• 한국지하수토양환경학회지:지하수토양환경
• /
• 제29권1호
• /
• pp.10-17
• /
• 2024

In Korea, the common remedial process for reclamation of agricultural soils nearby abandoned mines involves chemical soil stabilization followed by covering with clean soil. This study investigated the chemical properties of cover soils and the validity of HCl extraction method in assessing the degree of As and heavy metal stabilization in stabilized soils collected from 14 plots where mine reclamation had been completed. The results revealed there were no major differences in contaminants extraction rate between the stabilized soils and contaminated soils, suggesting HCl extraction procedure is a less feasible method to determine the efficiency of the stabilization. Soil quality indicators including OM, SiO₂, P₂O₅, etc. of the land-covering soils were generally lower than those of stabilized soils that used to be the cultivation layer before the stabilization. Nonetheless, the value of those indicators didn't meet the regulatry limits of agricultural soil. Therefore, future strategy for mine reclamation should concentrate not only on contaminant concentration but also on soil quality parameters for agricultural use of the reclaimed soil.

• 한국토양비료학회지
• /
• 제44권6호
• /
• pp.1063-1070
• /
• 2011

본 연구는 수용액 내 존재하는 Cd, Pb을 다양한 화학적 안정화제를 이용하여 안정화 효율성을 평가하였다. 연구에 사용한 안정화제는 중금속 이온과의 반응특성 별로 석회물질, 광물질 등으로 구분하여 문헌조사를 바탕으로 5종을 선정하여 사용했다. 안정화 효율성 평가방법은 용액 내 중금속 함량을 단계적으로 제조하여 안정화 효율성, 반감기 및 반응속도 산정 및 반응 후 안정화제의 반응생성물 확인의 순으로 진행했다. 안정화 효율성 평가결과 석회물질 ($CaCO_3$)을 다량 함유하여 기본적으로 pH를 8이상으로 교정하는 안정화제의 경우 처리량에 상관없이 대부분 불용화되는 것으로 나타났으며, 낮은 산도교정 물질은 50% 수준의 효율성을 갖는 것으로 나타났다. 또한, 효율성이 크게 나타난 물질을 대상으로 반응속도상수 (K)를 산출한 결과 Cd의 경우 처리량에 따라 증가하였지만, Pb의 경우 초기에 반응속도가 빠르게 일어나 처리량에 따른 평가는 불가능 하였다. 다량의 중금속 이온과 반응시킨 안정화제의 표면관찰을 통한 생성물 검정 결과 SEM 사진으로 반응 전 후의 생성물 확인을 간접적으로 확인하였다. 또한, SEM-EDS 분석결과 반응 후 물질 표면에서 Cd과 Pb의 성분 검출을 확인하였다. 그리고 XRD 분석을 통해 효율성이 좋았던 물질에서 Cd과 Pb 성분의 검출이 확인되어 수용액 상에 이온형태로 존재하는 중금속의 복원에 안정화제를 이용한 저감은 효율적일 것으로 판단된다.

• 한국환경과학회지
• /
• 제19권2호
• /
• pp.255-260
• /
• 2010

A stabilization/solidification (S/S) process for lead (Pb) contaminated soils was evaluated using waste cow bone containing apatite like compounds. Soil samples obtained form firing range were treated with waste cow bone. The effectiveness of stabilization was evaluated based on the Korean Standard Leaching Test (KSLT) and soil pH. The leached concentration reduced with increased in dose of waste cow bone. Overall, the KSLT results showed that Pb concentration in soils are significantly affected by amount of waste cow bone. When soil amended with 20 % of waste cow bone, less than 0.1 mg/kg was leached, and soil pH was increased from 6.5 to 8.4. Same results were obtained when finer waste cow bone was applied. The reachable concentration of Pb in soil showed in inversely proportional to solid/liquid ratio. Aging periods indicate improving mix design was applied. Relatively high lead concentrations was observed at the first 1 days, however leaching profile are reduced significantly over time for all mix designs.

• 유기물자원화
• /
• 제17권4호
• /
• pp.81-90
• /
• 2009

현재 가동 중인 생활폐기물 소각시설이 약 35여개소 정도 있으며, 폐기물관리 정책에 따라 폐기물을 효율적으로 재활용하고 발생을 최소화하기 위하여 폐기물 발생억제, 감량, 재이용, 재활용, 에너지 회수를 포괄하는 개념으로 소각을 통해 최종처리되는 폐기물을 최소화하려는 정책이다. 하지만, 소각 후에 발생하는 소각재에서 일부 항목(Cu, Pb)의 중금속용출이 기준치를 초과하는 것으로 나타나 커다란 사회적 문제가 제기되어 이에 대한 대책방안을 모색하게 되었다. 소각재에 포함된 중금속인 유해물질을 용출 확산되지 않도록 소각재에 대한 화학약품처리 방식인 중금속 용출억제제를 혼합하여 용출되지 않도톡 안정화시설을 개발하여 2차 환경오염의 확산억제외 바닥재 함유 중금속의 안정화 효율을 증대된 것으로 조사되었다.

• 한국환경과학회지
• /
• 제26권8호
• /
• pp.955-966
• /
• 2017

Amendment of multi-binders was employed for the immobilization of metal(loid)s in field-contaminated soils to reduce the leaching potential. The effect of different types of multi-binders (lime/diammonium phosphate, diammonium phosphate/ladle slag and lime/ladle slag) on the solidification/stabilization of metal(loid)s (Pb, Zn, Cu and As) from the smelter soil and mine tailing soil were investigated. The amended soils were evaluated by measuring Toxicity Characterization Leaching Procedure (TCLP) leaching concentration of metal(loid)s. The results show that the leaching concentration of metal(loid)s decreased with the immobilization using multi-binders. In terms of TCLP extraction, the mixed binder was effective in the order of lime/ladle slag > diammonium phosphate/ladle slag > lime/diammonium phosphate. When the mixed binder amendment (0.15 g lime+0.15 g ladle slag for 1g smelter soil and 0.05 g lime+0.1 g ladle slag for 1 g mine tailing soil, respectively) was used, the leaching concentration of metal(loid)s decreased by 90%. However, As leaching concentration increased with diammonium phosphate/lime and diammonium phosphate/ladle slag amendment competitive anion exchange between arsenic ion and phosphate ion from diammonium phosphate. The Standard, Measurements and Testing programme (SM&T) analysis indicated that fraction 1 (F1, exchangeable fraction) decreased, while fraction 4 (F4, residual fraction) increased. The increased immobilization efficiency was attributed to the increase in the F4 of the SM&T extraction. From this work, it was possible to suggest that both arsenic and heavy metals can be simultaneously immobilized by the amendment of multi-binder such as lime/ladle slag.

• 환경위생공학
• /
• 제18권4호
• /
• pp.36-44
• /
• 2003

The cement-based system among S/S(Solidification/Stabilization) is widely used to treat hazardous wastes. In this study, tannery sludge was solidified to evaluate the stabilization effects of using admixtures in the cement-based S/S. Fly ash as substitute also used to increase the strength of the S/S of hazardous waste. The compressive strength measurement and leaching experiment of chromium metal of solidified mortar were carried out to compare and evaluate the physical and chemical characteristics of solidified hazardous waste sludge. From the result of this study, there was increased of compressive strength by using AEW-3(early-hardening AE water reducing agent), and leaching concentration of chromium became low enough to satisfy the regulatory criteria. The successful solidification for the organic contaminant and heavy metal in hazardous waste should enable to treat by cement-based system using early-hardening AE water reducing admixture and fly ash as substituted cement.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제26권6호
• /
• pp.65-73
• /
• 2021

Since the amount of red mud, generated from aluminum smelting process as a by-product, has increased worldwide, the recycle and metal resource recovery from the red mud is becoming more important. In this study, in order to recycle the red mud as a soil stabilizer to remediate arsenic contaminated soils, neutralization of red mud was investigated. Red mud was neutralized by washing with distilled water and NaCl, CaCl₂, FeCl₃, and HCl solutions and heating at 200-800℃, and arsenic stabilization characteristics in soils were evaluated with the neutralized red mud. Although washing with distilled water was not effective in neutralizing red mud, the application of the washed red mud to soils lowered the soil pH compared to the application of untreated red mud. Among NaCl, CaCl₂, FeCl₃, and HCl solutions, washing with FeCl₃ showed the most effective in lowering pH of the red mud from pH 10.73 to pH 4.26. Application of the neutralized red mud in soils resulted in quite different arsenic stabilization efficiency depending on soil samples. In M1 soil, which showed relatively high arsenic stabilization efficiency by untreated red mud, the neutralization of red mud resulted in little effect on arsenic stabilization in soil. On the other hand, in M2 soil, which showed low arsenic stabilization efficiency by untreated red mud, the neutralization of red mud increased arsenic stabilization significantly. Soil characteristics such as clay minerals and pH buffering capacity seemed to affect reactions between red mud and soils, which resulted in different effects of the red mud application on soil pH and arsenic stabilization efficiencies.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2002년도 춘계학술강연 및 발표대회
• /
• pp.51-51
• /
• 2002

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.92-97
• /
• 2002

By changing the excess air ratio which affects strongly to the combustion characteristics, the flame stability range in the metal fiber burner were found and the range of the blue flame male and radiant mode were distinguished by direct photography. The results in our experiments for the flame stability zone were from a=1.4($354 KW/m^2$) to a=2.06($240 KW/m^2$), and then the blue flame mode zone was form a=1.87($266 KW/m^2$) to a=2.06($240 KW/m^2$) and the radiant mode one was form a=1.4($354 KW/m^2$) to a =1.78($278 KW/m^2$). And the flame was not fired when a is less than the lean condition a=2.45($202 KW/m^2$).

• 열처리공학회지
• /
• 제4권4호
• /
• pp.34-43
• /
• 1991

A small amount of misch metal and/or Zr was added as a dopant to 70.5wt----Cu-26wt----Zn-3.5wt----Al shape memory alloy in order to study the effect of grain refinement and heat treatments on the transformation behavior, stabilization of martensite, and shape memory ability. It was found that the addition of misch metal and Zr was very effective for reducing the grain size. The fracture mode has been changed from intergranular brittle fracture to ductile fracture with void formation and coalescence by the addition of misch metal and Zr. Aging of the ${\beta}$-phase decreases the $M_s$ temperature, but that of the martensite phase increases the $A_s$ temperature. The hysteresis of transformation temperature ${\Delta}T(A_s-M_s)$ has an increasing tendancy by grain refinement. The crystal structure of martensite was identified as monoclinic structure. As the grain size decreased, martensite stabilization more easily occured and the shape, memory ability has been reduced by the grain size refined.