• 한국식품영양과학회지
• /
• 제19권3호
• /
• pp.263-269
• /
• 1990

Aqueous solution pigment produced by Steptomyces californicus KS-89 showed a vivid bluish purple pigment and purified by silica gel column chromatography. The pigment indicated a deep purple color zone by the C. I. E chromatic diagram and showed UV absorption maxima at 575nm. The color intensity in aqueous solution was fairly stable in the ranges of pH5-8 and was not affected by UV light however sometimes it had faded slightly by the heat. It was possible to prevent significantly by the addition of metal salt. Especially this pigment has no mutagenicity and antitumor activity and it appears to be devoid of antibiotic activity.

• 청정기술
• /
• 제3권2호
• /
• pp.74-86
• /
• 1997

최근 청정기술의 필요성이 증가하면서 막분리 공정에 의한 산업폐수 처리기술에 대한 관심이 높아가고 있다. 이 연구는 중화법과 water-splitting electrodialysis (WSED)를 이용하여 금속을 포함하고 있는 폐수에서 유용한 물질을 회수하고 무방류계를 실현하기 위한 것이다. 본 연구에서는 산폐수와 혼합폐수 처리의 공정 설계를 위한 공정의 흐름를 확립하였고, 이 공정에 따른 물질수지를 계산하였다. 또한 주요 단위공정인 침전조와 산회수공정의 운전인자에 대한 실험을 수행하였다. 침전공정에서는 KOH와 NaOH를 중화제로 이용하여 pH에 따른 침전효율과 슬러지양을 비교하였으며 산회수 공정에서는 KCl과 NaCl을 합성원료로 이용하여 WSED의 막구조에 따른 회수효율을 조사하였다.

• 대한기계학회논문집A
• /
• 제32권9호
• /
• pp.754-760
• /
• 2008

A two-photon induced photoreduction process suggests a possibility for fabricating complicated metallic microstructures which can be applied to 3-D micro-circuits and optical devices, etc. The process employs the photoreduction of silver ions in a metallic solution which is composed of metallic salt ($AgNO_3$) and watersoluble polymer ((poly(4-styrenesulfonique acid) 18wt. % in $H_2O$, $(C_8H_8O_3S)_n$)). In this process, the improvement of the resolution and the uniformity of fabricated metallic structures are important issues. To address these problems, continuous forming window (CFW) is obtained from a parametric study on the conditions of laser power and scanning velocity and the direct seed generation (DSG) method is proposed. Silver nano particles are uniformly generated in a metallic solution through the DSG method, which enables the decrease of a laser power to trigger the photoreduction of silver ions as well as the increase of metal contents in a metallic solution. So the two-photon induced photoreduction property of a metallic solution is improved. Through this work, precise silver patterns are fabricated with a minimum line width of 400 nm.

• 한국항만학회지
• /
• 제14권4호
• /
• pp.475-479
• /
• 2000

A possibility of the implementation of a quartz crystal sensor to the determination of chemical oxygen demand is examined by checking the electrochemical behavior of the sensor in a glucose solution. Since the surface of a quartz crystal has to be oxidized, a relatively active metal is coated on the surface of a usual 9 MHz AT-cut crystal. The electrochemical behavior is investigated by measuring the changes of current, resonant frequency and resonant resistance while a constant potential is applied. The crystal is installed in a specially designed container, and a quartz crystal analyzer is utilized to measure the frequency and resistance simultaneously. The variations of the measurements are examined at different concentrations of glucose solution, and a proper relation between the concentrations of glucose solution, and a proper relation between the concentration and the measurements is analyzed. As a result, it is found that a linear relation between the concentration of less than 900 ppm and the peak current when a constant potential of -180 mV (SSCE) is applied. The relation can be utilized for the determination of glucose concentration in sea water, and considering a direct relation between gluose concentration and chemical oxygen demand tells a possibility of the measurement of chemical oxygen demand using quartz crystal oscillators.

• 방사성폐기물학회지
• /
• 제3권2호
• /
• pp.85-93
• /
• 2005

Isotopes of alkali and alkaline earth metals (AM and AEM) are the main contributors to the heat load and the radiotoxicity of spent fuel (SF) . These components are separated from the SF and dissolved in a molten LiCl in an electrolytic reduction process. A mass transfer model is developed to describe the diffusion behavior of Cs, Sr, and Ba in the SF into the molten salt. The model is an analytical solution of Fick's second law of diffusion for a cylinder which is the shape of a cathode in the electrolytic reduction process. And the model is also applied to depict the concentration profile of the oxygen ion which is produced by the electrolysis of Li$_{2}$O. The regressed diffusion coefficients of the model correlating the experimentally measured data are evaluated to be greater in the order of Ba, Cs, and Sr for the metal ions and the diffusion of the oxygen ion is slower than the metal ions which implies that different mechanisms govern the diffusion of the metal ions and the oxygen ions in a molten LiCl.

• Journal of Radiation Protection and Research
• /
• 제27권2호
• /
• pp.95-100
• /
• 2002

원자력발전소에서 주로 발생되는 금속폐기물인 탄소강을 중성염전해질인 1.7M의 황산나트륨($Na_2SO_4$)과 질산나트륨($NaNO_3$)을 이용하여 기존전해제염과 개선된 전해제염공정의 비교실험을 수행하였다. 양극은 인코넬, 음극은 티타늄으로 하여 상온에서 1시간동안 반응시켜 금속폐기물 모재의 weight loss, 두께변화. 전해질 내 침전물농도, SEM을 이용하여 제염전후의 금속폐기물 표면의 형상을 분석하였다. 실험결과 개선된 전해제염 적용시 전해질 종류별 전류밀도 변화에 따른 실험에서는 전류밀도가 $0.1{\sim}0.6A/cm^2$으로 증가함에 따라 1.7M의 황산나트륨 적용시 금속폐기물 모재의 두께변화는 $0.48{\pm}0.005{\sim}67.7{\pm}0.02{\mu}m$, 1.7M의 질산나트륨 적용시에는 $0.06{\pm}0.005{\sim}17.7{\pm}0.05{\mu}m$로 나타나 같은 전류밀도에서 황산나트륨 적용시 금속폐기물 모재의 표면 제염효율이 더욱 높은 양상을 보였다. 또한 전류밀도 $0.3A/cm^2$ 및 1.7M의 황산나트륨의 조건에서 개선된 전해제염 적용 시 $9.8{\pm}0.01{\mu}m$의 금속폐기물 두께변화를 보여 기존전해제염 적용시인 $3.7{\pm}0.03{\mu}m$의 금속폐기물 두께변화보다 2배 이상의 표면 제염효과를 보였다.

• 대한화학회지
• /
• 제37권8호
• /
• pp.773-778
• /
• 1993

Tl$^+$이온 센서로서 크라운 에테르 B15C5와 DB18C6를 중성운반체로 한 PVC 액체막 이온 선택성 전극을 제작하였다. 막용매로는 DOA, NPPE 및 NPOE를 사용하였으며 친유성 염, KTClPB의 농도를 변화시킨 여러가지 조성의 막을 시험하였다. B15C5와 DB18C6 막 전극의 감응전위는 농도범위, 10$^{-1}$∼10$^{-5}$M에서 직선으로 나타났으며 최대 기울기는 전극에 따라서 40∼55 mV/decade였다. 선택계수는 분리용액법으로 결정하였으며 알카리금속 이온, 알칼리토금속 이온 및 일부 전이금속 이온에 대하여 좋은 선택성을 나타냈다. 제작된 액체막 전극은 Ph > 3 에서 안정한 감응전위를 보였다.

• Corrosion Science and Technology
• /
• 제12권1호
• /
• pp.12-26
• /
• 2013

This work focused on galvanic corrosion of carbon steel bolted GECM/Al plates by long-term test in tap water and NaCl solutions. Test product was carbon steel bolted between cross packed GECM and painted aluminium. Tests for the product and coupled parts determined corrosion rate in tap water and NaCl solutions. Also, using a potentiostat and salt water sprayer, galvanic test was done. In galvanic test on carbon steel bolted GECM/Al plates, corrosion of carbon steel bolt was faster in series of tap water>1% NaCl solution>3.5% NaCl solution. In galvanic couple between aluminium and carbon steel bolt, their corrosion rates were higher than those of single specimen. In galvanic couple between GECM, aluminium, and carbon steel bolt, corrosion behaviors of carbon steel bolt and aluminium were changed due to different corrosion mechanism in tap water and chloride solution.

• 한국환경과학회지
• /
• 제13권4호
• /
• pp.435-440
• /
• 2004

The thiophene or furan-containing hexadentate ligands 1, 12-bis (2-theophene )-2,5,8,ll-tetraazadodecane(Thiotrien ㆍ 4HCl) and 1,12-bis (2-furan)-2,5,8,11-tetraazadodecane(Furatrienㆍ4HC1) were synthesized as their tetrahydrochloride salt and characterized by EA, IR, NMR, and Mass spectrum. Their protonation constants (logK$_{nH}$) and stability constants (logK$^{M}_{L}$ for Cd$^{2+}$, Pb$^{2+}$, $Zn^{2+}$ and Cu$^{2+}$ ions were determined in aqueous solution by potentiometry and compared with 1, 12-bis(2-pyridyl)-2,5,8, 11-tetra-azadodecane(Pytrien) of pyridyl-containing ligand. The effect stability constants of ligands and metal ion for removal of heavy metals in aqueous solution were described.

• 자원리싸이클링
• /
• 제30권2호
• /
• pp.31-38
• /
• 2021

철(III)과 란타넘(III)이 혼합된 황산용액에서 황산나트륨에 의한 란타넘 복염의 침전 및 분리를 조사했다. 복염 침전에 영향을 줄 수 있는 여러 요인 중 황산나트륨 및 란타넘(III)의 농도, 반응온도 및 시간, 그리고 철(III) 농도에 대해 조사했다. 용액 중 Na+, SO42- 이온 및 란타넘(III) 농도가 높을수록 희토류 복염의 침전률이 증가했고, 반응온도가 100℃까지 증가함에 따라 란타넘 황산염 이온의 형성을 촉진해 희토류 복염의 침전률이 증가했다. 또한 반응시간이 증가할수록 철(III)의 침전률이 감소해 3시간 이후에는 거의 침전되지 않았고, 철(III) 농도는 복염 침전에 큰 영향을 미치지 않았다. 황산용액에 황산나트륨을 첨가하면 란타넘(III)을 선택적으로 침전시켜 철(III)과 분리할 수 있다.