1997

An attempt was made to enhance anaerobic treatment efficiency by adopting the anaerobic sequencing batch reactor(ASBR) process at a thermophilic temperature. Operational characteristics of the ASBR process were studied using laboratory scale reactors and concentrated organic wastewater composed of soluble starch and essential nutrients. Effects of fill to react ratio (F/R) were examined in the Phase I experiment, where the equivalent hydraulic retention time(HRT) was maintained at 5 days with the influent COD of 10g/L. A continuous stirred tank reactor(CSTR) was operated in parallel as a reference. Treatment efficiency was higher for the ASBRs because of continuous accumulation of volatile suspended solids(VSS) compared to the CSTR. However, the rate of gas production and organic removal per unit VSS in the ASBRs was much lower than the CSTR. This was caused by reduced methane fermentation due to accumulation of volatile acids(VA), especially for the case of low F/R, during the fill period. When the F/R was high, maximum VA was low and the VA decreased in short period. Consequently, more stable operation was possible with higher F/R. Effects of hydraulic loading rate on the efficiency was studied in the Phase II experiment, where the organic loading rate was elevated to 3333mg/L-d with the F/R of 0.12. Reduction of organic removal along with rapid increase of VA was observed and the stability of reaction was seriously impaired, when the influent COD was doubled. However, operation of the ASBR was quite stable, when the hydraulic loading rate was doubled and a cycle time was adjusted to 12 hour. It is essential to avoid rapid accumulation of VA during the fill period in order to maintain operational stability of the ASBR.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.2
• /
• pp.151-160
• /
• 2014

Capacitive deionization(CDI) has many advantages over other desalination technologies due to its low energy consumption, less environmental pollution and relative low fouling potential. The objectives of this study are evaluate the performance of CDI which can be used for dissolved salts removal from sewage. To identify ion selectivity of nitrate and phosphate in multiionic solutions and adsorption/desorption performance related to applied potential, a series of laboratory scale experiments were conducted using a CDI unit cell with activated carbon electrodes. The CDI process was able to achieve more than 75 % TDS and $NO_3{^-}$, $NH_4{^+}$ removals, while phosphate removal was 60.8 % and is inversely related in initial TDS and $HCO_3{^-}$ concentration. In continuous operation, increasing the inner cell pressure and reduction of TDS removal ability were investigated which are caused by inorganic scaling and biofouling. However a relative mild cleaning solution(5 % of citric acid for calcium scaling and 500 mg/L of NaOCl for organic fouling) restored the electrochemical adsorption capacity of the CDI unit to its initial level.

• Journal of Bio-Environment Control
• /
• v.11 no.3
• /
• pp.133-138
• /
• 2002

This study was conducted to investigate the effece of NaCl concentrations on the growth, photosynthetic rate and mineral uptake of tomato, red pepper, and egg Plant in Pot culture. The growth such as plant height, plant fresh and dry weight, root fresh and dry weight and dried matter rate was decreased as NaCl concentrations were increased. Specially, the growth inhibition of tomato and egg plant was shown at over 40 mM NaCl, and that of red pepper at 20 mM NaCl. Yield of tomato and egg Plant was reduced at over 20 U NaCl, that of red pepper at over 10 mM NaCl. Yield reduction was affected by the number of fruit at low concentration and by mean weight and number of fruit at high concentration. Photosynthetic rate, water potential and stomatal conductance were decreased as NaCl concentrations were increased. The higher the concentration of NaCl, the lower the mineral uptake such as T-N, P, K, Ca and Mg, however, the higher the content of Na and Cl.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.366-374
• /
• 1996

The purpose of this study was to investigate whether D-myo-inositol-l,2,6-trisphosphate (PP56) can effectively antagonize vasoconstriction caused by neuropeptide Y in the dental pulp, and to understand involvement of neuropeptide Y in the regulation of microcirculation in the dental pulp with the aim of elucidating neurogenic inflammation. Experiments were performed on 7 cats anesthetised with sodium pentobarbital, and neuropeptide Y and a neuropeptide Y antagonist PP56 were injected close intra-arterially into the dental pulp. The probe of laser Doppler flowmeter was placed on the buccal surface of ipsilateral canine teeth to the drug administration and pulpal blood flow was measured. Intra-arterial injection of neuropeptide Y (1.3-$2.0\;{\mu}g$/kg) resulted in pulpal blood flow decrease of $37.73{\pm}5.73%$(mean${\pm}$SEM) (n=9). Intra-arterial injection of PP56(0.3 mg/kg) alone changed pulpal blood flow little by 1.03 % reduction. The effect of neuropeptide Y in the presence of PP56 resulted in significantly less decreases in pulpal blood flow ranging from $27.17{\pm}5.37$ to $16.63{\pm}3.48%$ from control as compared with neuropeptide Y alone(n = 13). In effect, PP56 attenuated pulpal blood flow caused by neuropeptide Y. Results of the present study have provided evidences that a non-peptide PP56 is capable of antagonizing vasoconstriction caused by neuropeptide Y in the feline dental pulp. In addition, they show functional evidences that neuropeptide Y plays an active role in modulating the microcirculation of the dental pulp.