• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.208-211
• /
• 2000

Ba(Mg$_{1}$3/$Nb_{2/3}$)O$_3$ powders were synthesised from mechanochemically treated mixtures of Ba(OH)$_2$. 8$H_2O$, MgO and Nb$_2$O$_{5}$. Perovskite BMN powder of nanosized particles was successfully synthesized by using mechanochemical methods. Density and dielectric constant of samples with mechanochemical methods showed higher values than those of conventional processing.ng.

• Korean Journal of Medicinal Crop Science
• /
• v.17 no.2
• /
• pp.90-96
• /
• 2009

The objective of this study was to investigate the effect of crude ginseng total saponins (CGS) against airway inflammation (AI) and airway hyperresponsiveness (AH) induced by diesel exhaust particles (DEP) in mice. AI and AH were induced by the intratracheal instillation with 0.1 $mg/m{\ell}$ of DEP suspension once a week for 10 weeks combined with ovalbumin (OVA) sensitization. Mice were also treated orally with 75 $mg/m{\ell}$ of CGS, 5 days a week for 10 weeks. Oral CGS treatment decreased in the level of serum immunoglobulin (IgE) and histamine increased by DEP and OVA, and declined respiratory resistance. It also dropped an enhanced infiltration of eosinophils in the bronchoalveolar lavage fluid (BALF) of mice, and an increased T helper type 2 cell derived cytokine levels such as of interleukin (IL)-4, IL-13 and IL-5 in the BALF. However, it did not influence T helper type 1 cytokine such as interferon-gamma in the BALF. These results indicate that CGS may alleviate allergen-related AI and AH in mice and may play an important role in the modulation of asthmatic inflammation.

• Environmental Engineering Research
• /
• v.23 no.1
• /
• pp.1-9
• /
• 2018

The degradation of methylene blue (MB) in an aqueous solution by nano-metallic particles (NMPs) was studied to evaluate the possibility of applying NMPs to remove MB from the wastewater. Scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) were used to characterize the synthesized NMPs before and after the reaction. The effects of the NMP dosage, the initial pH, the initial concentration of MB and the amount of $H_2O_2$ on the MB degradation outcomes were studied. The highest removal rate of MB was achieved to be 100% with an initial MB concentration of 5 mg/L, followed by 99.6% with an initial concentration of 10 mg/L under the following treatment conditions: dose of NMP of 0.15 g/L, concentration of $H_2O_2-100mM$ and a temperature of $25^{\circ}C$. The SEM analysis revealed that the nano particles were not spherical in shape. FTIR spectra shows occurrence of metal oxides on the surfaces of the NMPs. The XPS analyses results represent that Fe, Zn, N, Ca, C and O were occurred on the surfaces of the NMPs. The degradation of MB was suitable for the pseudo-first-order kinetics.

• Korean Journal of Materials Research
• /
• v.24 no.11
• /
• pp.591-598
• /
• 2014

In this research, magnesium powder was prepared by gas atomizing. Refinement behaviors of magnesium powder produced under different conditions were investigated using a mechanical milling (attrition milling) process. Analyses were performed to assess the characterization and comparison of milled powder with different steel ball sizes and milling times. The powders were analyzed by field emission scanning electron microscope, apparent density and powder fluidity. The particle morphology of the Mg powders changed from spherical particles of feed metals to irregular oval particles, then plate type particles, with an increasing milling time. Because of the HCP structure, deformation occurs due to the existence of the easily breakable C-axis perpendicular to the base, which results in producing plate-type powders. An increase in ball size and the impact energy of the magnesium powder maximizes the effect of refinement. Furthermore, it is possible to improve the apparent density and fluidity according to the smoothness of the surface of the initial powder.

• Membrane and Water Treatment
• /
• v.11 no.3
• /
• pp.223-229
• /
• 2020

Here magnetic iron oxide particles (MIOPs) were synthesized under atmospheric air and which size was controlled by regulating the flow rate of alkali addition and used for efficient removal of bovine serum albumin (BSA) from water. The MIOPs were characterized using field-emission scanning electron microscopy (FE-SEM), Fourier transformation-Infrared spectroscopy (FT-IR) and vibrating sample magnetometer (VSM). The results revealed a successful preparation of the MIOPs. The removal efficiency for BSA using MIOPs was found to be about 100% at lower concentrations (≥ 10 mg/L). The maximum adsorption of 64.7 mg/g for BSA was achieved as per the Langmuir adsorption model. In addition, microfiltration membrane for removal of BSA as model protein organic foulant is also studied. The effect of various MIOPs adsorbent sizes of 210, 680 and 1130 nm on the absorption capacity of BSA was investigated. Water permeability of the BSA integrated with the smallest size MIOPs membrane was increased by approximately 22% compared by the neat BSA membrane during dead-end filtration. Furthermore, the presence of small size MIOPs were also effective in increasing the permeate flux.

• Journal of Powder Materials
• /
• v.16 no.2
• /
• pp.98-103
• /
• 2009

The ultrafine titanium carbonitride particles ($TiC_{0.7}N_{0.3}$) below 100nm in mean size were successfully synthesized by Mg-thermal reduction process. The nanostructured sub-stoichiometric titanium carbide ($TiC_{0.7}$) particles were produced by the magnesium reduction at 1123K of gaseous $TiC_{l4}+xC_2Cl_4$ and the heat treatments in vacuum were performed for five hours to remove residual magnesium and magnesium chloride mixed with $TiC_{0.7}$. And final $TiC_{0.7}N_{0.3}$ phase was obtained by nitrification under normal $N_2$ gas at 1373K for 2 hrs. The purity of produced $TiC_{0.7}N_{0.3}$ particles was above 99.3% and the oxygen contents below 0.2 wt%. We investigated in particular the effects of the temperatures in vacuum treatment on the particle refinement of final product.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.12 s.243
• /
• pp.1335-1343
• /
• 2005

The calibration technique of Time Resolved Laser Induced Incandescence was investigated both experimentally and numerically by using standard-sized carbon black particles for the instantaneous soot measurement at exhaust tail pipe in engine. The carbon black particles (19nm, 25nm, 45nm and 58nm) used in this study are similar, though not identical, to soot particle generated from flame not only in morphology but also in micro-structure. The amount of soot loading in flow was controled by a diluted gas (nitrogen) and was measured by the gravimetric method at exhaust pipe in calibrator. The successful calibrations of primary particle size and soot mass fraction were carried out at the range from 19nm to 58nm and from $0.25mg/m^3$ to $37mg/m^3$ respectively. And based on these results the numerical simulation of LII signal was tuned and the effect of an exhaust temperature variation on the decay rate of LII signal was corrected.

• Journal of Korean Society for Atmospheric Environment
• /
• v.11 no.2
• /
• pp.191-198
• /
• 1995

In order to evaluate the distribution and behaviour of atmospheric particulate metals in high-altitude area, we collected 22 aerosol samples using a high volume air sampler at Soback Mt. Meteorological Observation Station from Jan. to Nov. 1993 and analysed for metals (Al, Fe, Mg, Na, Ca, Mn, Co, Ni, Cu, Zn, Cd, and Pb) with ICP/AES and ICP/MS. Although sampling site is located in high-altitude and far from local sources of atmospheric pollutants, enrichments of metals are 2 times higher than those of western coastal reural area. This fact may imply that of metallic pollutants in the coastal rural site were came from further western side (e.g. China), atmospheric metals in this study area contain the signal of metropolitan cities located in the main wind direction (NNW). Sea salts are negligible in the aerosol particle population because reference elements of sea salts (Na, Mg) are all originated from soil particles. The contents of soil particles in aerosols are highest in spring and lowest in winter. Atmospheric enriched elements (Ni, Cu, Zn, Cd and Pb) are diluted with soil particles, especially during the yellow sand period. The results of factor analysis suggest possibility of interpreting their chemical significance in terms of sources (soil, pollutants) and gas-particle conversion processes (formation of ammonium sulfates, ammonium nitrates and/or their mixtures).

• Korean Journal of Medicinal Crop Science
• /
• v.20 no.2
• /
• pp.129-135
• /
• 2012

The feature of asthma are airway inflammation (AI), reversible airway obstruction, and an increased sensitivity to bronchoconstricting agents, elevated airway hyperresponsiveness (AHR), excess production of Th2 cytokines, and eosinophil accumulation in the lungs. This study was performed to investigate if oral administration of $Scutellaria$ $baicalensis$ Georgi water extracts (SBG) have the antiasthmatic potential for the treatment of asthma. Asthmatic HI and AHR were induced by systemic sensitization to ovalbumin (OVA) with intratracheal instillation with 0.1 mg/mL of diesel exhaust particles (DEP) suspension once a week for 10 weeks in BALB/c mice. SBG was orally administered with the concentraion of 200 mg/kg 5 days a week for 10 weeks. Long-term SBG treatment suppressed the eosinophil infiltration into airways from blood, the asthmatic AI and AHR by attenuating the production of cytokine IL-4, IL-5 and IL-13, histamine and OVA-specific IgE. Our data suggest that SBG has inhibitory effects on AI and AHR in a mouse model of asthma, may act as a potential Th2 cytokine antagonist, and may have a therapeutic effect on allergic asthma.

• Journal of the Korean Ceramic Society
• /
• v.56 no.3
• /
• pp.256-268
• /
• 2019

In this research, some mechanical properties of Al₂O₃-based composites containing nanoSiC and nanoMgO additives, including elasticity modulus, hardness, and fracture toughness, have been evaluated. Micron-sized Al₂O₃ powders containing 0.08 wt.% nanoMgO particles have been mixed with different volume fractions of nanoSiC particles (2.5 to 15 vol.%). Untreated samples have been sintered by using hot-press technique at temperatures of 1600 to 1750℃. The results show significant increases in the mechanical characteristics with increases in the sintering temperature and amount of nanoSiC particles, with the result that the elasticity modulus, hardness, and fracture toughness were obtained as 426 GPa, 21 GPa, and 4.5 MPa.m^1/2, respectively.