• 제목/요약/키워드: Mg-doped

검색결과 343건 처리시간 0.029초

MgO doping 및 annealing이 AlN-Y2O3 세라믹스의 고온전기저항에 미치는 영향 (MgO doping and annealing effect on high temperature electrical resistivity of AlN-Y2O3 ceramics)

  • 유동수;이성민;황광택;김종영;심우영
    • 한국결정성장학회지
    • /
    • 제28권6호
    • /
    • pp.235-242
    • /
    • 2018
  • $Y_2O_3$를 소결조제로 사용한 질화알루미나(AlN)에 다양한 소결조건과 MgO의 도핑이 고온전기전도도의 특성에 대해 미치는 영향에 대해 연구하였다. MgO를 도핑 하였을 때, 2차상으로 스피넬과 페로브스카이트 상이 생성되었고, 이는 전기적 특성에 영향을 끼쳤다. 고온 임피던스를 분석한 결과 MgO의 도핑은 AlN 입내의 활성화 에너지와 전기전도도의 감소를 보이는 반면에, 입계의 경우에는 활성화 에너지와 전기전도도의 증가를 보였다. 이는 저항이 높은 비정질의 액상이 입계에 형성되거나, Mg의 석출에 의하여 쇼트키 장벽이 높아졌기 때문으로 예상된다. MgO가 도핑된 AlN을 어닐링 한 경우에는 어닐링 하지 않은 경우에 비하여, 활성화 에너지와 전기전도도가 더욱 증가하는 것을 볼 수 있었다. 이러한 결과는 $1500^{\circ}C$에서 어닐링을 통하여 미세구조분석에서 보이는 바와 같이 Mg 이온이 입계에서 입내로 확산된 때문으로 예상된다.

PLD법에 의한 Mg가 첨가된 CuCrO2 박막 성장 (Growth of Mg Doped CuCrO2 by Pulsed Laser Deposition)

  • 김세윤;이종철;최임식;이준형;김정주;허영우
    • 한국표면공학회지
    • /
    • 제42권2호
    • /
    • pp.68-72
    • /
    • 2009
  • We report on the growth of $CuCrO_2$ films using pulsed laser deposition and their structural and electrical transport properties. $CuCrO_2$ thin films were doped with 5 at% Mg for p-type properties. Epitaxial films of $CuCr_{0.95}Mg_{0.05}O_2$ were grown on c-plane sapphire substrates. The effects of growth temperature and oxygen pressure on film properties were investigated. The main phase of delafossite $CuCr_{0.95}Mg_{0.05}O_2$ was appeared above the growth temperature of $600^{\circ}C$. The thin film grown at $500^{\circ}C$ showed the highest conductivity, reaching 19.6 S/cm while higher growth temperatures over $500^{\circ}C$ led to lower conductivity; the thin film grown at $700^{\circ}C$ showed 0.02 S/cm.

졸-겔법으로 성장시킨 Mg0.05Zn0.95O 박막의 Indium 전구체의 종류에 따른 물성에 관한 연구 (Physical Properties of Mg0.05Zn0.95O Thin Films Grown by Sol-Gel Method According to Types of Indium Precursors)

  • 최효진;이민상;김홍승;안형수;장낙원
    • 한국전기전자재료학회논문지
    • /
    • 제34권4호
    • /
    • pp.256-261
    • /
    • 2021
  • Indium-doped Mg0.05Zn0.95O thin films were deposited on glass substrates by a sol-gel method. Three types of indium precursors such as indium chloride, indium acetate, and indium nitrate were used as doping sources. Physical properties of fabricated thin films were analyzed through XRD (x-ray diffraction), UV-vis spectrophotometer, Hall effect measurement, and EDS (energy dispersive x-ray spectroscopy). All In-doped thin films grown in this study exhibited a preferred orientation of (002) with over 80% transmittance. The results showed that the Mg0.05Zn0.95O thin film from indium chloride as the indium precursor has higher crystallinity and transmittance with lower resistivity when compared with those from other indium precursors.

Birefringence measurements of lmol%Mg:LiNbO3 with Noncollinea­rphase­matching cone

  • Lee, Jong-Soo;Rhee, Bum-Ku;Joo, Gi-Tae
    • Journal of the Optical Society of Korea
    • /
    • 제2권2호
    • /
    • pp.54-57
    • /
    • 1998
  • A noncollinear-phase-matching cone of second harmonic generation(SHG) was observed in a LiNbO3 crystal doped with l mol% MgO. Birefringence refractive indices can be accurately evaluated by analysing the temperature phase matching characteristic for SHG combined with the measurement of the half cone angle. The electro-optic coefficient can also be determined form the observed change of the half cone angle when a DC electric field is applied along the optic axis.

Study of the correlation between doped MgO workfunction and address delay

  • Choi, Il-Shin;Suh, Kwang-Jong;Yoo, Min-Sun;Heo, Eun-Gi
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2008년도 International Meeting on Information Display
    • /
    • pp.961-964
    • /
    • 2008
  • The MgO protective layer of PDP has a strong influence on address delay. The relation, however, is not clearly understood due to the difficulty of analysis which is caused by surface charging. This paper suggests a way to avoid the charging problem and shows the correlation between workfunction measured by UPS and address delay.

  • PDF