Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

Activation analysis of targets and lead in a lead slowing down spectrometer system

  • Lee, Yongdeok (Fuel Cycle Strategy Development Division, Korea Atomic Energy Research Institute) ;
  • Kim, Jeong Dong (Department of Nuclear Engineering, Sejong University) ;
  • Ahn, Seong Kyu (Fuel Cycle Strategy Development Division, Korea Atomic Energy Research Institute) ;
  • Park, Chang Je (Department of Nuclear Engineering, Sejong University)
  • Received : 2017.06.02
  • Accepted : 2017.11.06
  • Published : 2018.02.25
Download PDF
⟨ Previous Next ⟩

Abstract

A neutron generation system was developed to induce fissile fission in a lead slowing down spectrometer (LSDS) system. The source neutron is one of the key factors for LSDS system work. The LSDS was developed to quantify the isotopic contents of fissile materials in spent nuclear fuel and recycled fuel. The source neutron is produced at a multilayered target by the (e,${\gamma}$)(${\gamma}$,n) reaction and slowed down at the lead medium. Activation analysis of the target materials is necessary to estimate the lifetime, durability, and safety of the target system. The CINDER90 code was used for the activation analysis, and it can involve three-dimensional geometry, position dependent neutron flux, and multigroup cross-section libraries. Several sensitivity calculations for a metal target with different geometries, materials, and coolants were done to achieve a high neutron generation rate and a low activation characteristic. Based on the results of the activation analysis, tantalum was chosen as a target material due to its better activation characteristics, and helium gas was suggested as a coolant. In addition, activation in a lead medium was performed. After a distance of 55 cm from the lead surface to the neutron incidence, the neutron intensity dramatically decreased; this result indicates very low activation.

Keywords

References

  1. Y.D. Lee, C.J. Park, H.D. Kim, K.C. Song, Design of LSDS for isotopic fissile assay in spent fuel, Nucl. Eng. Technol 45 (2013) 921-928. https://doi.org/10.5516/NET.06.2013.044
  2. Y.D. Lee, C.J. Park, S.J. Ahn, H.D. Kim, Development of lead slowing down spectrometer for isotopic fissile assay, Nucl. Eng. Technol. 46 (2014) 837-846. https://doi.org/10.5516/NET.06.2014.069
  3. Y.D. Lee, N.M. Abdurrahman, R.C. Block, Design of a spent-fuel assay device using a lead spectrometer, Nucl. Sci. Eng. 131 (1999) 45-61. https://doi.org/10.13182/NSE97-100
  4. H.R. Radulescu, N.M. Abdurrahman, A.I. Hawari, B.W.Wehring, Pulsed neutron Generator Facility for Slowing Down Time Spectrometry, ANRCP-1999-29, 1999.
  5. D. Rochman, R.C. Haight, J.M. O'Donnel, A. Michaudon, S.A. Wender, D.J. Vieira, E.M. Bond, T.A. Bredeweg, A. Kronenberg, J.B. Wilhelmy, T. Ethvignot, T. Granier, M. Petit, Y. Danon, Characteristics of a lead slowing-down spectrometer coupled to the LANSCE accelerator, Nucl. Instrum. Met. Phy. Res. A 550 (2005) 397-413. https://doi.org/10.1016/j.nima.2005.04.075
  6. C.J. Park, M.K. Jaradat, L. Alawneh, Y.D. Lee, Metal plate target design for the lead slowing down time spectrometer (LSDTS), Ann. Nucl. Energy 49 (2012) 218-222. https://doi.org/10.1016/j.anucene.2012.05.029
  7. K.C. Song, H.S. Lee, J.M. Hur, J.G. Kim, D.H. Ahn, Y.Z. Cho, Status of pyroprocessing technology development in Korea, Nucl. Eng. Technol 42 (2010) 131-144. https://doi.org/10.5516/NET.2010.42.2.131
  8. S.J. Ahn, J.D. Kim, Y.G. Kim, Y.D. Lee, C.J. Park, Neutron Source Design for Lead Slowing Down Time Spectrometer, ANPU2014, Jeju, Korea, 2014. Nov 9-12, 2014.
  9. W.B. Wilson, S.T. Cowell, T.R. England, A.C. Hayers, P. Moller, A Manual for CINDER'90 Version 07.4 Codes and Data, Los Alamos National Laboratory report, 2008. LA-UR-07-8412, 2008.
  10. D.B. Pelowitz, MCNPX User's Manual, LA-CP-07-1473, Los Alamos National Laboratory, 2008.
  11. J.D. Kim, Y.D. Lee, H.S. Kang, Optimization of operation parameters of 80-keV electron gun, Nucl. Eng. Technol 47 (2014) 387-394.