• Title/Summary/Keyword: Mg particles

Search Result 736, Processing Time 0.025 seconds

Mechanical and durability properties of fly ash and slag based geopolymer concrete

  • Kurtoglu, Ahmet Emin;Alzeebaree, Radhwan;Aljumaili, Omar;Nis, Anil;Gulsan, Mehmet Eren;Humur, Ghassan;Cevik, Abdulkadir
    • Advances in concrete construction
    • /
    • v.6 no.4
    • /
    • pp.345-362
    • /
    • 2018
  • In this paper, mechanical and short-term durability properties of fly ash and slag based geopolymer concretes (FAGPC-SGPC) were investigated. The alkaline solution was prepared with a mixture of sodium silicate solution ($Na_2SiO_3$) and sodium hydroxide solution (NaOH) for geopolymer concretes. Ordinary Portland Cement (OPC) concrete was also produced for comparison. Main objective of the study was to examine the usability of geopolymer concretes instead of the ordinary Portland cement concrete for structural use. In addition to this, this study was aimed to make a contribution to standardization process of the geopolymer concretes in the construction industry. For this purpose; SGPC, FAGPC and OPC specimens were exposed to sulfuric acid ($H_2SO_4$), magnesium sulfate ($MgSO_4$) and sea water (NaCl) solutions with concentrations of 5%, 5% and 3.5%, respectively. Visual inspection and weight change of the specimens were evaluated in terms of durability aspects. For the mechanical aspects; compression, splitting tensile and flexural strength tests were conducted before and after the chemical attacks to investigate the residual mechanical strengths of geopolymer concretes under chemical attacks. Results indicated that SGPC (100% slag) is stronger and durable than the FAGPC due to more stable and strong cross-linked alumina-silicate polymer structure. In addition, FAGPC specimens (100% fly ash) showed better durability resistance than the OPC specimens. However, FAGPC specimens (100% fly ash) demonstrated lower mechanical performance as compared to OPC specimens due to low reactivity of fly ash particles, low amount of calcium and more porous structure. Among the chemical environments, sulfuric acid ($H_2SO_4$) was most dangerous environment for all concrete types.

Deposition flux of dioxin-like polychlorinated biphenyls(DLPCBs) in urban environment of Busan (도심 지역의 다이옥신류 폴리염화비페닐류의 침적 플럭스)

  • Mun, Hyo-Bang;Lee, Su-Jeong;Choe, Hui-Gu;Ok, Gon
    • Journal of Environmental Science International
    • /
    • v.13 no.5
    • /
    • pp.469-478
    • /
    • 2004
  • Atmospheric bulk (wet and dry) samples were monthly collected in an urban environment (Daeyeon-dong) of Busan over a year, to assess the deposition flux and seasonality of dioxin-like polychlorinated biphenyls (DLPCBs) using stainless steel pots. Deposition fluxes of DLPCBs in bulk samples were determined using high resolution gas chromatography coupled to high resolution mass spectrometry (HRGC/HRMS). Particle deposition fluxes in the urban environment varied from 23 to 98 $mg^2$/year (mean 41 $gm^2$/year). DLPCB deposition fluxes in atmospheric bulk samples ranged from 0.09 to 0.77 ng-$TEQ/m^2$/year (mean 0.35 ng-$TEQ/m^2$/year). Seasonal atmospheric deposition fluxes of DLPCBs were high in winter and low in summer. Atmospheric deposition fluxes of particles and DLPCBs in this study were comparable to or slightly lower values than those of different locations in the world. Monthly DLPCB profiles in deposition bulk samples were similar over a year. Non-ortho PCBs were higher contributions to the total DLPCBs fluxes than mono-ortho PCBs. In particular, PCB 126 had the highest concentrartion (>75%) in all deposition samples, followed by PCB 169 and PCB 156. A highly positive correlation was found among the deposition fluxes of DLPCB species, suggesting the possibility of that the DLPCB contamination originated from one source. The deposition fluxes of DLPCBs were not significantly correlated with temperature and the amount of precipitation even though the summer season with the highest temperature and the largest amount of precipitation showed the lowest DLPCB deposition flux.

Development of Membrane Strip Assay System for Lipoprotein Cholesterol Based on Liquid-Phase Enzyme Reactions (액상 효소반응을 이용한 Membrane Strip 형 Cholesterol 측정시스템의 개발)

  • 신인수;목락선;장미라;백세환
    • KSBB Journal
    • /
    • v.13 no.5
    • /
    • pp.577-584
    • /
    • 1998
  • A sensitive membrane strip assay for plasma lipoprotein cholesterol that can be performed without handling reagents has been investigated. We previously developed an assay system with immobilized enzymes (cholesterol esterase and cholesterol oxidase) on the surfaces of nitrocellulose membrane(1). In such a case, the amount of enzymes present on the membrane was limited by its surface area and, thus, the detection capability was relatively poor (> 50 mg/dL cholesterol). To overcome this problem, we devised a new system with non-immobilized enzymes by placing them within interstitial spaces of a celullose membrane pad in a dry state. Upon contact with sample medium, the enzymes were immediately dissolved and participated in the reactions with cholesterol in a liquid phase. We constructed a user-friendly system consisting of four membrane pads fro sample application, cholesterol decomposition, color development as signal, and medium absorption to invoke a continuous flow (sequential location from the bottom). A sample containing lipoproteins was added into the application pad by capillary action and transferred to the next pad for decomposition. The decomposition pad (namely, enzyme pad) contained a detergent (sodium cholate) for the destruction of lipoprotein particles, the two enzymes for cholesterol decomposition, and a chromogen (3,3'-diaminobenzidine). As a consequence of the enzyme reactions, hydrogen peroxide was produced, and then reacted in the presence of the chromogen with horseradish peroxidase immobilized on the signal generation pad. Finally, a colorimetric signal directly proportional to the cholesterol concentration was produced. The detection limit determined from this system under optimal conditions was at least 2 times lower than of the enzyme-immobilized system.

  • PDF

Characteristics of sawdust, wood shavings and their mixture from different pine species as bedding materials for Hanwoo cattle

  • Ahn, Gyu Chul;Jang, Sun Sik;Lee, Kang Yeon;Baek, Youl Chang;Oh, Young Kyoon;Park, Keun Kyu
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.33 no.5
    • /
    • pp.856-865
    • /
    • 2020
  • Objective: This study was conducted to evaluate the physicochemical properties and changes in moisture concentrations of bedding materials under the conditions of rearing Korean Hanwoo cows. Methods: Two experiments were conducted to investigate the physicochemical characteristics (Exp. I) and usefulness as beddings for rearing cattle (Exp. II) by the type of beddings such as sawdust (SD), wood shavings (WS) and sawdust+wood shavings (S+W; 1:1 in volume), and the species of pine trees from different countries of origins (China, Pinus armandii, AR; Vietnam, Pinus kesiya, KE; USA, Pinus rigida, RI). Results: In Exp. I, SD-AR showed the largest proportion (78.3%) of fine particles (250 ㎛+below 250 ㎛) and the highest bulk density (208 kg/㎥) among treatments (p<0.05). The water absorption capacity at 24 h of both S+W-RI (713%) and -KE (701%) was the highest among treatments (p<0.05) and higher than those of SD or WS alone within each species of pine tree (p<0.05). Moisture evaporation rates (%) at 12 h were ranged from 52.3 to 60.8 for SD, 69.9 to 74.4 for WS, and 72.3 to 73.5 for S+W. Total amounts (mg/㎡) of ammonia emissions were the lowest (p<0.05) in KE species among the pine species within each type of bedding material, having higher ability of ammonia absorption. In Exp II, KE species in both side A and B had lower moisture concentrations (%) than other species. Regardless of types of beddings except SD-AR, moisture concentrations of beddings within a pen were higher (p<0.01) at side A than B. Conclusion: The KE species has better physical characteristics than other beddings and more useful for rearing Hanwoo cattle than other beddings, probably caused by the differences in the method and degree of wood processing rather than the species.

Toxicity Response of Biosensor Using Sulfur-Oxidizing Bacteria to Various Nitrogenous Compounds (다양한 질소화합물에 대한 황산화미생물 바이오센서의 응답 특성)

  • Hwang, Ji-Hoon;Kang, Woo-Chang;Shin, Beom-Soo;Chae, Kyu-Jung;Oh, Sang-Eun
    • Korean Journal of Environmental Agriculture
    • /
    • v.33 no.4
    • /
    • pp.314-320
    • /
    • 2014
  • BACKGROUND: Run off from agricultural sites contaminates water bodies with nitrogen which is toxic and causes eutrophication when excessively accumulated. Hence, the interest in monitoring nitrogen toxicity in aquatic environment has been continuously increasing. METHODS AND RESULTS: To detect a real time toxicity of various nitrogen compounds, we applied biomonitoring method (biosensor) based on sulfur-oxidizing bacteria (SOB). The toxicity biomonitoring test was conducted in semi-continuous mode in a reactor filled with sulfur particles (2~4 mm diameter) under aerobic condition. Relative toxicity was simply determined by measuring the change in electrical conductivity (EC). Various nitrogenous compounds at different concentrations were evaluated as a potential toxic substance. Nitrite was found to be very toxic to SOB with a 90% inhibition even when the concentration as low as 3 mg/L. However, nitrate and ammonia have any inhibitory effect on SOB's activity. CONCLUSION: The biosensor based on SOB responded sensitively to nitrite even at substantially low concentrations. Therefore, it can be used as a reliable biological alarm system for rapid detection of contaminants due to its simplicity and sensitive nature.

Ultrastructural Studies of Effect of Monosodium Glutamate on the Epiphyseal Plate of Femur in Young Chicken (Monosodium Glutamate가 초생추 대퇴골 근위골단에 미치는 영향에 관한 투과 및 주사전자현미경적 연구)

  • Yang, Hong-Hyun;Lee, Heung-Shik;Lee, In-Se;Kim, Jin-Sang
    • Applied Microscopy
    • /
    • v.20 no.1
    • /
    • pp.90-104
    • /
    • 1990
  • This study was carried out to investigate the ultrastructural changes of the proximal epiphyseal plate of the femur in young chickens that had been treated with monosodium glutamate(MSG). Eighty 1-day old broiler chickens(Hubbard strain) were divided into control and experimental groups. The experimental group received daily administration of MSG(3mg/g of body weight in 0.75% saline) per orally for 1, 3, 6, 9, 12, 15, 18 and 21 days, and were sacrificed with exanguination. The control group received an equal volume of 0.75% saline. For the transmission electron microscopy, the prehypertrophic cartilage zone of epiphyseal plate was cleaved, fixed with 2% glutaraldehyde(containing 0.2% ruthenium red), postfixed with 1 % osmium tetroxide, embedded in Epon 812, and stained with uranyl acetate and lead citrate. For the scanning electron microscopy, the calcified zone of epiphyseal plate was cleaved and coated with gold palladium. The results obtained were as follows; 1. On transmission electron microscopic examination, the sacculation decreased from 12 day to 21 day MSG administrated groups, and the vesiculation decreased in 18 and 21 day MSG administrated groups in rough endoplasmic reticulum of chondrocytes in prehypertrophic cartilage zone. The ruthenium red binding particles in pericellular rim, territorial matrix and interterritorial matrix increased from 9 day to 21 day MSG administrated groups, but the crystalloid materials decreased. 2. On scanning electron microscopic examination, the trabecular formation and calcospherites of calcification zone decreased in 18 and 21 day MSG administrated groups. The resorption cavities widened from 15 day to 21 day MSG administrated groups.

  • PDF

Effect of Diazinon on the Cytoplasmic Organelles of Hepatocytes in Albino Mice (Diazinon이 Mouse의 간세포내 미세구조에 미치는 영향)

  • Kim, Y.H.;Chung, H.S.;Lee, K.S.
    • Applied Microscopy
    • /
    • v.14 no.2
    • /
    • pp.66-80
    • /
    • 1984
  • The organic phosphorus compounds have been widely used as an insecticide, since toxicity of these compounds is especially drastic to the insects than to men and other mammals. The organic phosphates are rapidly hydrolized and hence have little cumulative and ecologic effects. However, due to their acute toxic effects organophosphate have recorded rather high fatalities in men and domestic animals. The organic phosphorus compounds are powerful inhibitors to the carboxylic esterase enzymes such as acetylcholinesterase and pseudocholinesterase. As a result of firm binding characteristics of phosphate radicals to the active sites of enzyme, the activities of these enzymes are inhibited by the organophosphates. The organophosphates such as diazinon is easily observed from skin, gastrointestinal tract, conjunctivas and respiratory tract, and it is converted to more toxic form during metabolism in the liver The present study was carried out in order to investigate the hepatotoxicity of diazinon by observing the changes in the ultrastructure of cytoplasmic organelles of hepatic cells in albino mice. The animals were killed at 6, 12 and 24 hours after administration of 25mg/kg diazinon. The piece of hepatic tissue obtained from each animal was ultrathinly sectioned. The specimens stained by uranyl acetate and lead citrate double contrast methods were observed with JEM model 100B electron microscope. The results obtained were as follows: 1) A prominent dilatation and sacculation of the cisternae of rough endoplasmic reticulum associated with detachment of membrane bound-ribosomes, and disaggregation of the free ribosomes were recognized. 2) The hypertrophy of the smooth endoplasmic reticulum associated with depletion of the glycogen particles was observed. 3) The atrophy of cisternae of Golgi complex was observed. 4) A large number of secondary lysosomes (autophagic vacuoles and residual bodies) were formed. Consequently it is suggested that diazinon would induce disorganization of the cytoplasmic organelles of hepatocytes in albino mice.

  • PDF

The Effect of Sulfur/Limestone Ratio on the Efficiency of Sulfur-Utilizing Denitrification (황/석회석 충전비가 황-이용 탈질효율에 미치는 영향)

  • Shin, Hyung-Soon;Lee, Il-Su;Hwang, Yong-Yoo;Bae, Jae-Ho
    • Journal of Korean Society of Water and Wastewater
    • /
    • v.14 no.3
    • /
    • pp.271-280
    • /
    • 2000
  • This study was conducted to determine the applicable loading rate and to evaluate the possibility of using limestones as an alkalinity source for the removal of ${NO_3}^{-}-N$ remaining after denitrification/nitrification process with the down-flow sulfur packed bed reactor(SPBR). The pretreated sewage was fed to SPBR. Three SPBRs were filled with elemental sulfur particles and limestones and the volumetric ratios of sulfur to limestone were 0%, 12.5% and 25% for R-0%, R-12.5% and R-25%, respectively. The applicable loading rate was evaluated increasing flow rate with influent ${NO_3}^{-}-N$ concentration of 20 mg/L. For R-0% with external alkalinity supply, denitrification efficiency was greater than 96% up to loading rate of $354.8g\;{NO_3}^{-}-N/m^3{\cdot}day$, and corresponding EBCT was 1.4hr. For R-12.5% and R-25%, where alkalinity was supplied by the limestone filled in the reactor, denitrification efficiency was greater than 94% up to loading rate of $283.8g\;{NO_3}^{-}-N/m^3{\cdot}day$, and corresponding EBCT was 1.7hr. The slightly better performance of R-12.5 compared to R-25 suggests that the volumetric sulfur to limestone ratio of 12.5% was enough for the supply of alkalinity required for sulfur-utilizing denitrification. DO was appeared not showing inhibitory effect on sulfur-utilizing denitrification. The clogging of SPBR caused by the produced gas can effectively be eliminated by regular introduction of treated water in up-flow mode.

  • PDF

Source Identification of Ambient PM-10 Using the PMF Model (PMF 모델을 이용한 대기 중 PM-10 오염원의 확인)

  • 황인조;김동술
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.19 no.6
    • /
    • pp.701-717
    • /
    • 2003
  • The objective of this study was to extensively estimate the air quality trends of the study area by surveying con-centration trends in months or seasons, after analyzing the mass concentration of PM-10 samples and the inorganic lements, ion, and total carbon in PM-10. Also, the study introduced to apply the PMF (Positive Matrix Factoriza-tion) model that is useful when absence of the source profile. Thus the model was thought to be suitable in Korea that often has few information about pollution sources. After obtaining results from the PMF modeling, the existing sources at the study area were qualitatively identified The PM-10 particles collected on quartz fiber filters by a PM-10 high-vol air sampler for 3 years (Mar. 1999∼Dec.2001) in Kyung Hee University. The 25 chemical species (Al, Mn, Ti, V, Cr, Fe, Ni, Cu, Zn, As, Se, Cd, Ba, Ce, Pb, Si, N $a^{#}$, N $H_4$$^{+}$, $K^{+}$, $Mg^{2+}$, $Ca^{2+}$, C $l^{[-10]}$ , N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$, TC) were analyzed by ICP-AES, IC, and EA after executing proper pre - treatments of each sample filter. The PMF model was intensively applied to estimate the quantitative contribution of air pollution sources based on the chemical information (128 samples and 25 chemical species). Through a case study of the PMF modeling for the PM-10 aerosols. the total of 11 factors were determined. The multiple linear regression analysis between the observed PM-10 mass concentration and the estimated G matrix had been performed following the FPEAK test. Finally the regression analysis provided source profiles (scaled F matrix). So, 11 sources were qualitatively identified, such as secondary aerosol related source, soil related source, waste incineration source, field burning source, fossil fuel combustion source, industry related source, motor vehicle source, oil/coal combustion source, non-ferrous metal source, and aged sea- salt source, respectively.ively.y.

Synthesis of Li-Zr incorporated mesoporous $TiO_2$ and its application in $CO_2$ adsorption ($TiO_2$ 담지체에 합성된 Li-Zr 메조포러스 분자체 ; 이산화탄소 흡착 응용)

  • Bhagiyalakshmi, Margandan;Peng, Mei Mei;Hemalatha, Pushparaj;Ganesh, Mani;Jang, Hyun-Tae
    • Proceedings of the KAIS Fall Conference
    • /
    • 2010.11a
    • /
    • pp.110-114
    • /
    • 2010
  • Li-incorporated mesoporous $TiO_2$ materials with various pore-sized istributions were synthesized by using triblockcopolymers via a sol-gel process in a queous solution. The properties of the se materials were characterized by HR-TEM, XRD, and BET analysis. All particles have spherical morphology with a diameterrange of $1-3{\mu}m$. The mesoporous $TiO_2$ materials calcined at $400^{\circ}C$ and their specific surface area, average pore size and crystallite sizes were 210 $m^2g^{-1}$, 6.4 nm and 8.8 nm respectively. The Li-incorporated mesoporous $TiO_2$ were tested for $CO_2$ adsorption and its adsorption capacity is 90mg/g. The Li-incorporated mesoporous $TiO_2$ ar eobserved to be thermally stable, recyclable and greens or bent for $CO_2$ capture. The effect of bimetallic $ZrLiTiO_2$ is also studied for $CO_2$ adsorption.

  • PDF