• The Journal of Information Systems
• /
• v.21 no.1
• /
• pp.1-17
• /
• 2012

Common Method Bias(CMB) may cause the potential inflation of correlations between measures assessed via the same method. The problem of CMB has been well known in behavioral sciences because the survey method with self-reporting is vulnerable to CMB. Thus, the discussion on CMB is still ongoing in the MIS research in US. However, in Korea, the MIS research has never paid attention on the CMB problem. The purpose of this study is to examine the CMB problem in the Korean MIS research. To evaluate the effect of CMB, empirical studies on Technology Acceptance Model(TAM) are selected because (1) TAM is one of the MIS research areas studied intensively, (2) TAM is a theoretical model well supported by the existing empirical studies so that the result of this study would have a great ripple effect when the CMB problem turned out to be serious, (3) CMB is domain-specific. 47 TAM samples (out of 45 studies) from three Korean Journals were selected and the relevant data were collected such as correlation matrixes and the measures of the dependent variable. To find and evaluate the size of CMB, two analytic methods (Marker-Variable Technique and Method-Method Pair Technique) are employed. The result showed that there exists CMB in the Korean studies but the problem is not so serious to distort the empirical testing, compared with that of US studies. However, considering that CMB can contaminate the testing results, Korean MIS researchers should explicitly deal with the problem in designing empirical studies and collecting data.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.1
• /
• pp.53-61
• /
• 2016

PURPOSE. This study conducted an analysis of cost-effectiveness of the implant and conventional fixed dental prosthesis (CFDP) from a single treatment perspective. MATERIALS AND METHODS. The Markov model for cost-effectiveness analysis of the implant and CFDP was carried out over maximum 50 years. The probabilistic sensitivity analysis was performed by the 10,000 Monte-Carlo simulations, and cost-effectiveness acceptability curves (CEAC) were also presented. The results from meta-analysis studies were used to determine the survival rates and complication rates of the implant and CFDP. Data regarding the cost of each treatment method were collected from University Dental Hospital and Statistics Korea for 2013. Using the results of the patient satisfaction survey study, quality-adjusted prosthesis year (QAPY) of the implant and CFDP strategy was evaluated with annual discount rate. RESULTS. When only the direct cost was considered, implants were more cost-effective when the willingness to pay (WTP) was more than 10,000 won at $10^{th}$ year after the treatment, and more cost-effective regardless of the WTP from $20^{th}$ year after the prosthodontic treatment. When the indirect cost was added to the direct cost, implants were more cost-effective only when the WTP was more than 75,000 won at the $10^{th}$ year after the prosthodontic treatment, more than 35,000 won at the $20^{th}$ year after prosthodontic treatment. CONCLUSION. The CFDP was more cost-effective unless the WTP was more than 75,000 won at the $10^{th}$ year after prosthodontic treatment. But the cost-effectivenss tendency changed from CFDP to implant as time passed.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.2
• /
• pp.105-110
• /
• 2015

This study proposes the more improved mathematical model than conventional that for the 3-DOF Helicopter System in Quanser Inc., and checks the validity about the proposed model by performance comparison between the controller based on the conventional model and that based on the proposed model. Research process is next : First, analyze the dynamics for the 3-DOF helicopter system and establish the linear mathematical model. Second, check the eliminated nonlinear-elements in linearization process for establishing the linear mathematical model. And establish the improved mathematical model including the parameters corresponding to the eliminated nonlinear-elements. At that time, it is used for modeling that Particle Swarm Optimization algorithm the meta-heuristic global optimization method. Finally, design the controller based on the proposed model, and verify the validity of the proposed model by comparison about the experimental results between the designed controller and the controller based on the conventional model.

• Restorative Dentistry and Endodontics
• /
• v.39 no.1
• /
• pp.17-23
• /
• 2014

Objectives: This study evaluated the efficacy of Endosolv-R and Xylene in softening epoxy resin based sealer after 1 to 2 min exposure. Materials and Methods: Sixty Teflon molds ($6mm{\times}1.5mm$ in inner diameter and depth) were equally divided into 3 groups of 20 each. AH 26 (Dentsply/De Trey), AH Plus (Dentsply/De Trey), Adseal (Meta-Biomed) were manipulated and placed in the molds allotted to each group and allowed to set at $37^{\circ}C$ in 100% humidity for 2 wk. Each group was further divided into 2 subgroups according to the solvents used, i.e. Xylene (Lobachemie) and Endosolv-R (Septodont). Specimens in each subgroup were exposed to respective solvents for 1 and 2 min and the corresponding Vicker's microhardness (HV) was assessed. Data was analysed by Mauchly's test and two-way analysis of variance (ANOVA) with repeated measures, and one-way ANOVA. Results: Initial hardness was significantly different among the three sealers with AH Plus having the greatest and Adseal having the least. After 2 min, Xylene softened AH Plus and Adseal sealer to 11% and 25% of their initial microhardness, respectively (p < 0.001), whereas AH 26 was least affected, maintaining 89.4% of its initial microhardness. After 2 min, Endosolv-R softened AH 26, AH Plus and Adseal to 12.7, 5.6 and 8.1% of their initial microhardness, respectively (p < 0.001). Conclusions: Endosolv-R was a significantly more effective short term softener for all the tested sealers after 2 min whereas Xylene was an effective short term softener against AH plus and Adseal but less effective against AH 26.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4171-4177
• /
• 2013

Outer tie rod is lighter than other, but there is the trend item weight and the number is increasing due to vehicle performance improvement. Thus, to improve vehicle fuel efficiency, weight lightening is essential. Therefore, this research performed the finite element analysis to investigate the structural performance of the outer tie rod for an electrical vehicle. This study was performed as the preliminary study for a lightweight design of the outer tie rod. The weight of outer tie rod was optimized by adopting the steel material and applying the trial and error method. The strengths due to durability and buckling should be considered in the structural design of an outer tie rod. Furthermore, the meta model-based optimization was applied to obtain its lightweight design, leading to 9 % weigh reduction.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.429-429
• /
• 2007

In this study, it was investigated about the variation of luminance properties in LED backlight with geometrical shape such as prism or lens shape on the light-entering face. Generally, LED light source has the loss in backlight system because it has horizontal direction light. PMMA(Poly-Methyl-Meta-Acrylate) is used LGP(Light-Guide-Plate) in conventional backlight system. PMMA has low refraction angle. so that. horizontal direction light was not used in backlight system. The addition of geometrical shape in light-entering face in LGP improves the luminance characteristics because it prevents horizontal direction light generation in light-entering-face. Prism or lens shape in same pitch disposition was almost same without these treatment such as the value of 1% rising. Besides. It is particular that the gap of these shape such as the value of 0.407~0.22mm prevents horizontal direction light, so then it contributes luminance rising at 5.6%.

• Childhood Kidney Diseases
• /
• v.23 no.2
• /
• pp.59-66
• /
• 2019

Background: Primary hyperoxaluria (PH), a rare inborn error of glyoxylate meta bolism causing overproduction of oxalate, is classified into three genetic subgroups: type 1-3 (PH1-PH3) caused by AGXT, GRHPR, and HOGA1 gene mutations, respectively. We performed a retrospective case series study of Korean pediatric patients with PH. Methods: In total, 11 unrelated pediatric patients were recruited and their phenotypes and genotypes were analyzed by a retrospective review of their medical records. Results: Mutational analyses revealed biallelic AGXT mutations (PH1) in nine patients and a single heterozygous GRHPR and HOGA1 mutation in one patient each. The c.33dupC was the most common AGXT mutation with an allelic frequency of 44%. The median age of onset was 3 months (range, 2 months-3 years), and eight patients with PH1 presented with end stage renal disease (ESRD). Patients with two truncating mutations showed an earlier age of onset and more frequent retinal involvement than patients with one truncating mutation. Among eight PH1 patients presenting with ESRD, five patients were treated with intensive dialysis followed by liver transplantation (n=5) with/without subsequent kidney transplantation (n=3). Conclusion: Most patients presented with severe infantile forms of PH. Patients with two truncating mutations displayed more severe phenotypes than those of patients with one truncating mutation. Sequential liver and kidney transplantation was adopted for PH1 patients presenting with ESRD. A larger nation-wide multicenter study is needed to confirm the genotype-phenotype correlations and outcomes of organ transplantation.

• Physical Therapy Rehabilitation Science
• /
• v.3 no.1
• /
• pp.20-26
• /
• 2014

Objective: The low level lasers currently in the market vary in wavelength, dosage, and frequency. These devices are used with much different clinical pathology. Most notably, some studies claim that wounds heal faster with low level laser therapy due to the fact that bacteria commonly found in wounds are killed by laser light. Systemic and meta-analysis studies found the difficulty of comparison of numerous research studies because of differences in the intensities and frequencies of low level laser treatment (LLLT). The purpose of this study was to determine the effectiveness of LLLT on controlling bacterial growth. Design: Cross-sectional study. Methods: Variables included LLLT dosage and wavelength on 3 bacteria commonly seen in wounds, strains of Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa were used on commercially available 5.0-cm agar plates. Blue, green, and red, ultraviolet (UV) and infrared laser light sources were adjusted to either low or high intensity settings. Five Petri dishes at a time were placed directly beneath laser light sources with the exception of UV which was placed six inches below the suspended light and infrared which was placed directly on top of the Petri dish lid. Each group of five Petri dishes was irradiated for 15 minutes. Results: The results showed no effect of any of 9 different LLLT intensities or colors on bacteria growth compared to sham light. Conclusions: At least for claims of bacterial growth inhibition with LLLT, no support for this claim can be found here.

• The Journal of Korean Society for School & Community Health Education
• /
• v.21 no.1
• /
• pp.33-45
• /
• 2020

Objectives: The purpose of this study is to analyze the research trends on oral health literacy in South Korea and to suggest the direction of future research, Methods: The literatures were searched using KISS, RISS, KMBASE, KoreaMed, Nanet and NDSL. A total of 17,433 documents were retrieved by database searching. The final 34 literatures that satisfied the inclusion criteria were selected for analyzing. A content analysis was performed on 34 literatures on the topics of oral health literacy which had been published from 2012 to 2019. Results: Most of the 34 literatures, 23 articles and 11 thesises were descriptive-correlation studies, but there was no intervention study. The participants studied in the selected literatures were mostly adults followed by elderly and other groups including foreigner. More troubling sufficient samples and sampling methods were lacking at the population level. The validation of the used health literacy instruments was not sufficient. Conclusions: The unification of translation terminology for oral health literacy and the standardized instrument to test oral health literacy are needed. And to improve the level of oral health literacy, studies should be conducted using various variables. It is also necessary to develop the oral health education programs that can improve the level of oral health literacy. In the future, meta-analysis on the oral health literacy are needed for cumulating findings and drawing more reliable and general conclusions.

• Journal of Korean Critical Care Nursing
• /
• v.14 no.3
• /
• pp.113-127
• /
• 2021

Purpose : This systematic review was conducted to identify which dyadic intervention could be implemented for heart failure patient-family caregiver dyads to improve patient and/or their family caregivers outcomes. Method : Eleven databases were searched from their inception to July, 2021. This review considered any randomized controlled trials that evaluated the effectiveness of intervention including heart failure patient-family caregiver dyads. Two reviewers independently evaluated the methodological quality using the Cochrane Collaboration's tool for assessing risk of bias and extracted details of the included studies. The studies included in this review were not suitable for meta-analysis and therefore the results were presented as a narrative summary. Results : Six studies including 900 dyads were included and mainly primary family caregiver of patients was spouse. Majority of dyadic intervention were focused on psychoeducational intervention excepting one study on mobile health intervention. All studies included in this review focused on patients' outcomes compared to family caregivers' outcomes and dyadic outcomes. Individual interventions improved quality of life among heart failure patients and their family caregivers in two articles. The overall quality of selected articles was low. Conclusions : This study provides moderate support for the use of a dyadic intervention to improve quality of life among heart failure patients and their family caregivers. More rigorous high-quality studies investigating interventions to meet the needs of patient and family caregivers in heart failure care are needed.