• Journal of information and communication convergence engineering
• /
• v.8 no.3
• /
• pp.301-306
• /
• 2010

This project is to study and design a meteorological buoy. It mainly covers and compares two approaches to design a meteorological buoy where their functions are same. The comparison will be made between mechanical structure, type of sensors, and electronics system design and power consumption issues.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.1
• /
• pp.51-57
• /
• 2010

This paper is to study and design a generic electronics system for a meteorological buoy. It mainly covers the communication methods of a buoy with base station, data post processing and power design of a generic weather buoy system. The experiment result shows the design is capable to works well in term of data receive from buoy at base station, battery life time and able to work standalone without any power exhausted problem.

• Journal of Environmental Science International
• /
• v.32 no.11
• /
• pp.841-852
• /
• 2023

In this study, the significant wave height and wave period of a specially designed observation system that connected two drifting buoys to an ocean data buoy was observed for 23 days from February 7 to 29, 2020, and the results were compared and analyzed. The results indicated that, in comparison to the ocean data buoy, the drifting buoy exhibited greater variability in significant wave height over shorter time intervals. The wave period of the ocean data buoy also appeared longer than that of the drifting buoy. The greater the observed significant wave height and wave period from both the ocean data and drifting buoys, the more pronounced the differences between the two observation instruments become. Moreover, the study revealed that the disparity in observation methods between the ocean data and drifting buoys did not significantly affect the significant wave height characteristics, as long as the period remained unchanged for up to half of the observation time.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.638-643
• /
• 2002

MODIS (MODerate-resolution Imaging Spectroradiometer) onboard the first Earth Observing System (EOS) satellite, Terra, was launched successfully at the end of 1999. The direct broadcast MODIS data has been received and utilized in Korea Meteorological Administration (KMA) since february 2001. This study introduces utilizations of this data, especially for the derivation of sea surface temperature (SST). To produce the MODIS SST operationally, we used a simple cloud mask algorithm and MCSST algorithm. By using a simple cloud mask algorithm and by assumption of NOAA daily SST as a true SST, a new set of MCSST coefficients was derived. And we tried to analyze the current NASA's PFSST and new MCSST algorithms by using the collocated buoy observation data. Although the number of collocated data was limited, both algorithms are highly correlated with the buoy SST, but somewhat bigger bias and RMS difference than we expected. And PFSST uniformly underestimated the SST. Through more analyzing the archived and future-received data, we plan to derive better MCSST coefficients and apply to MODIS data of Aqua that is the second EOS satellite. To use the MODIS standard cloud mask algorithm to get better SST coefficients is going to be prepared.

• Korean Journal of Remote Sensing
• /
• v.29 no.6
• /
• pp.631-644
• /
• 2013

Significant Wave Height (SWH) data measured by satellite altimeters (Topex/Poseidon, Jason-1, Envisat, and Jason-2) were validated in the seas around Korea by comparison with wave height measurements from marine meteorological buoy stations of Korea Meteorological Administration (KMA). A total of 1,070 collocation matchups between Ku-band satellite altimeter data and buoy data were obtained for the periods of the four satellites from 1992 to the present. In the case of C-band and S-band observations, 1,086 matchups were obtained and used to assess the accuracy of satellite SWH. Root-Mean-Square (RMS) errors of satellite SWH measured with Ku-band were evaluated to roughly 0.2_2.1 m. Comparisons of the RMS errors and bias errors between different frequency bands revealed that SWH observed with Ku-band was much more accurate than other frequencies, such as C-band or S-band. The differences between satellite SWH and buoy wave height, satellite minus buoy, revealed some dependence on the magnitude of the wave height. Satellite SWH tended to be overestimated at a range of low wave height of less than 1 m, and underestimated for high wave height of greater than 2 m. Such regional characteristics imply that satellite SWH should be carefully used when employed for diverse purposes such as validating wave model results or data assimilation procedures. Thus, this study confirmed that satellite SWH products should be continuously validated for regional applications.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.7
• /
• pp.1003-1010
• /
• 2013

In this paper, TCP/IP based Machine-to-Machine (M2M) communication uses CDMA/GSM network for data communication. This communication method is widely used by offshore moored buoy for data transmission back to the system server. Due to weather and signal coverage, the TCP/IP M2M communication often experiences transmission failure and causing data losses in the server. Data losses are undesired especially for meteorological and oceanographic analysis. This paper discusses a software approach to minimize M2M data losses by handling transmission failure and re-attempt which meant to transmit the data for recovery. This implementation was tested for its performance on a meteorological buoy placed offshore.

• Korean Journal of Remote Sensing
• /
• v.33 no.3
• /
• pp.275-285
• /
• 2017

National Meteorological Satellite Center(NMSC) has produced Sea Surface Temperature (SST) using Communication, Ocean, and Meteorological Satellite(COMS) data since April 2011. In this study, we have developed a new regional COMS SST algorithm optimized within the North-West Pacific Ocean area based on the Multi-Channel SST(MCSST) method and made a composite SST using polar orbit satellites as well as the COMS data. In order to retrieve the optimized SST at Northwest Pacific, we carried out a colocation process of COMS and in-situ buoy data to make coefficients of the MCSST algorithm through the new cloud masking including contaminant pixels and quality control processes of buoy data. And then, we have estimated the composite SST through the optimal interpolation method developed by National Institute of Meteorological Science(NIMS). We used four satellites SST data including COMS, NOAA-18/19(National Oceanic and Atmospheric Administration-18/19), and GCOM-W1(Global Change Observation Mission-Water 1). As a result, the root mean square error ofthe composite SST for the period of July 2012 to June 2013 was $0.95^{\circ}C$ in comparison with in-situ buoy data.

• Journal of the Korean earth science society
• /
• v.24 no.1
• /
• pp.7-21
• /
• 2003

The state-of-art third generation wave prediction model WAM was applied to the Korean seas for a winter monsoon period of January 1997. The wind field used in the present study is the global NSCAT-ERS/NCEP blended winds, which was further interpolated using a bi-cubic spline interpolator to fine grid limited area shallow water regime surrounding the Korean seas. To evaluate and investigate the accuracy of WAM, the hindcasted wave heights are compared with observed data from two shallow water buoys off Chil-Bal and Duk-Juk. A detailed study has been carried with the various meteorological parameters in observed buoy data and its inter-dependency on model computed wave fields was also investigated. The RMS error between the observation and model computed wave heights results to 0.489 for Chil-Bal and 0.417 for Duk-Juk. A similar comparison between the observation and interpolated winds off Duk-Juk show RMS error of 2.28 which suggest a good estimate for wave modelling studies.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.72-74
• /
• 2022

Several types of data are collected from buoy due to the development of hardware technology.. However, the collected data are difficult to use due to errors including missing values and outliers depending on mechanical faults and meteorological environment. Therefore, in this study, linear interpolation is performed by adding the missing time data to enable machine learning to the insufficient meteorological data. After the linear interpolation, XGBoost and KNN-regressor, are used to forecast error data and suggested model is evaluated by using real-world data of a buoy.

• Atmosphere
• /
• v.19 no.1
• /
• pp.93-106
• /
• 2009

Analysis has been made on the wind wave characteristics in terms of significant wave height ($H_s$) near the Korean marginal seas in the 2006 - 2007 year using the third generation wave model, WAVEWATCH - III model. In order to evaluate its performance, its results were compared with the observed data using KMA ocean buoy. The two year average RMSE between modeled and observed Hs shows reasonably small value of about 0.37 m. The accuracy of predicted values in the year 2007 is increased mainly due to finer model grid size and better accurate wind field. The model used in this study predicts very well the characteristics ($H_s$) of wind waves near the Korean Peninsular. Simulated monthly wind waves show the evident seasonal variations due to Typhoons in summer season. When Typhoons approach to Korean Peninsular, the accuracy of wind waves predictions is lower than that of annual mean value.