• YAKHAK HOEJI
• /
• v.13 no.1
• /
• pp.22-27
• /
• 1969

Nicotinamide Complex Compound was not formed in simple alkaline solution under two to one molar ratio of dimethyglyoxime and Fe (II), but it was formed with ammonia or pyridine under the same molar ratio. Based on this fact, nicotinamide solution was added into dimethyglyoxime-Fe (II) complex solution, and the chelation product was extracted with chloroform. The extraction was Completed in a range of pH 8.4-11.0. The chloroform solution shows stability and maximum absorption at 516 m${\mu}$.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.5
• /
• pp.399-402
• /
• 1990

Activation parameters of the exchange between two types of glycinate groups in (nitrilotriacetato)dioxovanadate(V) ion, $[VO_2(NTA)]^{2-}$, have been determined as the results of $^{13}C$ NMR measurements over a range of temperatures between 277 and 306$^{\circ}K$. The exchange mechanism is proposed on the basis of the chelate ring opening-closing process, assuming rupture of the metal-oxygen (glycinate) bond trans to V = O bond to give a five-coordinated intermediate.

• YAKHAK HOEJI
• /
• v.13 no.2_3
• /
• pp.97-100
• /
• 1969

As a part of an effort to find a relationship between metal chelation and its chemotherapeutic activity change for sulfa drugs, Sulfadimethoxine, Sulfamerazine Sulfamethoxy-pyridazine-Cu(II) complex compounds were studied through IR spectra.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.2
• /
• pp.98-103
• /
• 1990

Fibrous adsorbents containing amidoxime group which make chelate complexes with uranyl ions are studied for the recovery of uranium from sea water. Acrylic fibers are used as base Polymer. The adsorption properties of uranium are carried out to examine pH effect, concen-tration dependence, adsorption rate, separation, and chelate complex. The results obtained are as follows; 1. Metal capacity of U (VI) ion is in the range of pH $2\~10.2$. Amidoxime group-containing fiber recover U (VI) ions existed in sea water or waste water in extremely small quantities. 3. Using amidoxime group-containing fiber Cu (II) and U (VI) are separated with each other in dilute nitric acid solution (pH 2.3). 4. U (VI) chelate complexes are conformed by tridendate ligands, which are coordinated with one nitrogen and two oxygens onto amidoxime group-containing fiber.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.590-594
• /
• 2011

An aminocarboxy aspartic acid-bonded silica (Asp-Silica) stationary phase was synthesized using L-aspartic acid as ligand and silica gel as matrix. The standard protein mixtures were separated with prepared chromatographic column. The effects of solution pH, salt concentration and metal ion on the retention of proteins were examined, and also compared with traditional iminodiacetic acid-bonded silica (IDA-Silica) column. The results show that Asp-Silica column exhibited an excellent separation performance for proteins. The retention of proteins on Asp-Silica stationary phase was consistent with electrostatic characteristic of cation-exchange. The stationary phase displayed typical metal chelate property after fixing copper ion (II) on Asp-Silica. Under competitive eluting condition, protein mixtures were effectively isolated. Asp ligand showed better ion-exchange and metal chelating properties as compared with IDA ligand.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.4
• /
• pp.122-129
• /
• 2012

In this study, environmental problems(i.e., pH elevation and $Cr^{6+}$ detection) occurred by using the cement grout made from CA(calcium aluminate) were evaluated using viscosity agents(MC, chelate polymer). Ordinary portland cement and blaste-furnace slag cement were used by main materials and ACC(blended mixture of calcium aluminate) were used by accelerator for hardening of grout. In addition, viscosity agents were used for preventing pH elevation and heavy metal detection from grouting materials. From the results, it was noted that when chelate polymer was used, pH elevation and $Cr^{6+}$ detection were minimized. However, other cases showed higher pH elevation and $Cr^{6+}$ detection. At test 1 day, $Cr^{6+}$ detection with age presented over 97% of total value and, after that, additional increase was not distinct. As a result of this study, it was acknowledged that, to control pH elevation and heavy-metal (like $Cr^{6+}$) detection, the usage of BSC and chelate polymer is a very useful fact.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1018-1023
• /
• 2006

The metal chelate complex of aluminum 8-hydroxyquinolines $(Alq_3)$ is an important electro-luminescent (EL) material used in fabricating organic light emitting (OLEDs). In this work, diodes / displays using in house synthesized $Alq_3$ and simple structure have been fabricated. It is demonstrated that luminance of $12460\;cd/m^2$ and efficiency of 3.1 cd/A are achievable in these fluorescent devices. Possible degradation effects are analyzed.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.5 no.1
• /
• pp.61-68
• /
• 2019

Purine type compounds has been recently reported to cause the death for lung cancer cell, related to microtubules-targeting agents (MTAs). Therefore it can be used to develop as theranostic radiopharmceuticals in nuclear medicine or gadolinium-based MRI imaging agents by chelate chemistry. In the study, we tried to chemically bind a DOTA chelate on the end of purine compound and obtained a specific conjugate of DOTA-purine for metal coordination. In particular, radiometal like Cu-64, for the development of MRI imaging agents, can be utilized to choice good candidates before the synthesis of gadolinium complexes. By the screening of radioisotope technique, Gd-DOTA-purine type complex was successfully prepared and showed MRI imaging for lung cancer cell into the mouse model.

• Journal of Environmental Health Sciences
• /
• v.1 no.1
• /
• pp.21-27
• /
• 1974

This work was carried out to investigate the chemical properties of the chelate compounds which were produced with 2-methoxy-5-nitrophenol(MNG) and metal salt such as copper nitrate and manganese nitrate. And obtained results were as in the followings. 1) The binding ratio of the chelate compounds formation were determined by using the molar ratio concentration method and their chemical structures were identified by IR-spectrum. 2) In the absorbance measuring, 2-methoxy-5-nitrophenol coordinated with manganese and copper showed the maximum absorbance at $430 m\mu$ and $410 m\mu$ respectively. 3) The binding ratio of chelated compounds were measured by molar ratio method and continuous variation method with spectrophotometer, which was identified as 1:2. 4) The conditional formation constant(log Kn value) of manganese and copper chelate compounds were 6.70, 6.75, respectively according to the equation of $log\frac{A-AM\circ n MNG}{AMm MNG-A}=n log (M\circ)+log Kn$ 5) The dissociations degree of manganese and copper chelate compound were $2, 300{\times} 10^{-7}$, $2, 346{\times} 10^{-7}$ respectively according to the molar calculation method.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.3
• /
• pp.56-64
• /
• 2019

Various approaches have been attempted to develop recycling technologies related to industrial waste resources containing metals. Among them, glass is not decomposed into microorganisms, so landfill is not suitable, and interest in the recycling of waste glass is increasing. In this paper, by incorporating chelate resin to suppress the elution of heavy metals in waste glass and using waste glass as a fine aggregate and we want to evaluate the strength, drying shrinkage, alkali-silica reaction and heavy metal leaching of shielded filler materials and to provide basic data for utilizing waste glass as an economical and environmentally friendly shielding filler. As a result of the test, it was found that the use of waste glass as a fine aggregate was effective in the development of strength, but the incorporation of chelate resin had an influence on the strength development. In addition, the addition of chelate resin was effective in improving drying shrinkage but it was found to affect the alkali - silica reaction. As a result of the heavy metal leaching test, the KSLP test method satisfies all the criteria for heavy metal leaching. However, in case of lead, the limit of US ANSI 67-2007a was exceeded and further study should be done.