• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.613-614
• /
• 2006

• Bulletin of the Korean Chemical Society
• /
• v.23 no.8
• /
• pp.1103-1105
• /
• 2002

H-ZSM-5 and γ-alumina were treated with formaldehyde and sodium carbonate. The treatment increased the amounts of weak acid sites, removing strong acid sites. The maximum temperature of weak acid sites in their ammonia TPD spectra shifted in the direction of high temperature. The modified H-ZSM-5 and g-alumina were mixed with the methanol synthesis catalyst to perform dimethyl ether synthesis from syn-gas. The modified catalysts showed better selectivity to dimethyl ether, minimizing the reforming reaction to carbon dioxide. The maximum yield of 53.3% to dimethyl ether was achieved under the reaction conditions of 54.4 atm, 523 K, and the feed rate of 4500 Lhr-1 .gcat-1.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.07a
• /
• pp.129-132
• /
• 2003

Silica/SUS composite membranes were prepared for CO removal from products of methanol steam reforming. A support was prepared by coating Ni powder of sub-micron and SiO$_2$ sols of particle size of 500nm and 150nm in turns on a porous stainless steel (SUS) substrate. Silica top layer was coated on the modified support using colloidal sol with nanoparticle. As a result of mixture gas permeation test of silica composite membrane using H$_2$(99%)/CO(1%), CO concentration of 10000 ppm was reduced to under 81 ppm, which is acceptable in PEMFC anode gas specification. Permeation mechanism through the membrane was mainly molecular sieving.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.07a
• /
• pp.21-24
• /
• 2003

Methane steam reforming (MSR) was studied in a membrane reactor (MR) with a Pd-based and a porous alumina membranes. MRs showed methane conversion higher than that foresaw by the thermodynamic equilibrium for a traditional reactor (TR). Silica membranes prepared at KRICT were characterized with permeation tests on single gases ($N_2$, $H_2$ and $CH_4$). These silica membranes can be also used for high temperature applications such as $H_2$ separation $CO_2$ hydrogenation for methanol production is another reaction where $H_2O$ selective removal can be performed with these silica membranes.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.73-74
• /
• 2015

Synthesis gas such as hydrogen and carbon monoxide was produced from $CH_4/oxygen$ mixture using insulated pressurized porous media combustor. Experimentally, two cylindrical SiC foams with the different pore density were piled up in a quartz tube and fully premixed mixture was supplied in the axial direction. After stabilizing fuel-rich flame at the interface of the two foams at several pressure conditions, mole fractions of synthesis gases were measured by gas chromatography. Heat recirculation through the inner foam structure could extend the flow velocity of stable region over the laminar burning velocity. As the pressure increased, the rich flammability limit, $H_2/CO$ ratio, and module M increased.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.611-612
• /
• 2005

Fuel cells is proved that potential energy is greater than the existing power generation. In this paper, we describe a principle of fuel cell which is used for next generation portable battery and brief characteristic of direct methanol fuel cells (DMFCs) that used for portable appliances by miniaturization of polymer electrolyte fuel cell. Lastly we describe about research investment for fuel cells.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.205.1-205.1
• /
• 2010

국내에서 발생하는 생활폐기물 발열량이 최근 3,000 kcal/kg 정도를 웃돌고 있고 사업장 폐기물의 경우는 4,000~7,000 kcal/kg 정도로 높아 이러한 가연성 폐기물 들은 자원화하여 에너지원으로 사용가능하다. 폐기물 자원화 기술의 하나인 가스화 기술을 적용하면 폐기물 내의 가연분은 CO, $H_2$가 주성분인 합성가스로 전환되어 화학원료 또는 발전원료로서 활용이 가능하다. 본 연구에서는 합성가스의 다양한 활용분야 중에서도 메탄올과 CO의 합성을 통해 얻어지는 초산제조 공정에서 폐기물의 가스화를 통해 발생되는 합성가스 내의 CO를 적용하여 기존 초산제조공정에서 필요한 CO를 생산하기 위해 소모되는 고가의 납사 원료를 절감하고자 하는 방안이 검토되고 있다. 초산은 CO와 메탄올($CH_3OH$)을 금속이온계 귀금속촉매 상에서 메탄올카본닐레이션(Methanol carbonylation)반응으로부터 합성되는 것으로, 초산에스테르, 염료, 안료, 의약품 등의 원료로 사용되는 화학원료이다. 일반적으로 초산을 제조하기 위해 사용되는 CO를 생산하기 위하여 납사(Naptha)를 가스화하는 부분산화공정을 이용하거나 촉매를 사용한 Steam reforming공정을 적용하고 있는데, 가스화 및 Steam reforming의 원료가 되는 납사가 고가이고, 원유가가 상승하면 납사의 가격도 상승할 수 있고, 결국 초산제조 비용의 상승을 초래할 수 있다. 폐기물의 가스화를 통해 발생하는 합성가스 내의 CO를 활용하여 초산제조의 원료로 사용할 수 있다면 초산제조 공정에서의 CO 제조 비용 절감 및 폐기물 자원화의 효과를 동시에 달성할 수 있을 것으로 생각된다. 본 연구에서는 초산제조의 원료로 폐기물의 가스화를 통해 발생한 합성가스 내의 CO를 적용가능성을 검토하기 위하여 사업장 폐기물 및 사업장폐기물과 폐유, 건조슬러지 등을 혼합한 복합폐기물의 가스화를 통해 CO의 발생 특성을 분석하였다.

• Journal of Hydrogen and New Energy
• /
• v.12 no.4
• /
• pp.277-285
• /
• 2001

We developed a compact, 10 kWe, purifier-integrated reformer which supplies hydrogen for fuel cell vehicles. Our proprietary technologies regarding hydrogen purification by palladium alloy membrane and catalytic combustion by noble metal coated wire-mesh catalyst were combined with the conventional methanol steam reforming technology, resulting in higher conversion, excellent quality of product hydrogen, and better thermal efficiency than any other systems. In this system, steam reforming, hydrogen purification, and catalytic combustion take place all in a single reactor so that the whole system is compact and easy to operate. The module produces $8.2Nm^3/hr$ of 99.999% or higher purity hydrogen with CO impurity less than 10 ppm, which is equivalent to 10 kWe when PEMFC has 45 % efficiency. Thermal efficiency of the module is 81 % and the power density of the module is 1.6 L/kWe. As the results of experiments, cold-start time has been measured about 20 minutes. Response time of hydrogen production to the change of the feed rate has been within 1 minutes.

• Journal of Powder Materials
• /
• v.15 no.3
• /
• pp.234-238
• /
• 2008

Al-Cu alloy nano powders have been produced by the electrical explosion of Cu-plated Al wire. The porous nano particles were prepared by leaching for Al-Cu alloy nano powders in 40wt% NaOH aqueous solution. The surface area of leached powder for 5 hours was 4 times larger than that of original alloy nano powder. It is demonstrated that porous nano particles could be obtained by selective leaching of alloy nano powder. It is expected that porous Cu nano powders can be applied for catalyst of SRM (steam reforming methanol).

• Journal of Hydrogen and New Energy
• /
• v.19 no.3
• /
• pp.217-225
• /
• 2008

A new micro reformer system consisted of a micro reformer, a microcombustor and a micro evaporator was studied experimentally and computationally. In order to satisfy the primary requirements for designing the microcombustor integrated with a micro evaporator, i.e. stable burning in a small confinement and maximum heat transfer through a wall, the present microcombustor is simply cylindrical to be easily fabricated but two-staged (expanding downstream) to feasibly control ignition and stable burning. Results show that the aspect ratio and wall thickness of the microcombustor substantially affect ignition and thermal characteristics. For the optimized design conditions, a premixed microflame was easily ignited in the expanded second stage combustor, moved into the smaller first stage combustor, and finally stabilized therein. A micro reformer system integrated with a modified microcombustor based on the optimized design condition was fabricated. For a typical operating condition, the designed micro reformer system produced 22.3 sccm hydrogen (3.61 W in LHV) in an overall efficiency of 12%.