• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.107-118
• /
• 2022

As connected and automated driving(CAD) technology is entering its commercialization stage, service platforms providing CAD-based mobility services have increased these days. However, CAD-baded mobility services with these platforms need more consideration for the demand for mobility services when determining target areas for CAD-based mobility services because current CAB-based mobility design focus on driving performance and driving stability. For a more efficient design of CAD-based mobility services, we analyzed the applicability for the introduction of CAD-based mobility services in terms of driving difficulty of CAD and demand patterns of current non-CAD based-mobility services, e.g., taxi, demand-responsive transit(DRT), and special transportation systems(STS). In addition, for the spatial analysis of the applicability of the CAD-based mobility service, we propose the Index for Autonomous Driving Applicability (IADA) and analyze the characteristics of the spatial distribution of IADA from the network perspective. The analysis results show that the applicability of CAD-based mobility services depends more on the demand patterns than the driving difficulty of CAV. In particular, the results show that the concentration pattern of demand in a specific road link is more important than the size of demand. As a result, STS service shows higher applicability compared to other mobility services, even though the size of demand for this mobility service is relatively small.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.46-53
• /
• 1999

As of July 1999, i,185 lomocotives(excluding metropolitan area electric locomotives) are in Korean National Railroad(KNR). With this limited number of resources assigning locomotives to each trains of timetable is very important in the entire railway management point of view because schedule can be regarded as goods in transportation industry. On a simple rail network, it is rather easier to assign proper locomotives to trains with the experience of operating experts and get optimal assignment solution. However, as the network is getting bigger and complicated, the number of trains and corresponding locomotives will be dramatically increased to rover all the demands required to service all of the trains in timetable. There will be also numerous operational constraints to be considered. Assigning proper locomotives to trains and building optimal cyclic rotations of locomotive routings will result in increasing efficiency of schedule and giving a guarantee of more profit. The purpose of this study is two fold: (1) we consider a planning-level locomotive scheduling problem with the objective of minimizing the wasting cost under various practical constraints and (2) development of implementation prototype program of its assigning result. Not like other countries, i.e. Canada, Sweden, Korean railroad operates on n daily schedule basis. The objective is to find optimal assignment of locomotives of different types to each trains, which minimize the wasting cost. This problem is defined on a planning stage and therefore, does not consider operational constraints such as maintenance and emergency cases. Due to the large scale of the problem size and complexity, we approach with heuristic methods and column generation to find optimal solution. The locomotive scheduling prototype consists of several modules including database, optimization engine and diagram generator. The optimization engine solves MIP model and provides an optimal locomotive schedule using specified optimization algorithms. A cyclic locomotive route diagram can be generated using this optimal schedule through the diagram generator.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.34 no.3
• /
• pp.89-107
• /
• 2023

Public libraries should plan and provide services that satisfy various needs of the local community users. In order to understand library users, it is essential first to grasp the service areas of libraries. The current service areas of public libraries are primarily set based on administrative boundaries of the areas where the libraries are located, which limits the consideration of actual user access patterns to the libraries. In this study, we aim to create service areas that incorporate the transportation and geographical characteristics of the library's surroundings and reflect the access patterns of library users. Specifically, we utilized street network data from 502 libraries in 7 metropolitan cities to determine the travel distance and time from user locations, considering gradients, to the libraries. Subsequently, we applied the shortest path algorithm to generate service areas within a 30-minute walking or driving range. As a result, we confirmed that there are differences in the service area patterns of libraries depending on topographical factors, and this better reflects the realistic conditions of library access compared to service areas based on straight-line distances. This method of generating service areas contributes to a more accurate understanding of library users' numbers, characteristics, and needs.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.101-108
• /
• 2004

The new transit fare in the Seoul Metropolitan is basically determined based on the distance-based fare system (DBFS). The total fare in DBFS consists of three parts- (1) basic fare, (2) transfer fare, and (3) extra fare. The fixed amount of basic fare for each mode is charged when a passenger gets on a mode, and it proceeds until traveling within basic travel distance. The transfer fare may be added when a passenger switches from the present mode to another. The extra fare is imposed if the total travel distance exceeds the basic travel distance, and after that, the longer distance the more extra fare based on the extra-fare-charging rule. This study proposes an algorithm for finding minimum fare route in DBFS. This study first exploits the link-label-based searching method to enable shortest path algorithms to implement without network expansion at junction nodes in inter-modal transit networks. Moreover, the link-expansion technique is adopted in order for each mode's travel to be treated like duplicated links, which have the same start and end nodes, but different link features. In this study, therefore, some notations associated with modes can be saved, thus the existing link-based shortest path algorithm is applicable without any loss of generality. For fare calculation as next steps, a mathematical formula is proposed to embrace fare-charging process using search process of two adjacent links illustrated from the origin. A shortest path algorithm for finding a minimum fare route is derived by converting the formula as a recursive form. The implementation process of the algorithm is evaluated through a simple network test.

• Journal of Intelligence and Information Systems
• /
• v.28 no.4
• /
• pp.1-25
• /
• 2022

After the first Covid-19 confirmed case occurred in Korea in January 2020, interest in personal transportation such as public bicycles not public transportation such as buses and subways, increased. The demand for 'Ddareungi', a public bicycle operated by the Seoul Metropolitan Government, has also increased. In this study, a demand prediction model of a GRU(Gated Recurrent Unit) was presented based on the rental history of public bicycles by time zone(2019~2021) in Seoul. The usefulness of the GRU method presented in this study was verified based on the rental history of Around Exit 1 of Yeouido, Yeongdengpo-gu, Seoul. In particular, it was compared and analyzed with multiple linear regression models and recurrent neural network models under the same conditions. In addition, when developing the model, in addition to weather factors, the Seoul living population was used as a variable and verified. MAE and RMSE were used as performance indicators for the model, and through this, the usefulness of the GRU model proposed in this study was presented. As a result of this study, the proposed GRU model showed higher prediction accuracy than the traditional multi-linear regression model and the LSTM model and Conv-LSTM model, which have recently been in the spotlight. Also the GRU model was faster than the LSTM model and the Conv-LSTM model. Through this study, it will be possible to help solve the problem of relocation in the future by predicting the demand for public bicycles in Seoul more quickly and accurately.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.4
• /
• pp.527-536
• /
• 2022

The purpose of this study is to predict changing traffic environments and related economic effects by reflecting the changed KTDB and socio-economic indicators pertaining to Mulgeum station, a general railway stop, when it is confirmed as a KTX stop. To analyze the data of this study, socioeconomic indicators and the general status of transportation facility operations were investigated with reference to related statistical data, centered on the country overall and on Yangsan city in particular. In addition, we investigated and referenced the railroad facility construction plan and train operation plan, which are national high-level plans related to land development and transportation network construction. Currently, there are only ITX trains (4 times/day) and Mugunghwa trains (29 times/day) that stop at Mulgeum station in Yangsan, meaning that passengers cannot use KTX trains in the Yangsan area. In particular, the need for a KTX stop at Mulgeum station has been continuously raised because train users in the Yangsan area have inconvenient transportation in that they must travel 40 minutes to Ulsan station or 30 minutes to Gupo station to use the KTX. As a result of analyzing railroad transportation demand that will change in the future as the KTX stop at Mulgeum station is confirmed, the number of passengers boarding and arriving at Mulgeum station is predicted to be 1,674 passengers/day by 2025. In addition, the numbers of train passengers that are converted from Ulsan and Gupo stations due to the stop at Mulgeum station are predicted to be 594 passengers/day boarding and 562 passengers/day arriving by 2025. In the future, if Yangsan citizens use the KTX Mulgeum station, the access time to Mulgeum station can be shortened to 22 minutes from 65 minutes, and it is predicted that the inconvenience of transferring between railroads will be resolved, with the waiting time for transfers reduced by up to a maximum of 40 minutes. Therefore, the economic effect of creating a KTX stop at Mulgeum station was analyzed to be B/C=1.823 when general railroad operating costs are not taken into account and B/C=2.127 when general railroad operating costs are considered. In conclusion, when using KTX trains to visit the Seoul Metropolitan Area, it takes 2 hours and 43 minutes to use Mulgeum station without using Ulsan station or Gupo station, which is considered to be very effective for reducing travel times and improving the economic feasibility of this development; it is also expected that Yangsan city will be able to improve accessibility and mobility to the Seoul Metropolitan Area by breaking free from the disgrace of being a remote location given its link to KTX in the future.

• Journal of the Economic Geographical Society of Korea
• /
• v.10 no.1
• /
• pp.44-63
• /
• 2007

The purpose of this study is to propose mining processes in the large trip-transaction database of the Metropolitan Seoul area and to analyze the spatial characteristics of travel behavior. For the purpose. this study introduces a mining algorithm developed for exploring trip patterns from the large trip-transaction database produced every day by transit users in the Metropolitan Seoul area. The algorithm computes trip chains of transit users by using the bus routes and a graph of the subway stops in the Seoul subway network. We explore the transfer frequency of the transit users in their trip chains in a day transaction database of three different years. We find the number of transit users who transfer to other bus or subway is increasing yearly. From the trip chains of the large trip-transaction database, trip patterns are mined to analyze how transit users travel in the public transportation system. The mining algorithm is a kind of level-wise approaches to find frequent trip patterns. The resulting frequent patterns are illustrated to show top-ranked subway stations and bus stops in their supports. From the outputs, we explore the travel patterns of three different time zones in a day. We obtain sufficient differences in the spatial structures in the travel patterns of origin and destination depending on time zones. In order to examine the changes in the travel patterns along time, we apply the algorithm to one day data per year since 2004. The results are visualized by utilizing GIS, and then the spatial characteristics of travel patterns are analyzed. The spatial distribution of trip origins and destinations shows the sharp distinction among time zones.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.41-51
• /
• 2008

As the local bus service diagram after the bus route reform is studied by variable analysis based on traffic card data and income adjustment data, the characteristic of the local bus system is revealed in Busan Metropolitan city. The relationship between traveling length and traveling time is influenced by traveling velocity. In order to keep a headway within 10 minutes, bus service number per minute should be over 0.1013 vehicles. The traveling time of afternoon is generally longer than that of forenoon. Compared with the bus used by a lot people, the deviation of that used by a few people is larger in the all cases of length, headway, time and velocity. According to the analysis of the relationship among card trip number, average income and transfer rate, the relationship between card trip number and average income is expressed as linear function in the general bus and as exponential function in the high-grade & rapid bus. The 1% increase of transfer rate is equal to 6.3 trip/vehicle/day decrease and 4.9 trip/vehicle/day decrease in two bus types respectively. The four effective variables are defined by the discriminant analysis between the profitable routes and the unprofitable; According to discriminant size, bus service number per km, bus via suburb, subway meeting number, bus via university. In order to increase the income when the minibus will be included among public transit transfer system in 2008, it should be necessary to settle the bus network and revitalize the public transit better. In order to decrease the cost, it should be necessary to reorganize the hierarchy between the local bus and the minibus better.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.3
• /
• pp.139-150
• /
• 1998

Due to development of science and telecommunication with wide-spread computer supply, it could be done through computer automatically instead of manpower-work for paper transportation & paper approval. It is developed to so-called Factory Automation. Further, it is developed to Office Automation. Trading companies & concerned trade authorities are interested in Trade Automation that such technique is applied to trade work. Generally, Trade Automation means to realize paperless trade by exchanging electronic papers through inter-computers after concerned trade operators transformed various papers to electronic papers that computer could read. In case Trade Automation fix in the trade business, it is expected one of innovations among traditional paper work of trade business, namely without going import-export authorities, Customs office, Banks. Shipping companies, Marine insurance companies on hand-carrying papers, it could be fast, simple, correct to finish every trade procedures such as commercial business, foreign currency, customs clearance, transportations, insurance. terms of payment, etc., with Electronic Data Interchange through computer facilities. Especially, telecommunication for trade form could be helpful to proceed trade paper with one-run-method Further we can anticipate 6 effects for Trade Automation as belows : First, as explained just above articles, with completion for Trade Automation, every trade procedures can be done by computer. so, time to work can be diminished. namely. logistics cost including accessory costs for trade procedures can be saved much. Second, viewing to private enterprise, effect of Office Automation can be maximized and rapid, correct exchange for various trade informations could raise efficiency of enterprise management establishing rational production, storage, transportation and could raise competition improving standard for consumers's service. Third, establishing Trade Automation systems makes it easier piling-up of harbor cargo by pre-transmission of electronic paper & trade informations make it possible to finish customs clearance in advance and can be dispatched upon cargo arrival. Fourth, most of concerned trade authorities such as import-export approval office. financial authorities, transport & insurance companies concentrated in Metropolitan area(Seoul, In -Cheon, Kyung-Ki). Therefore, in case Trade Automation could be realized. it is possible to proceed trade business instantly in every country area by computer facilities. Also. it contribute well-balanced development for suburb. region area by suburb dispersion of trading companies. Fifth, on the way to Trade Automation establishment & its enlargement process. producing enormous demand for over-all telecommunication such as hardware. software. network makes opportunity to progress telecommunication industry & concerned industries. Finally. Trade Automation accelerate change of employment structure leading unnecessary labors on the industries of office & logistics to manufacturing area.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.89-99
• /
• 2004

The purpose of this study is to evaluate the value of information on Bus-Route concerning on the User's Individual value. The value of information is estimated with the price of time saving by using the information. The price of unit time for each user is applied to convert the saving time to the cost. To estimate the user's expense from origin to destination the previous model is modified. Bus-travel cost is estimated with variables such as bus-travel time, bus-interval, bus-fare, and the price of walking distance. In this study, to estimate in-vehicle time the bus-travel time model is developed based on the spatial characteristics distinguished by three types of circular-road in the network of Daegu Metropolitan area. For the case study, a set of the origin and destination is selected as Dalsu-gu District Office and East Daegu Train Station respectively. There are several bus-routes which can be used as direct or transferable bus-routes selected. The study showed that when the value of time for individual users is \1,738/hr, there is no benefit to using information of transferable bus-routes. It also showed that the more discount rates of bus fare is increased, the benefit to using information of transferable bus-routes is increased, and that the lower value of time is, the benefit to using information of transferable bus-routes is increased.