• Korean Journal of Optics and Photonics
• /
• v.22 no.6
• /
• pp.269-275
• /
• 2011

We propose a metal-dielectric hybrid waveguide structure consisting of a single metal nanowire placed on a flat dielectric slab. Mode size and propagation loss of the surface-plasmons confined in the metal-dielectric gap are compared with those of the complementary structure with a dielectric nanowire on a metal surface. In the case of the nanowire's diameter much smaller than the wavelength the two structures reveal quite different characteristics; the dielectric nanowire-on-metal has longer propagation distance, but only the metal nanowire-on-dielectric exhibits a mode size two fold smaller than the diffraction limit. The proposed hybrid structure may therefore be more suitable for realization of nanocavity lasers.

• Current Optics and Photonics
• /
• v.1 no.4
• /
• pp.364-371
• /
• 2017

Compared to one made of glass, an aluminum mirror features light weight, compact design, low cost, and quick manufacturing. Reflective mirrors and supporting structures can be made from the same material, to improve the athermal performance of the system. With the rapid development of ultraprecise machining technologies, the field of applications for aluminum mirrors has been developed rapidly. However, most of them are rotationally symmetric in shape, and are used for infrared applications. In this paper, the design and manufacture of an off-axis aluminum mirror used for a three-mirror-anastigmat (TMA) optical system at visible wavelengths is presented. An optimized, lightweight design provides a weight reduction of more than 40%, while the surface deformation caused by earth's gravity can meet the required tolerance. The two pieces of an off-axis mirror can be diamond-turned simultaneously in one setup. The centrifugal deformation of the off-axis mirror during single-point diamond turning (SPDT) is simulated through the finite-element method (FEM). The techniques used to overcome centrifugal deformation are thoroughly described in this paper, and the surface error is reduced to about 1% of the original value. After post-polishing, the form error is $1/30{\lambda}$ RMS and the surface roughness is better than 5 nm Ra, which can meet the requirements for visible-light imaging.

• Korean Journal of Optics and Photonics
• /
• v.20 no.5
• /
• pp.272-275
• /
• 2009

In order to enhance the background noise filtering performance of the white light interferometry(WLI), we demonstrate the noise filtering performance of preprocessing of the measured fringe signals. The WLI was realized through a mirau interferometer which was equipped with a green LED. When measuring large-height and rough surface objects, the illumination optics are considered the numerical aperture(NA) and the depth of focus(DOF). In this case, the limited NA of the illumination optics has a considerable impact on the interference fringe. Therefore, we propose a preprocessing method that uses the intensity difference between the measured intensity and the moving average intensity. The performance is demonstrated by measuring an array of metal solder balls fabricated on printed circuit board(PCB). The proposed method reduces the noise pixels by 15 percent.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.51-55
• /
• 2004

Surface plasmons (SPs) are charge density oscillations that propagate along an interface between a dielectric and metal. In this paper, the electric field of SPs and the intereference of two SPs are observed by using Near-field Scanning Optical Microscope (NSOM). The excitation condition of SPs is changed as the optical tip approaches the metal surface, because the excitation condition of SPs is very sensitive to surface structures. To measure the microscope field of SPs, the distance between metal surface and optical tip must contain a specific interval.

• Korean Journal of Optics and Photonics
• /
• v.12 no.6
• /
• pp.437-445
• /
• 2001

We examine theoretically the properties of the force on Mie particles induced by evanescent fields at a system of multilayer films (including a metal film), at which the surface plasmon resonance is excited by a p-polarized plane electromagnetic wave. An expression of the surface plasmon-coupled evanescent fields produced in Kretschmann (or Sarid) geometry is expanded in terms of vector spherical wave functions, while multiple reflections between the Mie particle and the metal boundary are taken into account. The Cartesian components of the force on Mie particles by the evanescent fields are analytically formulated and numerically evaluated. The force components are increased by one or two orders of magnitude at metal boundaries over those at dielectric boundaries. As a result, we can confirm the possibility of stable manipulation or rotation of a finite-sized object by forces of surface plasmon-coupled evanescent fields.

• Current Optics and Photonics
• /
• v.6 no.6
• /
• pp.583-589
• /
• 2022

Vanadium dioxide (VO₂) is a well-known material that undergoes insulator-to-metal phase transition near room temperature. Since the conductivity of VO₂ changes several orders of magnitude in the terahertz (THz) spectral range during the phase transition, VO₂-based active metamaterials have been extensively studied. Experimentally, it is reported that the metal nanostructures on the VO₂ thin film lowers the critical temperature significantly compared to the bare film. Here, we theoretically studied such early transition phenomena by developing an analytical model. Unlike experimental work that only measures transmission, we calculate the reflection and absorption and demonstrate that the role of absorption is quite different for bare and patterned samples; the absorption gradually increases for bare film during the phase transition, while an absorption peak is observed at the critical temperature for the metamaterials. In addition, we also discuss the gap width and VO₂ thickness effects on the transition temperatures.

• Current Photovoltaic Research
• /
• v.2 no.3
• /
• pp.130-134
• /
• 2014

We have fabricated the selective emitter solar cell using double textured nanowires structure. The $40{\times}40mm2$-sized silicon substrates were textured to form the pyramid-shaped surface and the nanowires were fabricated by metal assisted chemical etching process using Ag nanoparticles, subsequently. The heavily doped and shallow emitters for selectiv eemitter solar cells were prepared through the thermal $POCl_3$ diffusion and chemical etch-back process, respectively. The front and rear electrodes were prepared following conventional screen printing method and the widths of fingers have been optimized. The selective emitter solar cell using double textured nanowires structure achieved a conversion efficiency of 17.9% with improved absorption and short circuit current density.

• Journal of Radiation Industry
• /
• v.3 no.1
• /
• pp.1-5
• /
• 2009

The variation of MgO surfaces, in which fluorine was contained (F-MgO), by high energy electron-beam (EB) was studied using X-ray photoelectron spectroscopy (XPS). Fluorine on the MgO surface was eliminated by EB treatment with the consequence that the electronic structures of Mg, O and C were varied. Moreover, as a result of oxidation of carbon species on the surface by high dose EB treatment (90 kGy), the concentration of carbonate and carboxyl species on the surface was increased. In this experiment, it was confirmed that the structure of oxidized metal surface can be adjusted by varying conditions of EB treatment (energy and dose). This result implies that EB can be applied for developing new catalysts.

• Journal of the Korean Electrochemical Society
• /
• v.27 no.3
• /
• pp.81-87
• /
• 2024

Nanomaterial electrodes are used to improve the analytical performances of electrochemical measurements in biological and chemical field. Frequently used methods for fabricating metal nanostructures are solution processing and electrodeposition. In the solution process, it is possible to control the characteristics (e.g., direction) of metal growth by using capping agents, thereby fabricating nanoparticles of specific structures. In the electrodeposition, the electrode surface and the deposited metal atoms are in direct contact. Each process has its own limitation as well, and many studies are conducted to overcome such limitation. In this paper, we report an integration of the two fabrication methods and the characteristics, such as structural and electrochemical properties, of the fabricated electrodes. Lastly, we discuss the possibility of using the fabricated nanostructured electrode as a sensor.

• Korean Journal of Optics and Photonics
• /
• v.21 no.1
• /
• pp.12-15
• /
• 2010

In this paper, we have proposed and demonstrated a simple fiber-optic temperature sensor based on the bending loss of a TEC(thermally expended core) fiber attached to a bi-metal. The deformation of the bi-metal caused by the change in its temperature induces the bending loss of the TEC fiber. The experimental result shows that the temperature sensitivity and operation temperature range of the device are controllable through the adjustment of the structure of the expanded core fiber. The fabrication procedure of the device is described in detail.