• 공업화학
• /
• 제7권3호
• /
• pp.416-423
• /
• 1996

Co(II), Ni(II), Cu(II) 및 Mn(II)의 네자리 Schiff base 전이금속 화합물들이 첨가된 1.5 M $LiAlCl_4/SOCl_2$ 전해질 용액에서 $SOCl_2$에 관한 전기 화학적 환원 반응을 조사하였다. 이들 전이 금속(II) 착물들은 먼저 전극 표면에 흡착된 후 촉매로써 작용하였으며, 각각의 전이 금속(II) 착물들의 촉매 화합물에 대해 $SOCl_2$를 환원시킬 수 있는 최적 조건의 농도를 나타냈다. 촉매가 첨가된 전해질 용액에서 $SOCl_2$의 환원 반응에 대한 환원 전류는 최고 150% 정도 증가하였다. 주사 속도가 증가함에 따라 $SOCl_2$의 환원 전류는 증가하였고 환원 전위는 음 전위 방향으로 이동되었으며, $SOCl_2$의 환원 과정은 확산 지배적인 반응으로 진행되었다.

• Corrosion Science and Technology
• /
• 제20권6호
• /
• pp.361-366
• /
• 2021

Localized corrosion behavior of Ni-based Inconel 718 alloy was investigated by electrochemical anodic polarization techniques in NACE TM 0177 A solution of 5 wt% NaCl + 0.5 wt% acetic acid at room temperature. After the solution heat treated at 1080 ℃ for 2.5 h, Inconel 718 was age-hardened at 780 ℃ for 8 h. The microstructure of the alloy surface was investigated by optical microscopic or scanning electron microscopic technique. The austenitic phase with the presence of metal carbides was observed on the surface of Inconel 718. Metal-carbides such as Nb-Mo and Ti-carbide with diameters of approximately 10 and 3 ㎛, respectively, were formed in Inconel 718. Anodic polarization results revealed that localized corrosion was observed at the interface between austenitic phase of a substrate and metal carbides. Difference in electrochemical property between a metal carbide and an austenitic substrate could provide an initiation site for localized corrosion of Inconel 718 surface.

• The Journal of Advanced Prosthodontics
• /
• 제9권2호
• /
• pp.118-123
• /
• 2017

PURPOSE. To investigate the effect of non-thermal atmospheric pressure plasma (NTAPP) treatment on shear bond strength (SBS) between resin cement and colored zirconia made with metal chlorides. MATERIALS AND METHODS. 60 zirconia specimens were divided into 3 groups using coloring liquid. Each group was divided again into 2 sub-groups using plasma treatment; the experimental group was treated with plasma, and the control group was untreated. The sub-groups were: N (non-colored), C (0.1 wt% aqueous chromium chloride solution), M (0.1 wt% aqueous molybdenum chloride solution), NP (non-colored with plasma), CP (0.1 wt% aqueous chromium chloride solution with plasma), and MP (0.1 wt% aqueous molybdenum chloride solution with plasma). Composite resin cylinders were bonded to zirconia specimens with MDP-based resin cement, and SBS was measured using a universal testing machine. All data was analyzed statistically using a 2-way ANOVA test and a Tukey test. RESULTS. SBS significantly increased when specimens were treated with NTAPP regardless of coloring (P<.001). Colored zirconia containing molybdenum showed the highest value of SBS, regardless of NTAPP. The molybdenum group showed the highest SBS, whereas the chromium group showed the lowest. CONCLUSION. NTAPP may increase the SBS of colored zirconia and resin cement. The NTAPP effect on SBS is not influenced by the presence of zirconia coloring.

• Fibers and Polymers
• /
• 제3권1호
• /
• pp.14-17
• /
• 2002

Development of a novel fixed site carrier membrane (FCM), supported by PET fabric for metal ion separation is reported. The membranes were prepared by dipping PET fabric into the methylene chloride solution of Poly(5-vinyl-m-phe-nylene-m'-phenylene-32-crown-10) (P(VCE)), a polymeric metal ion carrier. It was found that the flux of mono-valent metal ion transported across the membrane is signif=cantly differed from each other and the flux decreases in the order $Cs^+$>$Rb^+$>$K^+$>$Na^+$>$Li^+$ irrespective to the anion except perchlorate anion. It was explained in terms of the stability of the complex, formed by crown ether unit of the P(VCE) and the various metal ions, meanwhile, the lower rate of transport in the presence of perchlorate anion was ascribed to its low hydrophilicity.

• 한국결정성장학회지
• /
• 제27권6호
• /
• pp.303-308
• /
• 2017

여러 가지 금속을 에칭하기 위하여 사용된 $FeCl_3$ 폐용액은 유가금속인 니켈을 함유하고 있다. 본 연구에서는 염화철을 재생하고 남은 니켈 함유 에칭폐액으로부터 니켈을 고순도의 탄산니켈 결정분말로 회수하고자 하였다. 5 % NaOH 수용액을 이용하여 pH 4의 조건에서 1차적으로 철 성분의 불순물을 약 97 % 제거하고 추가적으로 남은 불순물을 제거하기 위하여 용매추출제 D2EHPA(Di-(2-ethylhexyl) phosphoric acid)를 사용하여 불순물로서 존재하는 금속이온들을 약 99% 제거하였다. 그 후 불순물이 제거된 염화니켈 용액에 탄산나트륨과의 반응을 통하여 99.9 % 이상의 순도를 가진 탄산니켈분말을 얻을 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제25권10호
• /
• pp.1484-1488
• /
• 2004

The thiocyanate-selective PVC membrane electrodes based on 5,10,15,20-tetrakis(2,4,6-trimethylphenyl)-porphyrinatomanganese(III) chloride [Mn(TMP)Cl] and 5,10,15,20-tetrakis(2,6-dichlorophenyl)porphyrinatomanganese(III) chloride $[Mn(Cl_8TPP)Cl]$ as ion carriers were investigated. The effect of ionophores, membrane compositions, plasticizers, and solution pHs on the response characteristics were studied. The Mn(TMP)Cl as an ionophore shows the best potentiometric sensitivity with a slope of -58.7 mV/decade and a detection limit of $log[SCN^-]$ = -6.90, and selectivity for thiocyanate over strong hydrophobic interfering anions such as ${ClO_4}^-$ and salicylate. The potentiometric response is affected by the electronic effect of the substituents and solution pHs. The presence of substituents with electron donating and more liphophilic characters around the ligated metal center produces an improved response toward $SCN^-$.

• 한국표면공학회지
• /
• 제48권3호
• /
• pp.73-81
• /
• 2015

Chloride plating solution was fabricated by dissolving metal Ni powders in solution with HCl and deionized water. Effects of deposition conditions on the properties of Ni films electrodeposited from chloride baths were studied. Current efficiency of Ni films electrodeposited from the baths containing saccharin was decreased with increasing the current density. Residual stress of Ni thin films ware measured to be about 230 ~ 435 MPa in the range of current density of $10{\sim}25mA/cm^2$. Cathode current efficiency in baths without saccharin was initially increased with increasing pH, while it was decreased with increasing pH further. Cathode current efficiency in baths with saccharin (except at pH 2) exhibited less 10 ~ 20% than that in baths without saccharin. Residual stress of Ni films electrodeposited from baths without saccharin was measured to be 388 ~ 473 MPa in the range of pH 2 ~ pH 5 and then was increased to 551 MPa at pH 6. On the other hand, residual stress of Ni films electrodeposited from baths with saccharin was increased with increasing pH. Surface morphology was strongly affected by the change of current density, but slightly by solution pH and addition of saccharin.

• 한국표면공학회지
• /
• 제52권2호
• /
• pp.78-83
• /
• 2019

Chloride baths for electrodeposited Ni thin films were fabricated by dissolving metal Ni powders with the mixed solution consisting of HCl and de-ionized water. Current efficiency, residual stress, surface morphology and microstructure of Ni films with the change of metal ion ($Ni^{2+}$) concentrations in the plating solution were studied. Current efficiency was measured to be more than 90% with increasing $Ni^{2+}$ concentrations in the plating solution. Residual stress of Ni thin film was increased from about 400 to 780 MPa with increasing $Ni^{2+}$ concentration from 0.2 to 0.5 M. It is gradually decreased to 650 MPa at 0.9 M $Ni^{2+}$ concentration. Smooth surface morphologies were observed over 0.3 M $Ni^{2+}$ concentration, but nodule surface morphology at 0.2 M. Ni films consist of FCC(111), FCC(200), FCC(220) and FCC(311) peaks in XRD patterns. Preferred orientation of FCC(111) was observed and its intensity was slightly decreased with increasing $Ni^{2+}$ concentration. The average grain size was slightly increased at 0.3 M $Ni^{2+}$ concentration and then slightly decreased with increasing $Ni^{2+}$ concentration.

• 자원리싸이클링
• /
• 제22권6호
• /
• pp.55-63
• /
• 2013

본 연구에서는 전기화학법으로 생성된 염소를 산화제로 이용하여 루테늄의 침출에 대한 연구를 수행하였다. 휘발성 루테늄산화물의 손실을 막기 위해 전 시스템이 밀폐형으로 제작된다. 루테늄의 침출의 최적조건을 조사하기 위해 pH, 온도, 전해 염소 생성시 인가전류 등의 영향을 조사하였다. 염소전해생성 시스템에 산화전류를 인가하여 염소가스를 발생시키고 침출조에 공급하여 루테늄 용해에 필요한 염소화합물을 생성시켰다. 산화제인 염소화합물의 농도가 포화상태에 도달하였을 때 루테늄 분말시료를 장입하고 침출반응을 진행하였다. 일정시간 간격으로 침출액을 채취하면서 루테늄 침출농도를 분석하였다. 본 실험결과 최적조건은 pH 10, 2 A, $40^{\circ}C$로 이 때 침출률은 88% 이다.

• 한국분말재료학회지
• /
• 제25권2호
• /
• pp.120-125
• /
• 2018

Boron nitride nanotubes (BNNTs) are receiving great attention because of their unusual material properties, such as high thermal conductivity, mechanical strength, and electrical resistance. However, high-throughput and high-efficiency synthesis of BNNTs has been hindered due to the high boiling point of boron (${\sim}4000^{\circ}C$) and weak interaction between boron and nitrogen. Although, hydrogen-catalyzed plasma synthesis has shown potential for scalable synthesis of BNNTs, the direct use of $H_2$ gas as a precursor material is not strongly recommended, as it is extremely flammable. In the present study, BNNTs have been synthesized using radio-frequency inductively coupled thermal plasma (RF-ITP) catalyzed by solid-state ammonium chloride ($NH_4Cl$), a safe catalyst materials for BNNT synthesis. Similar to BNNTs synthesized from h-BN (hexagonal boron nitride) + $H_2$, successful fabrication of BNNTs synthesized from $h-BN+NH_4Cl$ is confirmed by their sheet-like properties, FE-SEM images, and XRD analysis. In addition, improved dispersion properties in aqueous solution are found in BNNTs synthesized from $h-BN+NH_4Cl$.