• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.4
• /
• pp.94-100
• /
• 2004

A dynamic finite element analysis of a rig test model for truck chassis systems is conducted to establish an appropriate model designed to predict the fatigue life. A reference Belgian road input, which has been obtained from a field test, is imposed on the finite element model in the modal finite element analysis, and the resulting strain history is employed for the prediction of the fatigue life. This is compared with the prediction based upon the strain history measured in the field test. The two agree with each other within the limitation of the field data and the input data to the model. The high frequency responses over 50 Hz are confirmed to be negligible as far as their effect on the fatigue life is concerned.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.900-903
• /
• 2002

This study dealt with the experimental modal analysis of the perforated rectangular plate coupled with fluid. The natural frequencies of the perforated plate and solid plate in air were obtained by the analytical method based on the relation between the reference kinetic and maximum potential energy and compared with the experimental results. Good agreement between the results was found for the natural frequencies of the perforated plate in air. It was empirically found the natural frequencies of the perforated plate coupled with fluid. The transverse vibration modes, in-phase and out-of-phase, were observed alternately in the fluid-coupled system. Additionally, the effect of distance between perforated plate and solid plate on the fluid-coupled natural frequency was investigated.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1989.10a
• /
• pp.51-58
• /
• 1989

In this paper, the technique of particular harmonics elimination in three-phase PWM Inver-ter output waveform and the method for speed control of a squirrel cage I.M. are introduces. The required switching patterns are determind on personal computer and the results are stored in look-up table in EPROM for controlling the switching of the Inverter devices. In this system, the microprocessor(Intel 8086)computes the actual Motor speed from the pulses generated in a Incremental Encoder, compares the actual speed with the reference speed. And the PI(Proportional-Integral) controller is used to adjust the frequency of the Inverter that feeds the Motor.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.3
• /
• pp.88-94
• /
• 1997

This paper presents the sliding mode observer-model following (SMO-MF) power system stabilizer(PSS) for unmeasurable state variables. This SMO-MF PSS is obtained by combining the sliding mode-model following (SM-MF) including closed-loop feedback(CLF) with the full-order observer(FOO). The control input of the proposed MO-MF PSS is derived by Lyapunov's second method to determine a control input that keeps the system stable for unmeasurable plant state variables. Simulation results show that the proposed SMO-MF PSS including CLF is able to reduce the low frequency oscillation and to achieve asymptotic tracking error between the reference mode state and the estimated plant state at different initial conditions.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.4
• /
• pp.53-58
• /
• 1997

In this paper, the power system stabilizer(PSS) using the sliding mode observer-model following(SMO-MF) with closed-loop feedback (CLF) for single machine system is extended to multimachine system. This a multimachine SMO-MF PSS for unmeasureable plant state variable is obtained by combining the sliding mode-model following(SM-MF) including closed-loop feedback(CLF) with the full-order observer(FOO). And the estimated control input for unmeasurable plant sate variables is derived by Lyapunov's second method to determine a control input that keeps the system stable. Time domain simulation results for the torque angle and for the angular velocity show that the proposed multimachine SMO-MF PSS including CLF for unmeasurable plant sate variables is able to damp out the low frequency oscillation and to achieve asymptotic tracking error between the reference model state at different initial conditions and at step input.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.327-331
• /
• 2008

The problems of power factor and harmonics are occurred in converter system which used to SCRs and diodes as power semiconductor devices IGBT was solved that problem, maintain the input line current with sinusoidal wave current of input power source voltage. In this paper, three phase AC to DC boost converter that operates with unity power factor and sinusoidal input currents is presented. The current control of the converter is based on the space vector PWM strategy with fixed switching frequency and the input current tracks the reference current within one sampling time interval. Space vector PWM strategy for current control was materialized as a digital control method. By using this control strategy low ripples in the output voltage, low harmonics in the input current and fast dynamic responses are achieved with a small capacitance in the dc link.

• Journal of Power Electronics
• /
• v.9 no.4
• /
• pp.582-592
• /
• 2009

This paper proposes a new speed sensorless direct torque and flux controlled interior permanent magnet synchronous motor (IPMSM) drive. Closed-loop control of both the torque and stator flux linkage are achieved by using two proportional-integral (PI) controllers. The reference voltage vectors are generated by a SVM unit. The drive uses an adaptive sliding mode observer for joint stator flux and rotor speed estimation. Global asymptotic stability of the observer is achieved via Lyapunov analysis. At low speeds, the observer is combined with the high frequency signal injection technique for stable operation down to standstill. Hence, the sensorless drive is capable of exhibiting high dynamic and steady-state performances over a wide speed range. The operating range of the direct torque and flux controlled (DTFC) drive is extended into the high speed region by incorporating field weakening. Experimental results confirm the effectiveness of the proposed method.

• Korean Journal of Optics and Photonics
• /
• v.20 no.6
• /
• pp.361-365
• /
• 2009

We describe a simple method to obtain an optical sectioning in a conventional wide-field microscope by projecting a single spatial frequency grid pattern onto the object. Using a patterned beam, we have measured the height of BGA with a rough surface that provide the coherence noise. The configuration of the height measurement system using pattern beam is simple. The image acquired by this system is not depend on the coherence noises. This system is also applicable to the sample reference plan that has no pattern on ground. The reappearance and accuracy are outstanding and applicable to many industrial optical metrology.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.1
• /
• pp.58-61
• /
• 2003

A loop power system has a nonlinear characteristics. Also it is very hard to analyse through a equation if a discontinuous characteristic of the ULTC is added to a system. However, the problem which is hard to analyse by equations can acquire the useful result with what use the genetic algorithm (GA) which is a multi-point search program. In this paper, we proved through a simulation that the proposed method can reduce an operation frequency of tap changers and improving the quality of voltage of the buses by decreasing the deviation between the actual voltage and the reference voltage through the coordinated control of the ULTC that use GA in the loop power system.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.2
• /
• pp.522-533
• /
• 1999

This paper proposes speaker recognition algorithm which includes both the pitch parameter and the fuzzy inference. This study proposes a pitch detection method PVPF(peak and valley pitch detection fuction) by means of comparing spectra which utilizes the transform characteristics between time and frequency. In this paper, makes reference pattern using membership function and performs vocal tract recognition of common character using fuzzy pattern matching in order to include time variation width for non-linear utterance time.