• Journal of the Korean Applied Science and Technology
• /
• v.26 no.4
• /
• pp.415-421
• /
• 2009

Esterification reaction between succinic acid[SA] and 1,4-butanediol [BD} was kinetically investigated in the presence of organic metal catalysts (alkyl-silver oxide(ASO),CAT 100E) at $150{\sim}190^{\circ}C$. The reaction rates measured by the amount of distilled water from the reaction vessel. The esterification reaction was carried out under the first order kinetics with respect to the concentration of reactants and catalyst, respectively. The overall reaction order was 2nd. From the examination of relationship between apparent reaction rate constants and reciprocal absolute temperature, the activation energy has been calculate as 146.70 kJ/mol with ASO catalyst and 43.04 kJ/mol with CAT 100E catalyst.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05a
• /
• pp.60-65
• /
• 2004

The possibility of mechano-chemical synthesis and influence of mechanical activation on thermal synthesis of borides and boron carbides of mass-low metals is investigated. The opportunity of mechanochemical synthesis in the mill AGO-2 of such compounds as Al $B_2$and Ca $C_2$ $B_2$is established. Influence of mechanical activation in the mill SPEX 8000 on synthesis of such compound as $Mg_{0.5}$A $l_{0.5}$ $B_2$is shown. Features of synthesis in systems containing metal magnesium are considered.d.d.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.5
• /
• pp.45-51
• /
• 1997

Low temperature activation of dopants which were doped using ion mass doping system in amorphous silicon(a-Si) thin films was investigated. With a 20.angs.-thick Ni film on top of the a-Si thin film, the activation temperature of dopants lowered to 500.deg. C. When the doping was performaed after the deposition of Ni thin film on the a-Si thin films (post-doping), the activation time was shorter than that of dopants mass, the activation time of the dopants doped by pre-doping method increased. It turned NiSi2 formation, while the decrease of activation time was mainly due to the enhancement of the NiSi2 formation by mixing of Ni and a-Si at the interface of Ni and a -Si thin during the ion doping process.

• Fisheries and Aquatic Sciences
• /
• v.13 no.2
• /
• pp.112-117
• /
• 2010

Altered mRNA expression of two metallothionein isoforms (MT-IA and MT-IB) in response to acute heavy metal exposure was examined in mud loach, Misgurnus mizolepis, fry using a real-time RTPCR assay. Sublethal exposure (1 or 5 ${\mu}M$) to Cd, Cr, Fe, Mn, Ni, and Zn resulted in highly variable transcriptional responses of the two MT isoforms to the heavy metal ions, including upregulation, a steady state, and downregulation. Overall, the most potent inducer of both MT isoforms was Cd (up to 6-fold). Another exposure experiment using a series of doses of Cu revealed that the stimulation patterns of the two MT isoforms differed: MT-IA transcription was soon saturated at higher concentrations (about 2-fold at 1-4 ${\mu}M$ of Cu), whereas the activation of MT-IB was more dependent on the treatment dose (increased up to 5-fold at 3 ${\mu}M$). The isoform-specific allotment of constitutive and inducible functions was not as clear in fry as in adult tissues. Coordinated interaction between the MT-IA and MT-IB isoforms was hypothesized based on the finding that MT-IA represented a primary action under 'less stressful' or 'sublethal' conditions, whereas the activation of MT-IB became important under 'more stressful' or 'lethal' circumstances in this species.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.9
• /
• pp.1444-1450
• /
• 2003

The fatigue life and tensile strength of JLF-1 steel (Fe-9Cr-2W-V-Ta) and its TIG weldment were investigated at the room temperature and $400^{\circ}C$. Four kinds of test specimens, which associated with the rolling direction and the TIG welding direction were machined. The base metal of JLF-1 steel represented almost anisotropy in the tensile properties for the rolling direction. And the base metal of JLF-1 steel showed lower strength than that of TIG weldment. Also, the strength of all materials entirely decreased in accordance with elevating test temperature. Moreover, the fatigue limit of weld metal was largely increase than that of base metal at both temperatures. The fatigue limit of JLF-1 steel decreased in accordance with elevating test temperature. The fatigue limit of JLF-1 steel decreased in accordance with elevating test temperature. The SEM fractography of tensile test specimen showed conspicuous cleavage fracture of a radial shape. In case of fatigue life test specimen, there were so many striations at crack initiation region, and dimple was observed at final fracture region as a ductile fracture mode.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.4
• /
• pp.253-254
• /
• 1988

• Journal of the Korean Society of Combustion
• /
• v.8 no.2
• /
• pp.27-33
• /
• 2003

Synthesis of carbon nanomaterials on a metal substrate by an ethylene fueled inverse diffusion flame was illustrated. Stainless steel plates were used for the catalytic metal substrate. The effects of catalyst metal particles were investigated through $Fe(NO_3){_3}$ (ferric nitrate, nonahydrate) and $Ni(NO_3){_2}$ (nickel nitrate, hexahydrate). Carbon nanotubes and nanofibers with diameters of $30{\sim}70nm$ were found on the substrate for the case of using SUS304 substrates only and using them with metal nitrates. In case of using metal nitrates, due to the easy activation of the metal particles, the formation and growth of carbon nanomaterials were occurred in the lower temperature region than that of using SUS304 substrates only.

• Nuclear Engineering and Technology
• /
• v.50 no.1
• /
• pp.182-189
• /
• 2018

A neutron generation system was developed to induce fissile fission in a lead slowing down spectrometer (LSDS) system. The source neutron is one of the key factors for LSDS system work. The LSDS was developed to quantify the isotopic contents of fissile materials in spent nuclear fuel and recycled fuel. The source neutron is produced at a multilayered target by the (e,${\gamma}$)(${\gamma}$,n) reaction and slowed down at the lead medium. Activation analysis of the target materials is necessary to estimate the lifetime, durability, and safety of the target system. The CINDER90 code was used for the activation analysis, and it can involve three-dimensional geometry, position dependent neutron flux, and multigroup cross-section libraries. Several sensitivity calculations for a metal target with different geometries, materials, and coolants were done to achieve a high neutron generation rate and a low activation characteristic. Based on the results of the activation analysis, tantalum was chosen as a target material due to its better activation characteristics, and helium gas was suggested as a coolant. In addition, activation in a lead medium was performed. After a distance of 55 cm from the lead surface to the neutron incidence, the neutron intensity dramatically decreased; this result indicates very low activation.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.1
• /
• pp.9-16
• /
• 2017

Hydrogen forms metal hydrides with some metals and alloys leading to solid-state storage under moderate temperature and pressure that gives them the safety advantage over the gas and liquid storage methods. However, it has disadvantages of slow hydrogen adsorption-desorption time and low thermal conductivity. To improve characteristics of metal hydrides, it is important that activation and thermal conductivity of metal hydrides are improved. In this study, we have been investigated hydrogen storage properties of Hydralloy C among Ti-Mn alloys. Also, the characteristics of activation and thermal conductivity of Hydralloy C were enhanced to improve kinetics of hydrogen adsorption-desorption. As physical activation method, PHEM (planetary high energy mill) was performed in Ar or $H_2$ atmosphere. Hydralloy C was also activated by $TiCl_3$ catalyst. To improve thermal conductivity, various types of ENG (expanded natural graphite) were used. The prepared samples were compacted at pressure of 500 bar. As a result, the activation properties of $H_2$ PHEM treated Hydralloy C was better than the other activation methods. Also, the amounts of hydrogen storage showed up to 1.6 wt%. When flake type ENG was added to Hydralloy C, thermal conductivity and hydrogen storage properties were improved.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.10
• /
• pp.678-686
• /
• 2001

Origins for the transconductance dispersion and the gate leakage current in a GaAs metal semiconductor field effect transistor were found using capacitance deep-level transient spectroscopy (DLTS) measurements. In DLTS spectra, we observed two surface states with thermal activation energies of 0.65 $\times$ 0.07 eV and 0.88 $\times$ 0.04 eV and an electron trap EL2 with thermal activation energy of 0.84 $\times$ 0.01 eV. Transconductance was decreased in the frequency range of 5.5 Hz ~ 300 Hz. The transition frequency shifted to higher frequencies with the increase of temperature and the activation energy for the change of the transition frequency was determined to be 0.66 $\times$ 0.02 eV. From the measurements of the gate leakage current as a function of the device temperature, the forward and reverse currents are coincident with each other below gate voltages lower than 0.15 V, namely Ohmic behavior between gate and source/drain electrodes. The activation energy for the conductance of electrons on the surface of MESFET was 0.63 $\times$ 0.01 eV. Comparing activation energies obtained by different measurements, we found surface states H1 caused the transconductance dispersion and the fate leakage current.