• 한국자동차공학회논문집
• /
• 제22권3호
• /
• pp.194-202
• /
• 2014

Steering axis of suspensions is an important factor that affects ride and handling quality in the vehicle chassis development. Macpherson strut and double wishbone's steering axis are defined geometrically, but multi-link suspensions can not be geometrically analyzed. In this case instant axis theory is commonly used to find a steering axis. Since the steering axis is moving with varying caster and kingpin inclination angle, this method approximately corresponds with exact solution. In this paper, we propose a velocity analysis method to find a pure rotational axis of the wheel relative to suspension arms, that is exact solution of the steering axis. This paper extends the method to analyze the steering axis of multi-link suspensions with bushing compliance. The analysis results applied to double wishbone and multi-link suspensions demonstrate validity and accuracy of the proposed method.

• 한국안전학회지
• /
• 제16권4호
• /
• pp.14-21
• /
• 2001

SG-365 steel is an important material End used for manufacturing a pressure vessel and gas piping. In this investigation, the elastic plastic fracture toughness of this material is evaluated by the unloading compliance method according to the ASTM E8l3-97 and E1152-97 method on the smooth and side groove In specimens. The effect of smooth and side groove is studied on the elastic plastic fracture toughness. The side grooved specimen is very useful in estimation of the $J_{IC}$. Because it is much easier than the smooth specimen to the onset of the ductile tearing by the R curve method. Besides. it improves the accuracy of toughness values, decreases the scattering of them and crack tunneling effect and shear lip by the side groove.

• 한국해양공학회지
• /
• 제15권3호
• /
• pp.63-68
• /
• 2001

SG-365 steel is an important material and used for manufacturing a pressure vessel which the gas piping. In this investigation, the elastic plastic fracture toughness of this material is evaluated by the an unloading compliance method according to the ATM E813-97 method on the smooth and side groove 1CT specimens. The effect of smooth and side groove is studied on the elastic plastic fracture toughness. The side grooved specimen is very useful in estimation of the $J_IC. Because it is much easier than the smooth specimen to the onset of the ductile tearing by the R curve method. Besides, it improves the accuracy of toughness values, decreases the scattering of them and tunneling and shear lip by the side groove.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.350-356
• /
• 2001

SG-50 steel is an important material and used for manufacturing a pressure vessel which the gas piping. In this investigation, the elastic plastic fracture toughness of this material is evaluated by the an unloading compliance method according to the ASTM E813-97 and E1152-97 method on the smooth and side groove 1CT specimens. The effect of smooth and side groove is studied on the elastic plastic fracture toughness. The side grooved specimen is very useful in estimation of the J$_{IC}$. Because it is much easier than the smooth specimen to the onset of the ductile tearing by the R curve method. Besides, it improves the accuracy of toughness values, decreases the scattering of them and tunneling and shear lip by the side groove.e.

• 동력기계공학회지
• /
• 제11권1호
• /
• pp.127-133
• /
• 2007

SG-365 steel is an important material and used for manufacturing a pressure vessel which the gas piping. In this investigation, the elastic plastic fracture toughness of this material is evaluated by the unloading compliance method according to the ASTM E813-97 and E1152-97 method on the smooth and side groove 1CT specimens. The effect of smooth and side groove is studied on the elastic plastic fracture toughness. The side grooved specimen is very useful in estimation of the $J_{IC}$. It is much easier than the smooth specimen to the onset of the ductile tearing by the R curve method. Besides, it improves the accuracy of toughness values, decreases a phenomenon of the tunneling and shear lip by the side groove.

• 간호행정학회지
• /
• 제3권1호
• /
• pp.107-118
• /
• 1997

This study was designed to obtain basic data for development of evaluation tool which would be needed to measure the outcome of general quality nursing care of individual patient. The purpose of this study was to analyze and classify the outcome indicators of quality nursing care. The 29 articles of quality nursing care and outcome measures were selected coveniently, and analyzed to classify the outcome indicators of quality nursing care using open coding method. The results of this study were as follows: 1. Quality nursing care was defined as level of excellence of nursing care to achieve good patient outcome. 2. The 6 domains of which were health status, satisfaction, self care, patient progress and prognosis, and compliance were identified in outcome indicators of quality nursing care 3. Seven indicators of health status domain which were perceived health status, quality of life, well-being, daily activities, physical-physiological status, psychoemotional status, and social role functioning were identified. 4. Two indicators of satifaction domain which were patient satisfaction and family satisfaction were identified. 5. Three indicators of self care domain which were skill, knowledge, and home management were identified. 6. Seven indicators of patient progress and prognosis domain which were change of clinical status, resolution of nursing diagnosis and problem, days of stay, dicahrge state, recovery state, survival were identified. 7. compliance with therapeutic direction compliance was identified as an indicator of compliance domain. 8. It was sugested that studies for development of evaluation tools for outcomes of quality nursing the results of this study could be executed

• 기본간호학회지
• /
• 제15권2호
• /
• pp.153-160
• /
• 2008

Purpose: This study was done to examine the level of compliance and the relation of related factors of nosocomial infection control among nurses in emergency rooms. The data will provide fundamental information for developing programs for nosocomial infection control in the emergency room. Method: Study participants were 183 nurses working in emergency rooms in general hospitals that had more than 500 beds and were located in Daegu, Daejeun, and Pusan. The survey was carried out from March 7 to March 26, 2006 and a structured questionnaire was used. Descriptive statistics, t-test, ANOVA and Sheffe test with SPSS 14.0 were used to analyze the data. Results: The average level for practice of infection control was relatively low Levels of compliance were high when the participants had: 1) regular conferences for nosocomial infection control, 2) positive perception of protection devices, 3) knowledge of whom to report and experiences of reporting needle stick injuries, 4) hospital guidelines for infection control and 5) enough equipment supplies from the hospital. Conclusion: Nosocomial infection control among emergency room nurses could be improved via personal, psychosocial, and organizational factors and related education.

• 한국안전학회지
• /
• 제39권1호
• /
• pp.114-122
• /
• 2024

This study aimed to identify the multiple mediation effects of job satisfaction and job commitment on the relationships between job stress and workers' safety behavior in terms of compliance and participation, in which the multiple mediation effects are a hybrid of parallel and serial mediating relationships. The multiple mediation model was analyzed using the bootstrapping method through the PROCESS macro tool in SPSS. The results showed that job stress negatively affects job satisfaction, job commitment, and workers' safety behavior, and the relationship between job stress and safety behavior is mediated by both job satisfaction and job commitment. The serial mediation effects of job satisfaction and job commitment were also found to be statistically significant in the regression relationship between job stress and safety behavior. Further analysis of the compliance and participation subdimensions of safety behavior showed similar results. Specifically, the serial mediation effects of job satisfaction and job commitment on participation and compliance behavior were further supported; however, the mediation effect of job satisfaction was not significant, whereas that of job commitment did remain significant. Further research is needed to determine if the mediation effect of job satisfaction found in this study can be extended and generalized to workers in various fields and industries.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권3호
• /
• pp.399-409
• /
• 2021

This study examines whether oil and gas companies comply with the requirements of the International Financial Reporting Standards (IFRS) 6 on Exploration and Evaluation (E&E) of Mineral Resources. For this purpose, a comprehensive checklist divided into eight different parameters was prepared by including every requirement of IFRS 6. While building on the previous studies, the annual reports of the top five Indian and top five Global companies engaged in this business have been investigated in detail against the checklist using content analysis as the research method. Results show that a majority of the companies (both Indian as well as global companies) have not been complying with the requirements of IFRS 6. In five out of eight parameters the companies have not complied with even half of the requirements. The overall compliance ratio is as low as 41.54 percent and 43.68 percent for Indian and Global companies respectively. While analyzing the non-compliance, it has been observed that despite having distinct accounting standards, different kinds of companies are reporting differently. Thus, it is not in line or consistent with the goal of IFRS i.e., to establish a universal language for the companies to prepare the accounting statements. The research findings identify the exact area of non-compliance while citing the relevant paragraph number of IFRS 6.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.443-448
• /
• 2000

In this paper, multiphase optimization of machine structure is presented. The goal of first step is to obtain (i) light weight, (ii) rigidity statically. In this step, multiple optimization problem with two objective functions is treated using Pareto Genetic Algorithm. Where two objective functions are weight of the structure, and static compliance. The method is applied to a new machine structure design.