• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.1006-1009
• /
• 2000

In this study, a multi-step optimization technique combined with a simple genetic algorithm is introduced in order to minimize the static compliance, the dynamic compliance, and the weight of a high speed machining center simultaneously. Dimensional thicknesses of the eight structural members on the static force loop are adopted as design variables. The first optimization step is a static design optimization, in which the static compliance and the weight are minimized under some dimensional and safety constraints. The second step is a dynamic design optimization, where the dynamic compliance and the weight are minimized under the same constraints. After optimization, the weight of the moving body only was reduced to 57.75% and the weight of the whole machining center was reduced to 46.2% of the initial design respectively. Both static and dynamic compliances of the optimum design are also in the feasible range even though they were slightly increased than before.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.17 no.4
• /
• pp.478-486
• /
• 2010

Purpose: To explore nurses' compliance with standards for critical care nursing practice in intensive care units (ICUs) and to provide basic data for high quality of critical care nursing. Method: A total of 616 participants from 61 ICUs which are graded from 1 to 7 throughout the nation were surveyed. Data were collected from February 9 to February 27, 2009 using a questionnaire consisting of 58 questions including 50 nursing activities as indicators. Results: The rate of ICU nurses' compliance with standards for critical care nursing practice was high. As for individual standards, compliance with the standard of assessment was the highest, followed by implementation, diagnosis, and planning in that order. There were differences in compliance according to nurses' ICU experience, work place (unit), and ICU grade. A shortage of manpower was considered as a main cause for noncompliance. Conclusion: The present compliance rate with standards for critical care nursing practice by ICU nurses was identified. Therefore, compliance rate can be used to promote quality of critical care nursing and development of educational programs for ICU nurses.

• Journal of Korean Academy of Rural Health Nursing
• /
• v.9 no.2
• /
• pp.45-58
• /
• 2014

Purpose: To determine the knowledge and treatment compliance with hypertension, directions for the aspects of implementation, and related factors to patients with hypertension using Primary Health Cares and Private Clinics Hospitals. Method: General characteristics and High blood pressure-related properties(17 questions), Hypertension knowledge measures(20 questions), and Treatment Compliance(22 questions) were used. Result: 1. The patients of Private Clinics Hospitals had statistically significantly higher drinking habits than Primary Health Care centers. The patients of Private Clinics Hospitals had statistically significantly higher rate of no family history of hypertension than Primary Health Care centers. 2. Primary Health Care centers had statistically significantly higher knowledge of hypertension than Private Clinics Hospitals. Primary Health Care centers had statistically significantly higher treatment compliance than Private Clinics Hospitals. Conclusion: Both Primary Health Care centers and Private Clinics Hospitals are high medication compliance but low lifestyle compliance with hypertension. We need to recognize the importance of lifestyle compliance, to apply proper programs and to provide therapists' aggressive intervention.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.2
• /
• pp.162-169
• /
• 2008

Compliance effect consideration method for real-time multibody vehicle dynamics is proposed using quasi-static analysis. The multibody vehicle model without bush elements is used based on the subsystem synthesis method which provides real-time computation on the multibody vehicle model. Reaction forces are computed in the suspension subsystem. According to deformation from the quasi-static analysis using reaction forces and bush stiffness, suspension hardpoint locations and suspension linkage orientation are changed. To validate the proposed method, quarter car simulations of McPherson strut and multilink suspension subsystems are performed. Full car bump run simulations and fish hook handling test simulations are also carried out comparing with the ADAMS vehicle model with bush elements. CPU times are also measured to see the real-time capabilities of the proposed method.

• Journal of Korean Academy of Nursing
• /
• v.36 no.1
• /
• pp.64-73
• /
• 2006

Purpose: This study was done to investigate correlations between compliance and physiological parameters of hemodialysis patients. Method: The subjects were 102 patients on hemodialysis at 3 hospitals in B city. Data was collected using Shon(l986)'s questionnaire and measuring physiological parameters (serum urea nitrogen, creatinine, hemoglobin, albumin, potassium, phosphorus, interdialytic weight gain). Result: Mean scores of compliance with the therapeutic regimen was $4.00\pm$ 0.55 on a 5 point scale. The area of visiting hospitals and taking medicines . were shown to have high compliance with therapeutic regimens; on the other hand, the areas concerning diet and symptoms were shown to be low. Interdialytic weight gain and phosphorus were significantly related to the compliance with therapeutic regimens. Conclusion: Hemodialysis patients' therapeutic compliance was related to the physiological parameters(potassium, phosphorus, interdialytic weight gain). Therefore, these findings give hemodialysis patients useful information for raising their therapeutic compliance.

• Journal of Welding and Joining
• /
• v.15 no.4
• /
• pp.178-186
• /
• 1997

The purpose of this study is to evaluate the J-R curve characteristics for the 5083 aluminum alloy weldment by the load ratio analysis. The results of the load ratio analysis are compared with those of the J-R curve which are obtained by the ASTM unloading compliance method. The crack length calculated by the load ratio analysis is agrees well with the measured final crack length. The slope of the exponential J-R curve estimated by the load ratio analysis is slightly smaller than that by the ASTM unloading compliance method. The exponential correlation of the J-R curve for the 5083 aluminum alloy base metal by the load ratio analysis is J = 93.88 ${\Delta}{\alpha}^{0.375}$. That for the weld metal and HAZ is J = 69.87 ${\Delta}{\alpha}^{0.389}$ and J = 70.59 ${\Delta}{\alpha}^{0.359}$ respectively. The J-R curve obtained by the ASTM unloading compliance method is overpredicted and should be offsetted due to the initial negative crack. On the other hand, the load ratio analysis method can evaluate the J-R curve by only load displacement curve without particular crack measurement equipment.

• Journal of Power System Engineering
• /
• v.1 no.1
• /
• pp.80-90
• /
• 1997

The purpose of this study is to evaluate the validity examination of the J-R curve characteristics for the nuclear reactor pressure vessel steels and Al alloys by the load ratio analysis. The results of the load ratio analysis are compared with those of the J-R curve which are obtained by the ASTM unloading compliance method. The crack length calculated by the load ratio analysis is agree well with the measured final crack length. The slope of the exponential J-R curve estimated by the load ratio analysis is slightly smaller than that by the ASTM unloading compliance method. The J-R curve obtained by the ASTM unloading compliance method is over-predicted and should be offsetted due to the initial negative crack. On the other hand, the load ratio analysis method can evaluate the J-R curve by only load-displacement curve without particular crack measurement equipment.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.12 no.2
• /
• pp.223-230
• /
• 2005

Purpose: This study was done to investigate compliance with health behaviors among patients who are hypertensive. Method: The participants in this study were 121 outpatients with hypertension. Compliance with health behaviors was measured using a questionnaire developed by the researchers. Data were analyzed using t-test, ANOVA, Duncan's multiple range test and chi square test. Results: According to tile general characteristics of the participants, compliance with medication and diet was higher among women than men, among high school graduates than middle school graduates or those with lower academic qualifications, and among those who were unemployed compared to those who were employed. Compliance with alcohol abstinence or not smoking was higher among women than men, and among those who were unemployed compared to those who were employed. According to the risk factors of hypertension, compliance with health behaviors was significantly higher in those who had associated diseases. The participants in the group with a hypertension morbidity period longer than 10 years did exercise more than 3 times a week and regularly weighed themselves once or more a week. The item showing highest compliance concerning medication and diet was 'Take prescribed drugs regularly', while the one showing lowest was 'Take drugs with knowledge about their side effects'.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1003-1008
• /
• 2007

Compliance effect consideration method for real-time multibody vehicle dynamics is proposed using quasi-static analysis. The multibody vehicle model without bush elements is used based on the subsystem synthesis method which provides real-time computation on the multibody vehicle model. Reaction forces are computed in the suspension subsystem. According to deformation from the quasi-static analysis using reaction forces and bush stiffness, suspension hardpoint locations and suspension linkage orientation are changed. To validate the proposed method, quarter car simulations of McPherson strut and multilink suspension subsystems. Full car bump run simulations are also carried out comparing with the ADAMS vehicle model with bush elements. CPU times are also measured to see the real-time capabilities of the proposed method.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.192-198
• /
• 2003

A finite element analysis of end-to-end artery/PTFE anastomosis has been presented in this study to evaluate the distribution of compliance and stresses in the vicinity of the anastomosis due to any mismatch in compliance characteristics. The artery wall was assumed to be made of linear isotropic material in this simplified model and a nonlinear analysis and convergency study with respect to increasing meshed element numbers were performed with a mean artery pressure loading of the artery-PTFE model. Also, sub-modeling method was Introduced to progress the accuracy of the finite element analysis. The results are as follow : 1. A hypercompliant zone on the artery side was observed around 4.Omm from the anastomosis and a high hoop stresses in the wall of artery and PTFE was dominant. 2. An artery displays large deformation so that nonlinear analysis and sub-modeling method was used. 3. An anastomosis with the thinner thickness and larger diameter PTFE (B type) could reduce the compliance disagreement.