• Analytical Science and Technology
• /
• v.15 no.1
• /
• pp.80-86
• /
• 2002

The simultaneous analysis of the odorous compounds designated by law in Korea and Japan was examined with the thermal desorber gas chromatography-mass spectrometry using one column. The approximate concentrations of trimethyl amine, acetaldehyde, methyl mercaptan and dimethyl sulfide were estimated. Styrene, dimethyl disulfide, propionaldehyde, n-butyl aldehyde, i-butyl aldehyde, n-valeraldehyde, i-valeraldehyde, ethyl acetate, toluene, xylene, methyl i-butyl ketone and i-butanol were detected at concentrations of the detection limits of their threshold values. As a typical example of simultaneous analysis of the odorous compounds, the volatile organic compounds emitted from compost procedure of food waste were concentrated and analyzed with thermal desorber/GC/MSD, and major malodorous compounds were estimated from the concentrations and threshold values of the detected components. From the result of analysis, 34 compounds were confirmed and among them, trimethyl amine, i-valeraldehyde, methyl mercaptan, methyl allyl sulfide, dimethyl sulfide, acetaldehyde, ethanol, n-butyaldehyde were expected to attribute to the odor in order of strength.

• Analytical Science and Technology
• /
• v.18 no.2
• /
• pp.130-138
• /
• 2005

Volatile organic compounds (VOCs) have been recognized as major contributor to air pollution. Catalytic oxidation in VOCs can give high efficiency at low temperature. In this study, monometallic Pt, Ir and bimetallic Pt-Ir were supported to $TiO_2$. Xylene, toluene and methyl ethyl ketone (MEK) were used as reactants. The monometallic or bimetallic catalysts were prepared by the excess wetness impregnation method and characterized by XRD, XPS and TEM analysis. Result reveal that Pt catalyst has higher conversion than Ir catalyst and Pt-Ir bimetallic catalysts. The existence of multipoint actives in, Pt-Ir bimetallic catalysts gives improved performance for the Pt metalstate. Bimetallic catalysts have higher conversion for VOCs than monometallic ones. The addition, VOCs oxidation follows first order kinetics. The addition of small amount of Ir to Pt promotes oxidation conversion of VOCs.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.737-741
• /
• 1997

The typical removal method of volatile organic compounds is adsorption process. In this study, granular activated carbon and activated carbon fiber were used as adsorbents, and the adsorption behavior for the two types of adsorbent was compared. And they were regenerated by supercritical carbon dioxide extraction at a constant temperature, 318.15 K, and 2000, 2500, 3000 psi respectively. The desorption percentage of initial adsorbates and iodine values were increased with pressure of supercritical carbon dioxide. The regeneration time was 70 and 60 minutes in adsorbents loaded with methyl ethyl ketone(MEK) and benzene, respectively. The desorption percentages were 64.0% for granular activated carbon and 55.3% for activated carbon fiber loaded with MEK, and 59.1% for granular activated carbon and 45.2% for activated carbon fiber loaded with benzene. The exit concentration could be evaluated by Tan and Liou model. Therefore, the granular activated carbon and the activated carbon fiber could be regenerated by supercritical fluid extraction process.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.744-753
• /
• 2001

One of the most important factors which affect the impact strength of high impact polystyrene (HIPS) is the rubber-phase particle size and size distribution. In this study, HIPS was prepared from a batch reactor to observe the influence of reaction conditions such as rubber content, agitation speed and prepolymerization time on the particle size and size distribution. Measurements concerning the particle size distribution were conducted using a particle size analyzer. Due to swelling, the particle suspended in toluene increases in size with lower heat-treatment temperature and shorter heat-treatment time, while the particle in methyl ethyl ketone shows quite reasonable size without any effort of heat-treatment. As rubber content increases, the average particle size increases substantially, but the increase in agitation speed at lower rubber contents does not have much influence on the size. However, the polystyrene-phase particles occluded in rubber-phase become more uniform as agitation speed increases. Longer prepolymerization time produces rubber-phase particles with narrower particle size distribution.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.11
• /
• pp.736-739
• /
• 2014

In this paper, we propose a enhanced anti-corrosion property of the ground system by coating the CNT/PVDF composite film on it. Polymer material used for preventing the corrosion of ground system is polyvinylidene fluoride (PVDF), and conducting filler for obtaining conductivity of the composite film is multi-walled carbon nanotubes (MWCNTs). The MWCNTs were dispersed in the organic solvent of methyl ethyl ketone 2-butanone (MEK) with different concentration ratios, and the PVDF was solved in the MEK solvent with constant concentration ratio of 1 wt%. The CNT/PVDF composite solution was perpared by mixing and re-dispersing the CNT solution and the PVDF solution. Finally, the CNT/PVDF composite films were fabricated by the spray coating method using the above composite solution. Electrical conductivity, surface states, and anti-corrosion property of the CNT/PVDF composite films coated on the Cu substrate were evaluated. We found that the CNT/PVDF composite film showed relatively low resistance, hydrophobic surface state, and chemical stability. Consequently, we could improve the anti-corrosion property and maintain the electrical conductivity of the ground system by coating the CNT/PVDF composite film on it.

• Journal of Preventive Medicine and Public Health
• /
• v.28 no.2 s.50
• /
• pp.386-397
• /
• 1995

A cross sectional study was performed to evaluate the neurobehavioral effects of chronic exposure of complex organic solvents, using NCTB(Neurobehavioral Core Test Battery) recommended by WHO(World Health Organization). Forty female shoe factory workers and twenty-two controls matched with age were participated. The tests were performed in the morning before start of work, to exclude the effects of acute exposure. Workers were exposed mainly to toluene, methyl ethyl ketone, n-hexane, cyclo-hexane, dichloroethylene, trichloroethylene, benzene, xylenes etc. The ranges of present solvent exposure of hygienic effect were $0.46\sim0.71$ in the process using adhesives indirectly, and $1.83\sim2.39$ in the process using it directly. We reclassified the subjects, according to cumulative exposure. It showed significantly poorer performances in high exposed group on Santa Ana Dexterity and Benton Visual Retention, compared with control group. After controlling confounder, the significances were still remained. But, further cohort studies, having the information of personal exposure dose from entering a factory, are required to clarify the effects of chronic exposure of complex organic solvents in relation to dose and duration of exposure.

• Environmental Analysis Health and Toxicology
• /
• v.9 no.1_2
• /
• pp.37-51
• /
• 1994

To evaluate the genotoxicities of workers exposed to glue and glue cleaning solution, ambient air monitoring of working place, animal study and human monitoring were carried out. By GC-MS analysis, air samples collected from shoesmaking plant were found to be toluene, xylene, cyclohexane, n-hexane, methyl ethyl ketone, trichloroethylene, butylacetate, isopropyl alcohol. Glue and glue cleaning solution from shoesmaking plant were applicated topically to the CD-1 mice. DNA was isolated from skin 24 hr following the application and analysed for DNA-adducts using the nuclease $P_1$version of $^{32}$P-postlabelling assay. RAL (Relative Adduct Labelling, adducts$10^8$ nucleotides) was significantly increased in a dose-dependent manner in the glue cleaning solution treated mice skin. Peripheral blood DNA-adducts of workers exposed to glue and glue cleaning solution were also analysed by the same method, but there were not significant differences in the peripheral blood DNA-adducts level between exposed and control workers. In addition, glue cleaning solution from shoes factory was evaluated for mutagenicity in the Salmonella plate incorporation assay using strains TA 100 and TA 1535 in the presence and absence of Arochlor 1254-induced rat liver S$_{9}$. There was evident mutagenicity for cleaning solution in TA 100 regardless of $S_9$, but TA 1535 showed positive only in the absence of $S_9$when predicted by Stead model of mutagenicity prediction (p=0.0000). The urine concentrates from workers and controls were also assayed for mutagenicity towards strain TA 100 of Salmonella typhimurium in the presence of $S_9$ using Kado's microsuspension assay, but their mutagenic activities were not found to be significant. These data suggest that shoesmaking workers are exposed to genotoxic compounds and need to be monitored by testing the mutagenicity of human urines. However, $^{32}$P-postlabelling application requires further validation for the routine monitoring of human exposure.osure.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.2
• /
• pp.206-219
• /
• 2008

The purpose of this study is to evaluate concentrations of carbonyl compounds during summer season in Seoul metropolitan area. The air samples were collected at 7 sites in this area from June 2001 to June 2003. The carbonyl compounds were analyzed by DNPH/HPLC method. The analytical method applied in this study showed good repeatability, linearity, and sensitivity. The most abundant carbonyl was formaldehyde (average 4.48 ppb), and followed by acetone, acetaldehyde, methyl ethyl ketone, butyraldehyde, propionaldehyde and benzaldehyde, respectively. Concentrations of carbonyl compounds in June were higher than those in August. There was not only higher solar radiation but also higher ozone concentration in June than in August. As a result o photochemical reactions, carbonyl compounds from both primary and secondary sources are likely to contribute to the formation of ozone. The contributions to photochemical ozone creation of two carbonyl compounds such as formaldehyde and acetaldehyde were estimated to be about 70%. Ratios of formaldehyde to acetaldehyde in this study ranged from 1.13 to 4.26, which are generally equivalent levels to those of other urban areas in domestic and foreign countries.

• Clean Technology
• /
• v.23 no.4
• /
• pp.421-428
• /
• 2017

In this study, we have investigated the characteristics of adsorption and desorption of toluene, methyl ethyl ketone (MEK) and their binary component using activated carbon. The BET analysis was performed to identify the characteristics of the activated carbon, and the desorption characteristics with temperature were examined to find out an optimum desorption temperature. Ten cyclic experiments of adsorption-desorption were performed, where each adsorption temperature was maintained at room temperature and desorption temperature at upto $120^{\circ}C$. In case of single component cyclic test, the efficiencies of adsorption and desorption decreased as the cycle increased. MEK which has lower affinity with activated carbon than toluene showed lower efficiencies of adsorption and desorption. In case of binary component cyclic test, a typical roll-up phenomenon was observed during adsorption process, where MEK reaches at breakpoint first and then was swept out by toluene.

• Korean Journal of Plant Resources
• /
• v.10 no.2
• /
• pp.183-187
• /
• 1997

This study was carried out to find the growth characteristics and content of sarsasapogenin in different plant parts of Anemarrhena asphodeloides Bunge. Five native-cultivars were collected and evaluated for several agronomic traits. The collected native-cultivars were classified into two seed-attached peduncle and vegetative propagation types. Seed-attached peduncle lines were predominance of growth traits than vegetative propagation. For the content of sarsasapogenin in each part was investigated, BuOH extarct of 'timo' was developed on silica gel 60G plate using elution solvent($CHC1_2$: Methyl ethyl Ketone : EtOH = 11 : 2 : 0.5). The developed plate were examined using Dual Wavelength Zig - Zag using. Content of sarsasapogenin in main root and lateral root were respectively 1.67mg/g and 1.31mg/g.