• Journal of the Korean Solar Energy Society
• /
• v.27 no.4
• /
• pp.157-165
• /
• 2007

Typical meteorological data is fundamental to computer simulation introduced for environment-friendly architecture designs. Therefore, in order to improve accuracy of computer simulation, typical meteorological data should be established. By examining how to choose typical meteorological data, this study selected the optimized weight factor for TRY where weighting factor was not clearly set. As a result, the same weighting factor was applied to each climatic element and TRY data where the weight factor was applied could have the distribution very similar to measurement data. The weighting factor is considered to reflect geographical characteristics of Seoul and applied climatic elements.

• Atmosphere
• /
• v.14 no.3
• /
• pp.19-28
• /
• 2004

In this study, two years Automatic Weather Station (AWS) data observed near the coast and islands are used to evaluate gust factors only when time averaged wind speed is higher than 5 ms. The gust factors are quite different in spatial and temporal domain according to analysis method. As the averaged time is increased, the gust factors are also increased. But the gust factors are decreased when wind speed is increased. It is because each wind speed is averaged one and a maximum wind is the greatest one for each time interval. The result from t-test is shown that all data are included within the 99% significance level. A sample standard deviation of ten minutes and one minute are 0.137~0.197, 0.067~0.142, respectively. Recently, the gust factor provided at the Korea Meteorological Administration (KMA) Homepage is calculated with one-hour averaged method. All though this method is hard to use directly for forecasting the strong wind over sea and coast, the result will be a great help to express Ocean Storm Flash in the Regional Meteorological Offices and the Meteorological Stations.

• Atmosphere
• /
• v.25 no.2
• /
• pp.221-233
• /
• 2015

Pollen is closely related to health issues such as allergenic rhinitis and asthma as well as intensifying atopic syndrome. Information on current and future spatio-temporal distribution of allergenic pollen is needed to address such issues. In this study, the Community Multiscale Air Quality Modeling (CMAQ) was utilized as a base modeling system to forecast pollen dispersal from oak trees. Pollen emission is one of the most important parts in the dispersal modeling system. Areal emission factor was determined from gridded areal fraction of oak trees, which was produced by the analysis of the tree type maps (1:5000) obtained from the Korea Forest Service. Daily total pollen production was estimated by a robust multiple regression model of weather conditions and pollen concentration. Hourly emission factor was determined from wind speed and friction velocity. Hourly pollen emission was then calculated by multiplying areal emission factor, daily total pollen production, and hourly emission factor. Forecast data from the KMA UM LDAPS (Korea Meteorological Administration Unified Model Local Data Assimilation and Prediction System) was utilized as input. For the verification of the model, daily observed pollen concentration from 12 sites in Korea during the pollen season of 2014. Although the model showed a tendency of over-estimation in terms of the seasonal and daily mean concentrations, overall concentration was similar to the observation. Comparison at the hourly output showed distinctive delay of the peak hours by the model at the 'Pocheon' site. It was speculated that the constant release of hourly number of pollen in the modeling framework caused the delay.

• Journal of Climate Change Research
• /
• v.7 no.2
• /
• pp.193-203
• /
• 2016

The importance of forecasting agricultural production is receiving attention while climate change is accelerating. This study suggested three types of crop yield forecasting model for major vegetable crops by using downscaled meteorological information of main production area on farmland level, which identified as limitation from previous studies. First, this study conducted correlation analysis with seven types of farm level downscaled meteorological informations and reported crop yield of main production area. After, we selected three types of meteorological factors which showed the highest relation with each crop species and regions. Parameters were deducted from meterological factor with high correlation but crop species number was neglected. After, crop yield of each crops was estimated by using the three suggested types of models. Chinese cabbage showed high accuracy in overall, while the accuracy of daikon and onion was quiet revised by neglecting the outlier. Chili and garlic showed differences by region, but Kyungbuk chili and Chungnam, Kyungsang garlic appeared significant accuracy. We also selected key meteorological factor of each crops which has the highest relation with crop yield. If the factor had significant relation with the quantity, it explains better about the variations of key meteorological factor. This study will contribute to establishing the methodology of future studies by estimating the crop yield of different species by using farmland meterological information and relatively simplify multiple linear regression models.

• Journal of the Korean Data and Information Science Society
• /
• v.14 no.4
• /
• pp.773-787
• /
• 2003

Principal component analysis, factor analysis and cluster analysis have been performed to analyze the relationship between air pollutants and meteorological variables measured in 1999 in Seoul. In principal analysis, the first principal has been shown the contrast effect between $O_3$ and the other pollutants, the second principal has been shown the contrast effect between CO, $SO_2$, $NO_2$ and $O_3$, PM10, TSP. In factor analysis, the first factor has been found as PM10, TSP, $NO_2$ concentrations which are related with suspended particulates. As a result of cluster analysis, three clusters respectively have represented different air pollution levels, seasonal characteristics of air pollutants and meteorological situations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.5
• /
• pp.722-727
• /
• 2018

Until now, the study of fine dust has been divided into prediction, analysis and measurement, mainly in the field of atmospheric environment. Fine dust is caused by various causes such as atmospheric quality factor, meteorological factor and emission. It was determined that it was a priority to analyze the correlation of how much each element affects fine dust, and it was experimented. This correlation analysis was done using IBM SPSS tool using air quality factor and meteorological factor data obtained from Korea Meteorological Administration and Air Korea. As a result, the influence of air quality factors and meteorological factors on the fine dust level was more clearly understood. In this paper, we present experimental results as correlation analysis and pearson coefficient for more precise analysis between PM10 values and affected factors.

• The Korean Journal of Applied Statistics
• /
• v.24 no.6
• /
• pp.1225-1235
• /
• 2011

This paper suggests a method for tuning a numerically simulated wind speed data, provided by NIMR(National Institute of Meteorological Research) and generated from a numerical meteorological model to improve a wind resource map with a $1Km{\times}1Km$ resolution. To this end, "tuning factor method" is developed that consists of two procedures. First, estimate monthly wind fields based on a suitably designed statistical wind field model that covers 345,682 regions obtained by $1Km{\times}1Km$ lattice sites in South Korea. The second procedure computes the tuning factor and then tunes the generated wind speeds of each month as well as each lattice site. The second procedure is based on the wind fields estimated by the first procedure. The performance of the suggested tuning method is demonstrated by using two wind data(both TMY and numerically simulated wind speed data) of 75 weather station areas.

• Atmosphere
• /
• v.17 no.1
• /
• pp.45-53
• /
• 2007

In order to investigate the impacts of heat wave on human health, cluster analysis of meteorological elements (e.g., temperature, dewpoint, sea level pressure, visibility, cloud amount, and wind components) for identifying offensive synoptic air masses is employed. Meteorological data at Seoul during the past 30 years are used. The daily death data at Seoul are also employed. Occurrence frequency of heat waves which is defined by daily maximum temperature greater than the threshold temperature (i.e., $31.2^{\circ}C$) was analyzed. The result shows that the frequency and duration of heat waves at Seoul are increasing during the past 30 years. In addition, the increasing trend of the frequency and duration clearly appears in late spring and early autumn as well as summer. Factor analysis shows that 65.1% of the total variance can be explained by 4 components which are linearly independent. Eight clusters (or synoptic air masses) were classified and found to be optimal for representing the summertime air masses at Seoul, Korea. The results exhibit that cluster-mean values of meteorological variables of an offensive air mass (or cluster) are closely correlated with the observed and standardized deaths.

• Journal of Environmental Science International
• /
• v.21 no.4
• /
• pp.461-470
• /
• 2012

Agriculture is more influenced by environmental factors rather than other industries. Among the environmental factors, the meteorological conditions mainly impact the output of agricultural products. Hence, the purpose of this study is to analyze the impact of meteorological factors on the output of elemental agricultural products. As a first step, we obtained the data of the meteorological factors (i.e., precipitation, humidity, temperature, insolation, snowdrifts, wind velocity) and the output of the various agricultural products (i.e., grain, fruits and vegetables, root crops, green vegetables, seasoned vegetables, fruits, special crops) from the year 1990 to 2009 (20 years) of Seoul and the six metropolitan cities in Korea. Then, the analysis of the correlation between the agricultural product with the largest output and the meteorological factors of the place where the corresponding agricultural product is most produced, was carried out in order to determine the core meteorological factor that most impacts the output of agricultural product. The correlation analysis revealed that humidity, insolation and wind velocity have been the crucial meteorological factors to influence the output of the agricultural products. From the result, we can induce that the meteorological forecast information about the vital meteorological factors, i.e., humidity, insolation and wind velocity, facilitates the optimized cultivation plan to maximize the output of agricultural products.

• Journal of Environmental Science International
• /
• v.19 no.6
• /
• pp.787-797
• /
• 2010

Nowadays meteorological information is systemized as a useful knowledge which has a significant effect on the overall industrial domains over the simple data. The distribution industry, which has the short life cycle, depends on the meteorological information at the strategic level. However, it is necessary to pay attention to the continuous investment in meteorological information because there is a hostility to paying for a service, particularly it does not provide accurate and reliable information. Therefore, the purpose of this study is to increase the usefulness of meteorological information in the distribution industry for its economic effectiveness from the core meteorological factors. We found significant meteorological factors (temperature, precipitation, disaster) that have a critical influence on the distribution industry through the hierarchical analysis process, and their importance according to the type of distribution channels, such as department store, large-scale discount store, convenience store, and home shopping. We performed the AHP analysis with 103 survey samples by middle managers from the various distribution channels. We found that precipitation is the critical meteorological factor across the distribution industry. Based on this result, we stress the difference in the level of the meteorological information in order for the effectiveness of each type of distribution channels.