• KSBB Journal
• /
• 제6권2호
• /
• pp.181-187
• /
• 1991

본 연구에서는 PV에 아나베나세포를 흡착법에 의하여 고정화하였다. 진탕배양하면서 고정화한 겨웅에 비하여 반응기속에 배양액을 trickling 시키면서 배양하고 고정한 경우 높은 세포밀도를 보였다. PV에 고정화한 세포들의 생리적 활성을 조사한 결과 광합성능이 암처보관시에 free cell에 비하여 안정됨을 보였고, msx처리시의 암모니아의 방출도 증가하였다. 뿐만 아니라 고정화한 세포에서 광합성활성의 온도에 대한 내성이 증가하였으며 nitrogenase 효소 활성도 free cell에 비하여 크게 증가하였다. nitrogenase효소에 의한 연속적인 광수소발생을 조사한 결과 혐기적 조건하에서 연속적으로 수소가 생성됨을 볼 수 있었는데 그 발생양은 4mg의 엽록소에 해당하는 아나베나를 충진한 trickling-medium 반응기에서 6일동안 1.6ml의수소가 생성되었다.

• Journal of Microbiology and Biotechnology
• /
• 제9권5호
• /
• pp.548-553
• /
• 1999

A production of $\beta-Carotene$was attempted in a fed-batch culture of Blakeslea trispora by controlling both foam and dissolved oxygen in the presence of surfactant, Span 20. Results obtained from the shake flask cultures indicated that a high concentration of dissolved oxygen was needed for both cell growth and $\beta-Carotene$ synthesis, and the optimal concentration of glucose was found to be in the range of 50-100 g/l. In order to maintain the dissolved oxygen concentration level at higher than 50% of air saturation, pure oxygen was automatically sparged into the medium with air. Foam was controlled by bypassing air from the submerged aeration to the headspace in response to the foam that was caused by Span 20. High agitation speed was found to be detrimental to the cell growth due to shear damage, even though it provided sufficient dissolved oxygen. On the other hand, a low aeration speed caused stagnant regions in the fermentor because of improper mixing. Thus, for the fed-batch operation, agitation speed was increased gradually from 300 to 700 rpm to prevent cell damage at the initial stage of fermentation and to give efficient mixing for a viscous culture broth as the culture proceeded. By controlling dissolved oxygen and foam, a high concentration of $\beta-Carotene$otene (1,190 mg/l) was obtained in 6 days of the fed-batch culture of B. trispora with 2.5% of the dry cell weight, which was approximately 5 times higher than that of the batch cultures.

• 한국포장학회지
• /
• 제6권1호
• /
• pp.47-52
• /
• 2000

개발한 EPS 포장상자가 사과의 신선도 유지효과 기능이 있는지의 여부를 조사코자 사과를 포장하여 $20^{\circ}C$ 저장하면서 골판지상자와 0.02와 0.04mm 두께의 LDPE 필름, 기능성 MA필름과 50배로 발포시킨 EPS상자에 사과를 15kg씩 포장하여 포장재간의 신선도 유지효과를 비교하였다. 저장 40일 후 중량감소는 대조구는 5.7%, EPS 상자는 0.5%의 중량감소가 나타났고, 비타민C도 2.06과 2.31 mg%로 EPS 포장구가 높게 유지되고 있었다. 당도와 산도는 포장구간에 큰 차이가 없었으며 부패의 경우 대조구는 상자당 3-5개과가 발생했으나 EPS포장구는 발생하지 않았으며 외관도 양호한 것으로 나타났다.

• 한국식품과학회지
• /
• 제39권2호
• /
• pp.181-188
• /
• 2007

8주령의 F1B golden Syrian 햄스터에게 동맥경화 유발식이와 함께 녹차 추출물을 각각 500 혹은 1,000 mg/kg b.w.의 양을 매일 경구투여하면서 6주간 사육하였을 때 햄스터 체내의 지질대사와 대동맥 내에서의 지방의 축적 정도에 미치는 영향을 조사하였다. 실험 결과 녹차추출물의 경구투여는 동맥경화유발식이를 섭취하는 햄스터의 혈중 중성지방과 총콜레스테롤치를 농도의존적으로 감소시켰고, 대동맥궁내에서의 지방의 축적을 예방하였다. 특히 녹차추출물 1,000 mg/kg b.w. 투여는 동맥경화유발식이를 섭취한 햄스터에서 간장내의 LDL receptor mRNA level을 증가시키는 경향을 보였다. 이러한 결과로 볼 때 녹차 추출물의 투여는 동맥경화유발식이를 섭취한 햄스터의 혈중 콜레스테롤치를 감소시키고 LDL receptor의 발현을 증가시킴으로써 동맥경화를 예방할 수 있음을 보여주었다.

• 소성∙가공
• /
• 제12권6호
• /
• pp.588-596
• /
• 2003

The relationships between evolution of microstructure and mechanical properties of porous Al-3Si-2Mg-2Cu alloy after the foaming and various heat treating were investigated. The foamed alloy having various densities were manufactured by powder compact foaming and heat treated. Then compression test was performed with deformation rate of 0.5/s. The ultimate compression strength was not changed after solution heat treatment but the flow curve after ultimate strength showed very smooth and uniform plateau region. This change of flow curve means that the deformation mechanism is altered from brittle fracture to ductile deformation and the energy absorption property of Al foam is dramatically improved. The improvement of energy absorption without any detriment of mechanical properties is due to that the very brittle precipitation like Al-Cu and Al-Mg was uniformly dissolved in Al matrix after solution heat treatment. And various mechanical properties of Al alloy porous material were improved by 40% with aging of $200^{\circ}C$ and 50min. These improvements are ascribe to the various fine precipitates like $\Omega$ and $\theta$'.

• 한국식품조리과학회지
• /
• 제7권4호
• /
• pp.93-101
• /
• 1991

The object of this study was to investigate characteristics of kiwifruit protesae and effect of this enzyme on the functionality of casein. The specific activity of crudely prepared kiwifruit pretense on casein was 196.95 units/mg protein, it showed optimum activity at pH 3.0, $60^{\circ}C$. The degree of hydrolysis of casein with pretense treatment steeply increased to 73.5% and 78.9% for 10 and 20 minutes and then reached 84.1% and 89.3% for 1 and 4 hours, respectively. Solubility of non heated control group was 0.2% at pH 4, while the sample groups treated with enzyme for 0, 10 and 20 minutes were 14.5%, 19.2% and 24.0%, respectively. Casein treated with pretense showed marked increase in foam expansion near isoelectric point. However, enzymatically treated groups had lower foam expansion than the control groups. Foam stabilities of enzymatically modified group were lower than those of the control groups at all pH. Emulsifying activity of the non-heated control group was 0% at pH 4, while the groups modified enzymatically for 0, 10, and 60 minutes showed 51.0%, 55.5% and 54.5%, respectively.

• 한국주조공학회지
• /
• 제17권3호
• /
• pp.267-275
• /
• 1997

Fabrication of high strength Mg-Li-Al alloys by squeeze casting was established by the stabilization of melt and mold temperatures, applied pressure and the refining method. The entrapment of inclusions during pouring was prevented using 30 ppi alumina foam filter. The as-cast microstructure consists of a mixture of ${\alpha}$ and ${\beta}$ phases including AILi and $MgLi_2$, Al particles, which are distributed in the ${\beta}$ matrix. The grain sizes of gravity and squeeze casting alloys were 288 ${\mu}m$ and 207 ${\mu}m$ respectively. The addition of Al in Mg-Li alloys promoted the formation of second phase particles, which were adjusted to optimize the properties of Mg-Li-Al alloys. The Mg-10wt%Li-5wt%Al alloy after heat treatment at $350^{\circ}C$ for 1 hour showed the maximum hardness value. This is due to the facts that the amounts of ${\alpha}$ and ${\beta}$ phases and their distributions are dependent upon the solution treatment temperature, and that the amounts of AILi and $MgLi_2Al$ particles are dependent upon the Al content.

• 한국환경복원기술학회지
• /
• 제6권6호
• /
• pp.25-28
• /
• 2003

This study was conducted to development of rapid propagation method by leaf cuttings in Hibiscus hamabo native to southern seaside of Korea, and special object of this study was to determine the effects of IAA, IBA, and NAA on rooting in leaf cuttings of H. hamabo. Rooting was promoted by dipping treated with IAA and IBA. And rooting percentage was greatest at 1,000 and 2,000$mg{\cdot}L^{-1}$ IBA. At higher concentrations of IAA and IBA, more adventitious roots were developed. Also, IAA at high concentrations (above 2,000$mg{\cdot}L^{-1}$) and IBA ranged from 500~2,000$mg{\cdot}L^{-1}$ promoted on root number and rootingratio. However, root formation in Hibiscus leaf cuttings inhibited by NAA application.

• 분석과학
• /
• 제14권2호
• /
• pp.167-172
• /
• 2001

계면활성제를 이용하여 한지 섬유질 슬러지를 폐수시료로부터 효율적으로 제거하는 방법에 대해 연구하였다. 섬유질 슬러지의 농도가 약 80mg/L 인 실험 시료를 음이온 계면활성제인 sodium oleate를 이용하여 부상시켜 제거하려고 할 때 농도는 10mg/L, 유리필터 구멍크기는 $5-10{\mu}m$, 공기 유속은 200 mL/min이 적당하였다. Sodium oleate는 $Ca^{2+}$ 이온과 같은 다가 양이온에 의해 방해를 받을 수 있는데 $Ca^{2+}$ 이온의 농도가 100mg/L 이하일 경우에는 영향이 없었다. 양이온 계면활성제인 cetyltrimethylammonium bromide(CTAB)를 이용하였을 때는 sodium oleate보다 제거율이 좋지 않았으며, 거품도 비교적 많이 생겼다. 전통한지 제조과정에서 분산제로 사용되는 $PAMID^{(R)}$를 실험 재료에 1mg/L 가한 후 CTAB를 1mg/L 가하더라도 섬유질 슬러지들이 매우 잘 엉겼으며 부상시켰을 때 30초 이내에 95% 이상 제거되었으나 sodium oleate는 효과적이지 못하였다.

• 대한화학회지
• /
• 제58권3호
• /
• pp.283-288
• /
• 2014

A column solid phase extraction procedure based on modified polyurethane foam (PUF) by a newly synthesized Schiff base ionophore, named 2,2'-{iminobis[propane-3,1-diylnitrilo(1E)prop-1-yl-1-ylidene]}diphenol, was developed for preconcentration step of trace amounts determination of copper ions in water samples by atomic absorption flame spectroscopy. The influence of parameters on the adsorption process such as sample pH, amount of modified PUF packed in the column, type and volume of stripping reagent and its flow rate were investigated and optimized. Under optimum experimental conditions, the calibration graph was linear in a relatively wide range ($0.005-210{\mu}g/ml$) with a limit of detection $0.002{\mu}g/ml$ of copper. The proposed method allows achieving to a concentration factor of >133. The capacity of a column (1.6 cm i.d.) packed by 6 g of PUF modified by 12 mg of the Schiff base was found to be $247.7({\pm}2.1){\mu}g$ of copper. It was found that the adsorption process was highly selective towards copper ions with respect to some associated metal ions. The presented procedure was successfully applied for determination of copper in some water samples.