• Journal of Electrical Engineering and Technology
• /
• 제3권1호
• /
• pp.94-100
• /
• 2008

This paper presents a new control method of single-phase active power filter (APF) for the compensation of harmonic current components in nonlinear loads. To facilitate the possibility of complex calculation for harmonic current detection of the single phase, a single-phase system that has two phases was constructed by including an imaginary second-phase giving time delay to the load current. The imaginary phase, which lagged the load current T/4 (Here T is the fundamental cycle) is used in the conventional method. But in this proposed method, the new signal as the second phase is delayed by the filter. Because this control method is applied to a single-phase system, an instantaneous calculation was developed by using the rotating reference frames synchronized to source-frequency rather than by applying instantaneous reactive power theory that uses the conventional fixed reference frames. The control scheme of single-phase APF for the current source with R-L loads is applied to a laboratory prototype to verify the proposed control method.

• 전력전자학회논문지
• /
• 제20권4호
• /
• pp.356-362
• /
• 2015

This paper presents a current control strategy in the synchronous reference frame for a single-phase PWM converter, which ensures sinusoidal input current control under the distorted source voltage and frequency condition. Given that the distorted source voltage distorts the phase angle for PWM converter control, the input current contains the same harmonics as the source voltage. Aside from the distorted voltage, the variation in source frequency reduces the performance of input current control. To achieve sinusoidal input current control under the distorted source voltage and frequency condition, this paper proposes a compensation strategy of current reference with the distortion component extracted from the phase angle and a detection strategy of frequency variation from the output of a synchronous reference frame phase-lock loop. The experimental results confirm the validity of the proposed method under the distorted source voltage and frequency condition.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.187-190
• /
• 1998

In this paper, a synchronization method of OFDM signals are introduced and its performance is estimated. A proposed method can perform a frame/symbol timing, carrier frequency synchronizations. Reference symbols consist of two duplicate OFDM symbols carrying signals on every sub-carriers. Performances of synchronization under 60GHz millimeter-wave indoor channels are evaluated, which were measured with frequency-sweeping method in common office buildings. A proposed method has improved performances owing to long averaging durations of synchronization metrics in frame/symbol timing, carrier frequency synchronization procedures.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.263-268
• /
• 2000

본 논문에서는 고조파 소음을 내는 시스템의기본 주파수 추정을 통한 새로운 피드백 능동소음제어 방법을 제안한다. 기존신호를 측정하기 어려운 상황에서 종래의 다중 정현파 소음의 능동제어 방법은 기준신호를 측정하는 대신 추정된 주파수를 이용하여 기준신호를 만들어낸다. 그러나 비팅현상(beating phenomenon)이 존재할 때는 순간적으로 특정 주파수 성분이 사라지게 되므로 적응 주파수 추정이 어렵게 되어 비팅현상에 의한 주파수 추정에서의 혼돈을 만들어진 기준신호를 쓸모없게 만든다. 제안된 알고리즘은 두 가지 부분으로 구성된다. 첫째는 기본주파수 추정을 이용한 기준신호 발생기이고 둘째는 기존의 피드포워드 제어부분이다. 제안된 결정 규칙을 이용한 기본주파수 추정알고리즘은 비팅현상에 둔감할 뿐 아니라 기존의 직렬형 적응노치필터 방법에 비해 좋은 추종성능과 적은 주파수 추정 오차의 분산을 갖는다. 더욱이 신호대잡음비가 좋지 않아 기존의 주파수 검증하기 위해서 실측한 선박의 객실 소음과 자동차의 시변하는 엔진부밍소음에 대해서 모의 실험을 수해한다.

• 전기학회논문지
• /
• 제65권10호
• /
• pp.1774-1779
• /
• 2016

This paper proposes a portable cable fault detection system with automatic fault distinction and distance measurement using time-frequency correlation and reference signal elimination method and automatic fault classification algorithm in order to have more accurate fault determination and location detection than conventional time domain refelectometry (TDR) system despite increased signal attenuation due to the long distance to cable fault location. The performance of the developed system method was validated via an experiment in the test field constructed for the standardized performance test of power cable fault location equipments. The performance evaluation showed that accuracy of the developed system is less than 1.34%. Also, an error of automatic fault type and location by detection of phase and peak value through elimination of the reference signal and normalization of correlation coefficient and automatic fault classification algorithm not occurred.

• 제어로봇시스템학회논문지
• /
• 제15권5호
• /
• pp.548-554
• /
• 2009

We propose an automatic inspection system for hologram with multiple patterns. The system hardware consists of illuminations, camera, and vision processor. Multiple illuminations using LEDs are arranged in different directions to acquire each image of patterns. The system software consists of pre-processing, pattern generation, and pattern matching. The acquired images of input hologram are compared with their reference patterns by developed matching algorithm. To compensate for the positioning error of input hologram, reference patterns of hologram for different position should be generated in on-line. We apply a frequency transformation based CGH(computer-generated hologram) method to generate reference images. For the fast pattern matching, we also apply the matching method in the frequency domain. Experimental results for hologram of Korean currency are then presented to verify the usefulness of proposed system.

• 한국ITS학회 논문지
• /
• 제5권1호
• /
• pp.45-54
• /
• 2006

주파수 선택적 채널에서의 신호왜곡은 수신기에서의 채널추정을 어렵게 하여 펄스 타입의 UWB 시스템의 경우 동기 회로의 구현이 어렵다는 단점이 있다. 본 논문에서는 구현상 난점인 채널추정과 동기회로 설계를 간단히 기준 펄스를 함께 전송함으로써 해결하는 TR(Transmitted Reference), DTR(Differential TR) UWB을 분석하고 FSK 변조방법을 이용한 새로운 형태의 PRM(Pulse Repetition Modulation) UWB 방식을 제안한다. 기준 펄스를 이용한 통신의 수신기 구조인 Auto-correlation(AcR) 수신기가 잡음이 섞인 기준펄스를 이용하는 경우 성능저하 정도를 확률적으로 분석한다. 또한 SNR에 영향을 미치는 AcR 적분기의 적분구간에 대한 분석을 시뮬레이션을 통하여 분석한다.

• 한국통신학회논문지
• /
• 제37권1A호
• /
• pp.73-81
• /
• 2012

본 논문에서는 DRM(Digital Radio Mondiale) 수신기를 위한 고속 동기화 방식을 제안한다. 제안하는 방식에서는 DRM 수신기에서 요구하는 고속 수신 성능을 만족시키기 위해 기존 동기화 방식에서 수행하는 초기 샘플링 주파수 동기과정을 생략하고 정수배 주파수(Integer Frequency) 동기 및 프레임(Frame) 검출을 수행한 후, 추적(Tracking) 과정에서 샘플링 주파수 동기를 수행한다. 샘플링 주파수 옵셋(Sampling Frequency Offset)이 포함된 OFDM(Orthogonal Frequency Division Multiplexing) 복조 심볼로부터 프레임 옵셋을 추정하기 위해 참조셀(Reference cell)에 상관 기반 추정 알고리즘을 적용하고 그 성능을 분석하여 샘플링 주파수 옵셋에 강한 알고리즘을 선정한다. 제안된 구조는 DRM 수신 신호에 샘플링 주파수 옵셋이 존재하는 경우에도 초기 샘플링 주파수 동기화 과정에 소요되는 시간을 단축할 수 있으며, 참조셀간 차동 상관(Inter-cell Differential Correlation) 기법을 사용할 경우 초기 샘플링 주파수 옵셋의 영향에 강인함을 프레임 검출 모의실험을 통해 확인한다.

• 신재생에너지
• /
• 제20권2호
• /
• pp.55-64
• /
• 2024

To ensure the frequency stability of wind power generation, we analyzedd the existing technology and proposedd a method for changing the gain value with respect to to the rotor speed by adding the MPPT reference value and output reference value that reflect the system frequency. The MPPT control and output were compared and calculated for performance verification. Subsequently, the application of the proposed algorithm led to an increased output when compared with that of the existing control method.

• Journal of Power Electronics
• /
• 제9권5호
• /
• pp.718-725
• /
• 2009

To get instantaneous reference data in a single power system with vector space phasors, the instantaneous load current is adopted as a phase and another new signal, which is delayed through filtering by the phase-delay property of a low-pass filter, is used as the secondary phase. Because the two-phases have a different phase, the instantaneous value of the harmonic current can be obtained without a time-delay in calculation. The reference voltage is created by multiplying the coefficient k by the compensation current using the rotating reference frame synchronized with the source-frequency. To verify the validity of the proposed control method, experiments are carried out on a prototype of the single-phase hybrid active power filter system.