• Journal of Korean Society of Forest Science
• /
• v.103 no.3
• /
• pp.446-452
• /
• 2014

This research aimed to provide a method to estimate growing stock and carbon stock using the characteristics of forest type map such as the age-class, DBH class and crown density class. We transformed the growing stock data of national forest inventory (mainly Kangwon-do province) onto those of time when the forest type map was established. We developed a simulation model for the growing stock using the transformed data and the characteristics of forest type map by the quantification method I. By comparing partial correlation coefficient, we found that quantification of growing stock was largely affected by age-class followed by crown density class, forest type and DBH class. The growing stock, was estimated as minimum in the broadleaved forest with age-class II, DBH class 'Small', and crown density class 'Low' as $20.0m^3/ha$, whereas showed maximum value in the coniferous forest with age-class VI, DBH class 'Large', and crown density class 'High' as $305.0m^3/ha$. The growing stock for coniferous, broadleaved, and mixed forest were estimated as $30.5{\sim}305.0m^3/ha$, $20.0{\sim}200.4m^3/ha$, and $23.8{\sim}238.1m^3/ha$, respectively. When we compared the carbon stock by forest type, the carbon stock by age class based on growing stock was maximum when DBH class was 'Large' and crown density class was 'High' regardless of forest type. This estimation of growing stock by using characteristic of forest type can be used to estimate the changes in growing stock and carbon stock resulting from deforestation or natural disaster. In addition, we hope it provide a useful advice when forest officials and policy makers have to make decisions in regard to forest management.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.2
• /
• pp.19-24
• /
• 2004

Introduction : The Vaginal, the urethra, the vulva and anal cancer avoid the many dose to femur head and the additional treatment is necessary in inguinal LN. The partial transmission block to use inguinal LN addition there is to a method which it treats and produce partial transmission block a method and the MLC which to it analyzes. Material & Methode : The Inguinal the LN treatment patient partial transmission it used block and the MLC in the object and with solid water phantom with the patient it reappeared the same depth. In order to analyze the error of the junction the EDR2 (Extended dose range, the Kodak and the U.S) it used the Film and it got film scanner it got the beam profile. The partial transmission block and the MLC bias characteristic, accuracy and stability of production for, it shared at hour and comparison it analyzed. Result : The partial the transmission block compares in the MLC and the block production is difficult and production hour also above 1 hours. The custom the block the place where it revises the error of the junction is a difficult problem. If use of the MLC the fabrication will be break and only the periodical calibration of the MLC it will do and it will be able to use easily. Conclusion : The Inguinal there is to LN treatment and partial transmission block and the MLC there is efficiency of each one but there is a place where the junction of block for partial transmission block the production hour is caught long and it fixes and a point where the control of the block is difficult. like this problem it transfers with the MLC and if it treats, it means the effective treatment will be possible.

• Journal of Korea Multimedia Society
• /
• v.10 no.10
• /
• pp.1310-1318
• /
• 2007

First of all, What was the modeling technique used to model 3D-Game character? It's a technique developed along several years, by experience... here is the bases Low polygons characters I always work in low polygon for two reasons -You can easily modify a low-poly character, change shapes, make morph for facial expressions etc -You can easily animate a low-poly character When the modeling is finished, Second, In these days, Computer hardware technologies have been bring about that expansion of various 3D digital motion pictured information and development. 3D digital techniques can be used to be diversity in Animation, Virtual-Reality, Movie, Advertisement, Game and so on. Besides, as computing power has been better and higher, the development of 3D Animations and Character are required gradually. In order to satisfy the requirement, Research about how to make 3D Game modeling that represents Character's emotions, sensibilities, is beginning to set its appearance. 3D characters in 3D Games are the core for the communications of emotion and the informations through their facial expression and characteristic motions, Sounds to Users. All concerning about 3D motion and facial expression are getting higher with extension of frequency in use. Therefore, in this study we suggest the effective method of modeling for 3D character and which are based on 2D Graphics.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.1-14
• /
• 1998

In this paper, Antenna, LNA, Mixer, VCO, and Modulation/Demodulation in Baseband processor which are the RF main components in Wireless LAN system for ultra high-speed communications network are studied. Antenna bandwidth and selective fading due to multipath can be major obstacles in high speed digital communications. To solve this problem, wide band MSA which has loop-structure magnetic antenna characteristics is designed. Distributed mixer using dual-gate GaAs MESFET can achieve over 10dB LO/RF isolation without hybrid, and minimize circuit size. As linear mixing signal is produced, distortions can be decreased at baseband signals. Conversion gain is achieved by mixing and amplification simultaneously. Mixer is designed to have wide band characteristics using distributed amplifier. In VCO design, Oscillator design method by large signal analysis is used to produce stable signal. Modulation/Demodulation system in baseband processor, DS/SS technique which is robust against noise and interference is used to eliminate the effect of multipath propagation. DQPSK modulation technique with M-sequences for wideband PN spreading signals is adopted because of BER characteristic and high speed digital signal transmission.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.639-645
• /
• 2018

This paper is intended to develop a decision model that can be applied to autonomous vehicles and autonomous mobile vehicles. The developed module has an independent configuration for application in various driving environments and is based on a platform for organically operating them. Each module is studied for decision making on lane changes and for securing safety through reinforcement learning using a deep learning technique. The autonomous mobile moving body operating to change the driving state has a characteristic where the next operation of the mobile body can be determined only if the definition of the speed determination model (according to its functions) and the lane change decision are correctly preceded. Also, if all the moving bodies traveling on a general road are equipped with an autonomous driving function, it is difficult to consider the factors that may occur between each mobile unit from unexpected environmental changes. Considering these factors, we applied the decision model to the platform and studied the lane change decision system for implementation of the platform. We studied the decision model using a modular learning method to reduce system complexity, to reduce the learning time, and to consider model replacement.

• Weed & Turfgrass Science
• /
• v.6 no.3
• /
• pp.196-202
• /
• 2017

This study was conducted to investigate the change of yield and quality according to seeding time and planting density and to determine effective weed control method in wet-hill-seeding use black colored rice. The most effective weed control system was application of bromobutide thiobencarb five days before seeding followed by bensulfuron mefenacet thiobencarb 12 days after seeding (barnyardgrass at 2.5-3.0 leaf stage). The seedling stand by seeding time and planting density increased with the delay seeding time and high planting density. The heading dates were delayed as the seeding time became late but no difference was found between planting density. The anthocyanin content of black colored rice was higher at late seeding time and lower planting density. The yield of full colored rice was high 80 plants per $3.3m^2$ in seeding on May 30 and June 10. This information could be useful for spreading rice direct seeding by inducing stabilization of wet-hill-seeding use black colored rice.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.5
• /
• pp.59-69
• /
• 2011

Since power analysis attack which uses a characteristic that power consumed by crypto device depends on processed data has been proposed, many logics that can block these correlation originally have been developed. DRP logic has been adopted by most of logics maintains power consumption balanced and reduces correlation between processed data and power consumption. However, semi-custom design is necessary because recently design circuits become more complex than before. This design method causes unbalanced design pattern that makes DRP logic consumes unbalanced power consumption which is vulnerable to power analysis attack. In this paper, we have developed new logic style which adds another discharge phase to discharge two output nodes at the same time based on DyCML to remove this unbalanced power consumption. Also, we simulated 1bit fulladder to compare proposed logic with other logics to prove improved performance. As a result, proposed logic is improved NED and NSD to 60% and power consumption reduces about 55% than any other logics.

• Korean Security Journal
• /
• no.48
• /
• pp.147-176
• /
• 2016

Korean Peninsula is surrounded by ocean on three sides. Because of this geographical quality over 97% of export and import volumes are exchange by sea. Foreign ship and international passenger vessels carries foreign tourist and globalization and internationalization increases this trends. Leisure population grows with national income increase and interest of ocean. And accidents and incidents rates are also increases. Korea Coast Guard's jurisdiction area is 4.5 times bigger than our country. The length of coastline is 14,963km including islands. One patrol vessel is responsible for 24,068km and one coast guard substation is responsible for 94km. Efficient patrol activities can not be provided. This research focus on this problem. Analyze the status and trends of maritime crime and suggest efficient patrol activities. To deal with increasing maritime crime rate this study suggest to use geographical profile method which developed early 1900s in USA. This geographical profile analyse the spatial characteristic and mapping this result. With this result potential crime zone can be predicted. One of the result is hot spot management which gives data about habitual crime zone. In Korea National Police Agency adopt this method in 2008 and apply on patrol and crime prevention activity by analysis of different criteria. Korea National Police Agency analyse the crime rate with crime type, crime zone and potential crime zone, and hourly, regionally criteria. Korea Coast Guard need to adopt this method and apply on maritime to make maritime crime map, which shows type of crime with regional, periodical result. With this geographical profiling we can set a Criminal Point which shows the place where the crime often occurs. The Criminal Points are set with the data of numerous rates such as homicide, robbery, burglary, missing, collision which happened in ocean. Set this crime as the major crime and manage the data more thoroughly. I expect to enhance the reinforcement of marine crime using this Criminal Points. Because this points will give us efficient way to prevent the maritime crime by placing the patrol vessel where they needed most.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.1
• /
• pp.25-29
• /
• 2020

This study demonstrates direct-patternable amorphous TiO_x resistive switching (RS) device and the fabrication method using photochemical metal-organic deposition (PMOD). For making photosensitive stock solutions, Ti(IV) 2-ethylhexanoate was used as starting precursor. Photochemical reaction by UV exposure was observed and analyzed by Fourier transform infrared spectroscopy and the reaction was completed within 10 minutes. Uniformly formed 20 nm thick amorphous TiO_x film was confirmed by atomic force microscopy. Amorphous TiO_x RS device, formed as 6 × 6 ㎛ square on 4 ㎛ width electrode, showed forming-less RS behavior in ±4 V and on/off ratio ≈ 20 at 0.1 V. This result shows PMOD process could be applied for low temperature processed ReRAM device and/or low cost, flexible memory device.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.1-7
• /
• 2018

The IoT environment provides an infinite variety of services using many different devices and networks. The development of the IoT environment is directly proportional to the level of security that can be provided. In some ways, lightweight cryptography is suitable for IoT environments, because it provides security, higher throughput, low power consumption and compactness. However, it has the limitation that it must form a new cryptosystem and be used within a limited resource range. Therefore, it is not the best solution for the IoT environment that requires diversification. Therefore, in order to overcome these disadvantages, this paper proposes a method suitable for the IoT environment, while using the existing block cipher algorithm, viz. the lightweight cipher algorithm, and keeping the existing system (viz. the sensing part and the server) almost unchanged. The proposed BCL architecture can perform encryption for various sensor devices in existing wire/wireless USNs (using) lightweight encryption. The proposed BCL architecture includes a pre/post-processing part in the existing block cipher algorithm, which allows various scattered devices to operate in a daisy chain network environment. This characteristic is optimal for the information security of distributed sensor systems and does not affect the neighboring network environment, even if hacking and cracking occur. Therefore, the BCL architecture proposed in the IoT environment can provide an optimal solution for the diversified IoT environment, because the existing block cryptographic algorithm, viz. the lightweight cryptographic algorithm, can be used.