• Journal of Pharmaceutical Investigation
• /
• v.4 no.1_2
• /
• pp.19-24
• /
• 1974

The comparative studies were made on the analgesic antipyretic effects of aminopyrine used individually and combined with parasympathetic agents (atropine sulfate). The analgesic antipyretic effects were eximined by Writhing's method to the experimental groups(mouse), and the following effects were found : 1) The active intensity of aminopyrine by it's oral administration combined with atropine sulfate is as follows. Amiinopyrine 80 mg/kg combided with Atropine sulfate 0.005 mg/kg=Aminopyrine 100 mg/kg 2) The most active range of intensity of Atropine sulfate(adjuvant) by it's oral administration is as follows. Atropine sulfate $0.004{\sim}0.005\;mg/kg$.

• Korean Journal of Plant Tissue Culture
• /
• v.22 no.6
• /
• pp.329-334
• /
• 1995

Transformation system of rolC gene, dwarf gene in Lycium chinenese Mill. established by using system. Pin-punctured leaves induced numerous adventious buds in abaxial side when cultured on 3/2 MS medium containing 2.0 mg/L zeatin. Survival rate and shoot regeneration frequency of leaf explants decreased as kanamycin sulfate level increased. Shoot buds were not regenerated on 3/2 MS medium containing 10 mg/L kanamycin sulfate and 2.0 mg/L zeaein. Of the level tested, 10 mg/L of kanamycin sulfate was optimum in selection of kanamycin sulfate resistant plant. Co-culture time of bacteria and leaf explants was affected at the frequency of shoot regeneration and survival of leaf explants. Leaf explants co-cultivated during above 48hr severely decreased survival rate and shooting rate. Best result on survival rate and shooting rate were obtained when exposed for 24 h. 80 explants of 105 leaf explants survived on 3/2 MS medium containing 2.0 mg/L zeatin and 10 mg/L kanamycin sulfate, and 15 shoots was regenerated on the same medium. To select kanamycin sulfate resistant plant, regenerate as cultured on 3/2 MS medium containing 10 mg/L kanamycin sulfate, and obtained 5 kanamycin resistant plants. Southern blot analysis conformed that the rolC gene was incorporated into the genomic DNA of kanamycin resistant plants.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.2
• /
• pp.313-321
• /
• 2000

This research is to remove heavy metals from AMD(Acid Mine Drainage) using AFMR(Anaerobic Floating Media Reactor) process. Two AFMR were operated at HRT(hydraulic retention time) of 3 days. COD/sulfate ratio from 0.3 to 0.8, temperature from $30^{\circ}C$ to $35^{\circ}C$, and alkalinity of 1.000mg/l(as $CaCO_3$). At COD/sulfate($SO{_4}^{2-}$) ratio of 0.5 and temperature of $35^{\circ}C$, the ratio of reduced sulfate($SO{_4}^{2-}$)/removed COD(mg/mg) kept about 1 and the reactor achieved 99.99% of Cr, Pb anee Fe, 98% of Cd, and 90% of Mn removal efficiencies, respectively. Decreasing temperature to $30^{\circ}C$ increased the ratio of reduced sulfate($SO{_4}^{2-}$)/removed COD(mg/mg) to 1.37. Amount of sulfate reduction maximized at the temperature of $30^{\circ}C$ and the COD/sulfate ratio of 0.4 in the influent and then removal efficiencies of heavy metals were 99.99% of Fe, 99.99% of Pb, 99,99% of Cr, 97.3% of Mn, 99.9% of Zn, 99.9% of Cd and 99.9% of Cu.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.10
• /
• pp.1591-1597
• /
• 2007

The production of carotenoids, lipid content, and fatty acid composition were all studied in a strain of Sporobolomyces ruberrimus when using different concentrations of technical glycerol as the carbon source and ammonium sulfate as the nitrogen source. The total lipids represented an average of 13% of the dry weight, and the maximum lipids were obtained when using 65.5 g/l technical glycerol (133.63 mg/g). The optimal conditions for fatty acid production were at $27^{\circ}C$ using 20 g of ammonium sulfate and a pH range from 6 to 7, which produced a fatty acid yield of $32.5{\pm}1\;mg/g$, including $1.27{\pm}0.15\;mg$ of linolenic acid (LNA), $7.50{\pm}0.45\;mg$ of linoleic acid (LLA), $5.50{\pm}0.35\;mg$ of palmitic acid (PA), $0.60{\pm}0.03\;mg$ of palmitoleic acid (PAL), $1.28{\pm}0.11\;mg$ of stearic acid (SA), $9.09{\pm}0.22\;mg$ of oleic acid, $2.50{\pm}0.10\;mg$ of erucic acid (EA), and $4.25{\pm}0.20\;mg$ of lignoceric acid (LCA), where the palmitic, oleic, and linoleic acids combined formed about 37% of the total fatty acids. The concentration of total carotenoids was 2.80 mg/g when using 20 g of ammonium sulfate, and consisted of torularhodin (2.70 mg/g) and $\beta$-carotene (0.10 mg/g), at $23^{\circ}C$ and pH 6. However, the highest amount with the maximum specific growth rate was obtained (${\mu}_{max}=0.096\;h^{-1}$) with an ammonium sulfate concentration of 30 g/l.

• Journal of Environmental Health Sciences
• /
• v.19 no.3
• /
• pp.22-28
• /
• 1993

In order to investigate the hygienic chemical conditions of farm waters used as the potable and cleaning water for cow, we examined the pH, turbidity, KMnO$_4$ consumption, total hardness, chlorine, sulfate, NH$_3$-N, NO$_3$-N, lead, maganese, copper, zinc, fluoride and chrome for 78 farm waters around Kyunggi Province. Of 78 farm waters tested, average pH was 6.70+_0.06, turbidity 0.724 $\pm$ 0.081, KMnO$_4$ consumption 4.200 $\pm$ 0.256 mg/l, total hardness 107.46 $\pm$ 6.90 mg/l, NH$_3$-N 0.043 $\pm$ 0.037 mg/l, NO$_3$-N 8.096 $\pm$ 0.652 mg/l, chlorine 21.414 $\pm$ 2.187 mg/l, sulfate 12.737 $\pm$ 1.511 mg/l, lead 0.076 $\pm$ 0.001 mg/l, manganese 0.029 $\pm$ 0.004 mg/l, copper 0.018 $\pm$ 0.002 mg/l, zinc 0.055 $\pm$ 0.005 mg/l, chrome 0.048 $\pm$ 0.002 mg/l and fluorine 0.011 $\pm$ 0.001 mg/l. According to the geological characteristics, the concentrations of total hardness, NO$_3$-N, pH and chlorine in farm waters of Hwasung gun were higher than those in Yangpyung and Kwangju gun. In hygienic chemical items tested, there were high significanc among NO$_3$-N, total hardness, sulfate and chlorine. KMnO$_4$ consumption was significant with NH$_3$-N, sulfate and pH. But in heavy metals, there were significance between lead and copper, copper and chrome, and copper and fluorine.

• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.445-455
• /
• 2009

Microbiological sulfate reduction is the transformation of sulfate to sulfide catalyzed by the activity of sulfate-reducing bacteria using sulfate as an electron acceptor. Low solubility of metal sulfides leads to precipitation of the sulfides in solution. The effects of microbiological sulfate reduction on in-situ precipitation of arsenic and copper were investigated for the heavy metal-contaminated soil around the Songcheon Au-Ag mine site. Total concentrations of As, Cu, and Pb were 1,311 mg/kg, 146 mg/kg, and 294 mg/kg, respectively, after aqua regia digestion. In batch-type experiments, indigenous sulfate-reducing bacteria rapidly decreased sulfate concentration and redox potential and led to substantial removal of dissolved As and Cu from solution. Optimal concentrations of carbon source and sulfate for effective microbial sulfate reduction were 0.2~0.5% (w/v) and 100~200 mg/L, respectively. More than 98% of injected As and Cu were removed in the effluents from both microbial and chemical columns designed for metal sulfides to be precipitated. However, after the injection of oxygen-rich solution, the microbial column showed the enhanced long-term stability of in-situ precipitated metals when compared with the chemical column which showed immediate increase in dissolved As and Cu due to oxidative dissolution of the sulfides. Black precipitates formed in the microbial column during the experiments and were identified as iron sulfide and copper sulfide. Arsenic was observed to be adsorbed on surface of iron sulfide precipitate.

• Textile Coloration and Finishing
• /
• v.12 no.2
• /
• pp.96-102
• /
• 2000

For the effective treatment of dyeing-complex wastewater, the most effective chemical coagulation method was studied. For the chemical coagulation of dyeing-complex wastewater, polyferric sulfate, $4Al_2(SO_4)_3$, PAC, ferrous sulfate, ferric sulfate, $FeCl_2$ and lime were used. It was investigated that polyferric sulfate was the most efficient coagulant. The optimal conditions and results for polyferric sulfate include the followings. When initial $COD_{Mn}$ concentration was 600mg/L, the optimal initial pH, dosage of coagulant, dosage of lime and PAA for $COD_{Mn}$ removal efficiency were 5, 1,200mg/L, 500mg/L and lmg/L, respectively. The optimal dosage of polyferric sulfate was increased proportionally to the influent $COD_{Mn}$ concentration.

• Journal of the Korea Concrete Institute
• /
• v.29 no.4
• /
• pp.415-424
• /
• 2017

The purpose of this study is to investigate the effect of sulfate (${SO_4}^{2-}$) and magnesium ($Mg^{2+}$) ions on sulfate resistance of Alkali-activated materials using Fly ash and Ground granulated blast furnace slag (GGBFS). In this research, 30%, 50% and 100% of GGBFS was replaced by sodium silicate modules ($Ms(SiO_2/Na_2O)$, molar ratio, 1.0, 1.5 and 2.0). In order to investigate the effects of $Mg^{2+}$ and ${SO_4}^{2-}$, compression strength, weight change, lengh expansion of the samples were measured in 10% sodium sulfate ($Na_2SO_4$), 10%, 5% and 2.5% magnesium sulfate ($MgSO_4$), 10% magnesium nitrate ($Mg(NO_3)_2$), 10% [magnesium chloride ($MgCl_2$) + sodium sulfate ($Na_2SO_4$)] and 10% [magnesium nitrate $(Mg(NO_3)_2$ + sodium sulfate ($Na_2SO_4$)] solution, respectively and X-ray diffraction analysis was conducted after each experiment. As a result, when $Mg^{2+}$ and ${SO_4}^{2-}$ coexist, degradation of compressive strength and expansion of the sample were caused by sulfate erosion. It was found that the reaction of $Mg^{2+}$ with Calcium Silicate Hydrate (C-S-H) occurred and $Ca^{2+}$ was produced. Then the Gypsum ($CaSO_4{\cdot}2H_2O$) was formed due to reaction between $Ca^{2+}$ and ${SO_4}^{2-}$, and also Magnesium hydroxide ($Mg(OH)_2$, Brucite) was produced by the reaction between $Mg^{2+}$ and $OH^-$.

• The Korean Journal of Food And Nutrition
• /
• v.23 no.4
• /
• pp.435-439
• /
• 2010

The aim of this study was to evaluate the anti-inlfammatory effects of Glycyrrhiza glabra Linne extract on ulcerative colitis induced by 3% dextran sulfate sodium in mice. The experimental animals were divided into six groups: control(normal), DSS-induced colitis(control), 1 mg/kg, 10 mg/kg, and 100 mg/kg of Glycyrrhiza glabra Linne extract, and 150 mg/kg 5-aminosalicylic acid(5-ASA)(positive control). We evaluated the pathological disease activity index(DAI), change in weight, colon mucosa damage and myeloperoxidase(MPO) in colon mucosa. Treatment with 10 mg/kg and 100 mg/kg of Glycyrrhiza glabra Linne extract led to significant loss of body weight, the decrease of MPO activity and clinical symptoms such as DAI and histological change. In particular, 100 mg/kg Glycyrrhiza glabra Linne extract led to markedly greater improvement than 150 mg/kg 5-ASA treatment. These results suggest that Glycyrrhiza glabra mediated anti-inflammatory action on colorectal sites may be a useful therapeutic approach to ulcerative colitis.

• Journal of Environmental Impact Assessment
• /
• v.32 no.2
• /
• pp.123-133
• /
• 2023

Wastewater generated in the secondary battery production process contains lithium and high-concentration sulfate. Recently, as demand as demand for high-Ni precursors with high-energy density has surged, nickel emission is also a concern. Lithium and sulfate are not included in the current water pollutant discharge standard, so if they are not properly processed and discharged, the negative effect on future environment may be great. Therefore, in this study, the ecotoxicity of lithium, nickel, and sulfate, which are potential contaminants that can be discharged from the secondary battery production process, was evaluated using water flea (Daphnia magna) and luminescent bacteria (Aliivibrio fischeri). As a result of the ecotoxicity test, 24-hour and 48-hour D. magna EC₅₀ values of lithium were 18.2mg/L and 14.5mg/L, nickel EC50 values were 7.2mg/L and 5.4mg/L, and sulfate EC₅₀ values were 4,605.5mg/L and 4,345.0mg/L, respectively. In the case of D. magna, it was found that there was a difference in ecotoxicity according to the contaminants and exposure time (24 hours, 48 hours). Comparing the EC₅₀ of D. magna for lithium, nickel, and sulfate, the EC₅₀ of nickel at 24h and 48h was 39.6-37.2% compared to lithium and 0.1-0.2% compared to sulfate, which was the most toxic among the three substances. The difference appeared to be at a similarlevelregardless of the exposure time. The EC₅₀ of sulfate was 253.0-299.7% and 639.5-804.6%, respectively, compared to lithium and nickel, showing the least toxicity among the three substances. The 30-minute EC₅₀ values of luminescent bacteria forlithium, nickel, and sulfate were 2,755.8mg/L, 7.4mg/L, and 66,047.3mg/L,respectively. Unlike nickel, it was confirmed that there was a difference in sensitivity between D. magna and A. fischeri bacteria to lithium and sulfate. Studies on the mixture toxicity of these substances are needed.