• Applied Chemistry for Engineering
• /
• v.10 no.5
• /
• pp.796-803
• /
• 1999

Solution copolymerization of styrene(St.) with methyl methacrylate(MMA), ethyl methacrylate(EMA) and n-butyl methacrylate(BMA) was carried out with benzoylperoxide(BPO) as an initiator in toluene at $80^{\circ}C$ in a continuous stirred tank reactor. Reaction volume and residence time were 0.6 liters and 3hours, respectively. The monomer reactivity ratios, $r_1(St.)$ and $r_2(RMA)$ determined by both the Kelen-Tudos method and the Fineman-Ross method were $r_1(St.)=0.60(0.61),\;r_2(MMA)=0.59(0.60);\;r_1(St.)=0.65(0.62),\;r_2(EMA)=0.55(0.52);\;r_1(St.)=0.75(0.67),\;r_2(BMA)=0.63(0.56)$. The cross-termination factor $\Phi$ of the copolymer over the entire St. compositions ranged from 0.26 to 0.96. The $\Phi$ factors of St.-RMA copolymer were increased with increasing St. content. The simulated conversions and copolymerization rates were compared with the experimental results. The average time to reach dynamic steady-state was three times and half of the residence time.

• Applied Biological Chemistry
• /
• v.20 no.2
• /
• pp.236-241
• /
• 1977

Analytical method of carbofuran (2,3-dihydro-2, 2-dimethyl-7-benzofuranyl methyl carbamate) residues and its persistence in rice seeds, rice seedlings, rice plants and soils were studied by gas-liquid chromatographic analysis using electron capture detector. 1. The effective column material for clean-up is Florisil (5% $H_2O$)+Alumina (4% $H_2O$)+absorbent mixture with rinsing the first 300l of eluants to remove impurities in the column materials. 2. The method of applying an gelatin encapsulated carbofuran to the root zone of rice plant is the longest persistence in its residues. 3. By seed treatment, no carbofuran residues were detected in rice seeds and seedlings. 4. The amounts of carbofuran residues in rice seedlings is in proportion to the soaking time of rice seedlings in carbofuran solution rather than the concentration of the chemical. 5. Applying carbofuran by root zone has the higher and the loger residual effect than broadcast. 6. Persistence of carbofuran in the high clay content soil is longer than in the low clay content soil. 7. No carbofuran residue was detected in rough rice at havesting time.

• Natural Product Sciences
• /
• v.13 no.1
• /
• pp.33-39
• /
• 2007

Eleven polyhydroxyursane triterpenoids (PHUTs) were tested to determine their cytoprotective, immunosuppressive and anti-inflammatory effects. To compare the bioactivities of $19{\alpha}$-hydroxyursane-type triterpenoids {23-hydroxytormentic acid (6), its methyl ester (7), tormentic acid (8), niga-ichigoside $F_1$ (9),euscaphic acid (10) and kaji-ichigoside $F_1$ (11)} of the Rosaceae crude drugs (Rubi Fructus and Rosa rugosae Radix) with PHUTs possessing no $19{\alpha}-hydroxyl$ of Centella asiatica (Umbelliferae), the four PHUTs, asiaticoside (1), madecassoside (2), asiatic acid (3), and madecassic acid (4) were isolated from C. asiatica and 23-hydroxyursolic acid (5) from Cussonia bancoensis. Cytoprotective effects were assessed by measuring cell viabilities against cisplatin-induced cytotoxocity in $LLC-PK_1$, cells (proximal tubule, pig kidney) to determine whether these agents have protective effects against nephrotoxicity caused by cisplatin. The inhibitory effect of 11 PHUTS on nitric oxide (NO) and prostaglandin $E_2\;(PGE_2)$ were evaluated by measuring nitrite accumulation in lipopolysaccharide (LPS)-induced macrophage RAW 264.7 cells, and their anti-inflammatory effects were tested in 12-O-tetradecanoylphorbol-13-acetate (TPA)-induced mouse ear edema model. Six MHUTs (compounds 1, 2, 4, 6, 10, and 11) exhibited higher cell viabilities during cisplatin-induced cytotoxicity testing even at a concentration of $200\;{\mu}g/ml$ than cisplatin only-treated group, suggesting that ese compounds have the potentcytoprotective efffcts. Compounds 1 and 3 of the C. asiatica and niga-ichigoside $F_1$ exhibited no inhibitory effect on NO and/or $PGE_2$ production whereas other PHUTs produced mild to significant NO and/or $PGE_2$ production.The four compounds (2, 5, 9, and 10) potently inhibited mouse ear edema induced by TPA whereas two compounds (1 and 3) had no activity in this test. These results suggest that many PHUTs are potentchemopreventives. Structure-activity relationship (SAR) was also discussed in each assay with regard to the significant role of OHs at the position of 2, 3, 6, 19, and 23 and to the glycoside linkage at the 28-carboxyl.

• Journal of the Korean Applied Science and Technology
• /
• v.12 no.2
• /
• pp.121-130
• /
• 1995

This project has been worked out for isolation of EPA-producing bacteria from marine source of sea water, sea sediment and intestinal contents eviscerated from some red-muscle fish such as mackerel, horse-mackerel and spike fish. The samples were precultured on the media of PPES-II glucose broth and then pure-cultured on Nutrient agar and P-Y-M glucose. Lipids extracted from those bacterial mass collected by centrifugation were analysed in terms of lipid class and fatty acid composition. The results are resumed as follows : 1. 112 strains from sea water and 76 strains from sea sediment were tested for their EPA producing capability, but both strains of (SA-67 and SA-91) from the former and four strains(SS-35, 37, 51 and 71) from the latter have been proved to produce EPA above the level of 2% of total fatty acids. The strains such as GS-11, 29, 31, HM-9, 29, B-18, 33, 107, YL-129, 156, 203, 77, 104 and 256 which were isolated from fish intestinal contents, have also produced EPA at higher level than 2% of total fatty acids. 2. Contents of total lipids extracted from the cultures of these strains grown at $25^{\circ}C$, range from 2.8% to 6.9% (on dry weight %), and they are mainly composed of polar lipids($40.9{\sim}52.9%$) such as phosphatidyl glycerol($^{+}cardiolipin$)(?) and phosphatidyl ethanolamine ($33.8{\sim}40.0%$), with smaller amount of free fatty acid ($11.2{\sim}20.2%$). 3. EPA was isolated from a mixture of fatty acid methyl esters obtained from the lipid of each strain by HPLC in silver-ion mode and was identified by GC-Mass spectrometry. 4. The strains of SW-91, GS-11, GS-29, HM-9, B-18 and YL-203 grown at $25^{\circ}C$ have a level of 5% EPA in their total fatty acids, and the GS-11 and HM-9 strains show a tendency of increase in the EPA level with an increase of growth temperature.

• Elastomers and Composites
• /
• v.44 no.4
• /
• pp.447-454
• /
• 2009

We synthesized polyester-diol containing Cloisite 30B which is exfoliated during the synthesis. First, esterification was conducted with excess adipic acids and two 2-hydroxyethyl groups of the tertiary ammonium tethered to Cloisite 30B silicate layer. Due to the small molecular size of adipic acid ($d{\approx}3.0\;{\AA}$, $L{\approx}9.3\;{\AA}$), it penetrated into the interlayer of Cloisite 30B, reacted with the 2-hydroxyethyl groups, and produced the tertiary ammonium that has the two ethyl-ester adipic acid groups, one methyl group, and one hydrogenated alkyl group. Through the esterification, the molecular size of the tertiary ammonium increased and as the result, the basal space of Cloisite 30B increased from $18.4\;{\AA}$ to more than $58.3\;{\AA}$. The produced ethyl-ester adipic acid and unreacted adipic acid reacted with excess diethylene glycol ([COOH]/[OH]${\approx}0.6$) to be polyester-diol. The COOH conversion calculated from the acid value of the reactant mixture was 94%. The number average molecular weight and PDI of the produced polyester-diol were 830 g/mol and 1.2, respectively.

• Clean Technology
• /
• v.18 no.4
• /
• pp.366-372
• /
• 2012

Three acrylic copolymers containing tris(8-hydroxyquinoline) aluminum (AlQ3) pendant group (25 wt%), acrylateco-HEMA-$AlQ_3$ (25 wt%), were successfully synthesized by free radical polymerization from acrylates [methyl methacrylate (MMA), acrylonitrile (AN) or 2-hydroxyethyl methacrylate (HEMA)] with HEMA functionalized with AlQ3 pendant groups (HEMA-p-$AlQ_3$). The glass transition temperatures ($T_g$) of MMA-co-HEMA-p-$AlQ_3$ (copolymer 1), AN-co-HEMA-p-$AlQ_3$ (copolymer 2) and HEMA-co-HEMA-p-$AlQ_3$ (copolymer 3) were found to be 158, 150 and $126^{\circ}C$, respectively. They have good thermal stability: a very desirable feature for the stability of OLEDs. Their solubility, thermal properties, UV-visible absorption and photoluminescence behaviors were investigated. They were found to be soluble in various organic solvents such as tetrahydrofuran (THF), dimethylformamide (DMF), toluene and chloroform. It was also found that the UV-visible absorption and photoluminescence behaviors of these copolymers were similar to those of pristine $AlQ_3$. Green organic light-emitting diodes (OLEDs) have also been fabricated using these copolymers as light emission/electron transport components obtained easily by spin coating, and their current density voltage (J-V) curves were compared. The OLED device of the copolymer 3 had the lowest turn-on voltage of about 2 V compared to other copolymer types devices.

• Applied Biological Chemistry
• /
• v.11
• /
• pp.83-88
• /
• 1969

94 Cellulase producing strains were isoated from soils, composts, rotten woods and straws, and gastric contents and feces of herbivorous animals in various places. Among them, the strain MC-9, MC-10, MC-53 and MC-61 were found to be highly active in the degradation of carboxy methyl cellulose. Their cultural conditions adequate for the cellulase formation and effects of inorganic salts and various organic substances added to the wheat bran media were investigated. The results obtained are as follows; 1. Optimum conditions for the cellulase formation were MC-9: pH 5.5, temp. $35^{\circ}C$, incubation time 5 days, MC-10: pH 5.5-6.0, temp. $30^{\circ}C$, incubation time 5 days, MC-53: pH 3.5, temp. $30^{\circ}C$, incubation time 5 days, MC-61: pH 3.5-4.0, temp. 30-$35^{\circ}C$, incubation time 5 days. 2. Their cellulase activity in their optimum conditions were MC-9: CMC-LP(liquefying power). 87.7%, CMC-SP(saccharifying power) 3.20 glucose mg./gm. of the cultures/min., MC-10: CMC-LP 82.9%, CMC-SP 2.48 glucose mg./gm. of the cultures/min., MC-53: CMC-LP 72.4%, CMC-SP 1.76 glucose mg./gm. of the cultures/min., MC-61: CMC-LP 87.1%, CMC-SP 2.08 glucose mg./gm. of the cultures/min. 3. Additions of inorganic salts to the wheat bran media were not significant for the cellulase formation, but additions of soybean film and orange-peel pomace promoted the CMC-liquefying power 3 to 5 percent in wheat bran cultures of the strains.

• Korean Journal of Food Science and Technology
• /
• v.14 no.1
• /
• pp.72-79
• /
• 1982

Several mutants were isolated from the parent strain of Aspergillus niger CF: the first mutant strain CF-11 was obtained by UV irradiation, and the second mutant strain CF-21 and CF-22 were from NTG (N-methyl-N'-nitroso-N-nitroso-guanidine) treatment on the CF-11. These mutants were characterized, and their enzyme and acid production on wheat bran Koji and wheat flour Koji were studied. Asp. niger CF-22 mutant appeared to be tan type which conidial heads were discolored. It's glucoamylase activity was inreased approximately two times and its ${\alpha}-amylase$ about 50 percent as compared with that of the parent strain of Asp. niger CF, when grown on wheat bran Koji under the optimal conditions. Asp. niger CF-21 mutant showed slower growth rate and poor sporulation than the wild type, although its conidial heads were not discolored. Approximately 4-fold increment in its acid production was observed as compared with the weld type. The activities of glucoamylase and ${\alpha}-amylase$ of the Asp. niger CF-22 and CF-21 mutants were higher than those of the wild type, but their protease activity was rather lower. The maximum production of glucoamylase by the Asp. niger CF-22 mutant was obtained after 2 to 3 days incubation on wheat bran at 30 to $35^{\circ}C;$ ${\alpha}-amylase$2 days incubation at 30 to $35^{\circ}C$. The maximal levels of acid production by the mutant CF-21 was appeared after 2 days incubation on wheat bran Koji, and after 3 days on wheat flour Koji at $30^{\circ}C$. Little differences in the levels of acid production were observed between on wheat bran and flour Koji.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.4
• /
• pp.361-373
• /
• 2015

This study was carried out to evaluate the antioxidant and antibacterial activities of Glycyrriza uralensis Fisher (Jecheon, Korea) extracts obtained by various extraction conditions (85% ethanol, heating temperatures and times), and to establish the optimal extraction condition of G. uralensis for the application as cosmetic ingredients. The extracts obtained under different conditions were concentrated and made in the powdered (sample-1) and were the crude extract solutions without concentration (sample-2). The antioxidant effects were determined by free radical scavenging activity ($FSC_{50}$), ROS scavenging activity ($OSC_{50}$), and cellular protective effects. Antibacterial activity was determined by minimum inhibitory concentration (MIC) on human skin flora. DPPH free radical scavenging activity of sample-1 ($100{\mu}g/mL$) was 10% higher in group extracted for 6 h than 12 h, but sample-2 didn't show any significant differences. The extraction yield extracted with same temperature for 12 h was 2.6 times higher than 6 h, but total flavonoid content was 1.1 times higher. These results indicated that total flavonoid content hardly increased with increasing extraction time. Free radical scavenging activity, ROS scavenging activity and cellular protective effects were not dependent on the yield of extraction, but total flavonoid content of extraction. Antibacterial activity on three skin flora (S. aureus, B. subtilis, P. acnes)of sample-1 in different extraction conditions were evaluated on same concentration, and the group extracted at 25 and $40^{\circ}C$ showed 16 times higher than methyl paraben ($2,500{\mu}g/mL$). In conclusion, 85% ethanol extracts of G. uralensis extracted at $40^{\circ}C$ for 6 h showed the highest antioxidant and antibacterial activity. These results indicate that the extraction condition is important to be optimized by comprehensive evaluation of extraction yield with various conditions, yield of active component, and activity test with concentrations, and activity of 100% extract, for manufacturing process of products.

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.413-418
• /
• 1998

Methoxy polyoxyethylene dodecanoates are a kind of nonionic surfactants obtainable from reaction of fatty acid methyl ester with ethylene oxide utilizing a solid catalyst. Methoxy polyoxyethylene dodecanoates have economical advantage compared with polyoxyethylene dodecyl ethers using fatty alcohol. In this work, the solubilizing capacity concerned with phase behavior of ternary systems composed of nonionic surfactant/water/oil, interfacial tension and detergency at the phase inversion temperature(PIT) were investigated and compared with those of polyoxyethylene dodecyl ethers in order to confirm the applicability of methoxy polyoxyethylene dodecanoates in the detergents. Methoxy polyoxyethylene dodecanoates showed the solubilizing capacity of 10~18% for hexadecane which were about 6% higher than polyoxyethylene dodecyl ethers. At the PIT condition, methoxy polyoxyethylene dodecanoates' interfacial tension were 0.0124~0.0176 dyne/cm while polyoxyethylene dodecyl ethers have the value of 0.013~0.0163 dyne/cm and methoxy polyoxyethylene dodecanoates showed higher detergency of 82.1~83.2% than polyoxyethylene dodecyl ethers of 76.5~77.3%. The good detergency performance of methoxy polyoxyethylene dodecanoates would be due to the higher oil solubilizing power and lower interfacial tension than polyoxyethylene dodecyl ethers at the PIT condition.