• 한국건설순환자원학회논문집
• /
• 제8권3호
• /
• pp.310-316
• /
• 2020

본 연구에서는 도전성이 우수하고 조달이 쉬운 금속계열 산업부산물을 EMP차폐용 콘크리트 골재로 사용하기 위해 골재의 안정성 평가 및 EMP차폐 성능평가를 실시하였다. 산업부산물 골재는 전기로산화슬래그, 동제련슬래그, 페로몰디브덴을 선정하여 사용하였으며 골재의 성분 분석과 골재안정성 평가를 실시하였다. 또한 산업부산물 골재를 콘크리트 골재로 사용하여 기본 물성 평가 및 EMP 차폐 성능 평가를 실시하였다. 실험 결과 산업부산물 골재중 페로몰리브덴은 Free-CaO가 높아 골재로서의 안정성이 낮게 나타났으며 나머지 골재들은 콘크리트용 골재로 사용하기에 무방한 것으로 평가 되었다. 또한 압축강도 실험 결과 페로몰디브덴을 제외한 산업부산물 골재를 제외한 실험체는 Plain 실험체 보다 높은 압축강도를 발현하였다. EMP차폐 성능 평가 결과 EMP 차폐성능이 높은 산업부산물 골재는 전기로산화슬래그, 동제련슬래그 이며 골재의 평균입경이 작거나 균일하게 분포되면 차폐성능은 증가할 것으로 사료된다.

• 전기학회논문지
• /
• 제66권12호
• /
• pp.1844-1851
• /
• 2017

As the capacity of the wireless power transmission increases, a higher supply current which may induce current in nearby conductive parts requires. Induced current may affect electric shock to the human body and malfunction of the electrical equipment. In order to prevent such induced phenomena as a risk factor, shielding is required between the source of the wireless power transmission and the conductive parts. The resonance frequency for the large capacity wireless power transmission has the wavelength of several hundred meters, so most environments are included in the near-field area. By wave impedance, the electric field has higher density in the near-field area and needs to be analyze for protecting. For this purpose, it is necessary to select a substance having a larger electric conductivity and optimized shielding structure. In this paper, an aluminum base shielding structure was presented to conduct experiments on thickness, position, and heat dissipation. In the 35 kW, 60 kHz environments, the optimized 5T Al base shielding structure attenuates the induced current to 43 %.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
• /
• pp.312.2-312.2
• /
• 2002

The metal-ligand complex, ［Ru(phen)$_2$(dppz)]^{2＋}$ (phen = 1.10-phenanthroline, dppz = dipyrido［3.2-a:2', 3'-c］phenazine) (RuPD), was used as a spectroscopic probe for studying nucleic acid dynamics. The RuPD complex displays a long lifetime and a molecular light switch property upon DNA binding due to shielding of its dppz ligand from water. (omitted)

• Journal of Welding and Joining
• /
• 제5권4호
• /
• pp.36-46
• /
• 1987

The impact toughness and SCC resistance of duplex stainless steel weldment made by GTAW, GMAW and SMAW processes was studied. The impact toughness of GTA weld metal was higher than that of GMA weld metal which contained more ferrite phase than GTA weld metal. The impact toughness of SMA weld metal was the lowest due to the harmful effect of inclusions inspite of richness of more ductile austenite phase. From these facts, it can be concluded that the important factors determining the weld metal toughness were the amount of ferrite phase and the cleaness of weld metal. While the SCC resistance of SMA weld metal was lower than that of base metal and nay other weld metal, the SCC resistance of GMA and GTA weld metal was higher than that of base metal but that of all the HAZ's were lower than that of base metal. Therefore, the impact toughness and SCC resistance of GTA and GMA weldment was pretty good as long as phase ratio was propertly controlled. Although the phase ratio was controlled, SMA weld metal could not get a good combination because the lack of shielding from the environment results in a high content of inclusions in weld metal.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1369-1375
• /
• 2004

For many years and primarily for economical reasons, Dissimilar Metal Welds have been used as transition joints in a variety of equipment and applications. But Dissimilar Metal Welds have several fabrication and metallurgical drawbacks that can often lead to in-service failures. For example, the most pronounced fabrication faults are hot cracks. Laser welding techniques have been characterised for various materials. In this paper, the laser weldability of STS304 stainless steel and SM45C at dissimilar metal welds using a continuous wave Nd：YAG laser are experimentally investigated. An experimental study was conducted to determine effects of welding parameters, on eliminating or reducing the extent welding zone formation at dissimilar metal welds and to optimize those parameters that have the most influence parameters such as focus length, power, beam speed, shielding gas, and wave length of laser were tested

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.17-26
• /
• 2005

Dissimilar-metal welds(DHWs) are used widely in various industrial applications due to the pratical importance from the technical and economic aspect. However, DMWs have several fabricative and metallurgical drawbacks that can often lead to in-service failures. For example, the most pronounced fabrication faults are hot cracks. Recently, DMWs have used the various of heat source to decrease such as faults. In this paper, the weldability on dissimilar metal welds of Austenite stainless steel and Low carbon steel using a continuous wave Nd:YAG laser was experimentally investigated. Experiments were conducted to determine effects of welding parameters, on eliminating or reducing the extent welding zone formation at dissimilar metal welds and to optimize those parameters that have the most influence parameters such as focus length, power, beam speed, shielding gas, and wave length of laser.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.250-256
• /
• 2004

For many years and primarily for economical reasons, Dissimilar Metal Welds have been used as transition joints in a variety of equipment and applications. But Dissimilar Metal Welds have several fabrication and metallurgical drawbacks that can often lead to in-service failures. In this paper, the laser weldability of STS304 stainless steel and SM45C at dissimilar metal welds using a continuous wave Nd:YAG laser are experimentally investigated. An experimental study was conducted to determine effects of welding parameters, on eliminating or reducing the extent welding zone formation at dissimilar metal welds and to optimize those parameters that have the most influence parameters such as focus length, power, beam speed, shielding gas, and wave length of laser were tested.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 추계학술발표대회 개요집
• /
• pp.155-157
• /
• 2005

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1998년도 추계연구발표회 논문개요집
• /
• pp.82-83
• /
• 1998

• 한국방사선학회논문지
• /
• 제12권2호
• /
• pp.173-178
• /
• 2018

병원에서 방사선을 차폐하는데 있어 납은 매우 유용하게 사용되고 있다. 하지만 납은 독성을 가지고 있고 대체물질에 대한 연구가 많이 이루어지고 있으며, 대표적으로 텅스텐을 대체물질로 한 연구가 많이 이루어지고 있다. 이에 본 연구에서 납과 텅스텐의 물리적 특성 및 반가층 실험을 진행한 결과 원자번호가 높은 납 원소의 반응단면적이 텅스텐에 비해 높게 나타났으나, 텅스텐의 밀도가 높아 동일한 크기일 경우 텅스텐의 전자밀도가 납에 비해 약 1.7배 높은 것으로 나타났다. MCNPX를 이용한 모의 모사에서도 에너지 따라 다소 차이가 있지만 텅스텐이 납에 비해 약 1.4배 차폐효과가 높은 것으로 나타났으며, 텅스텐이 납에 비해 우수한 차폐효율을 갖고 있는 것으로 확인 되었다. 하지만 경제적 측면을 고려할 때 텅스텐은 희소금속으로 납에 비해 가격이 약 25배 높아 납에 대한 대체물질로는 부적당한 것으로 사료되었다.